How to: VW & Audi 3.6, 3.2 PCV valve membrane replacement
Вставка
- Опубліковано 7 вер 2016
- You can buy this part at www.rkxtech.com/products/36-P...
This membrane frequently ruptures causing vacuum leaks and running problems
According to VW & Audi the PCV valve is not a replaceable part. The only sell it with an entire valve cover.
This valve is found in:
Audi Q7 3.6L 2007 - 2013
Audi A3 3.2L 2004 - 2009
Audi TT 3.2L 2004 - 2009
Volkswagen R32L 3.2 2008
Volkswagen Passat 3.6L 2008 - 2013
Volkswagen CC 3.6L 2007 - 2016
Volkswagen Touareg 3.6L 2007 - 2016
Thank you guys for this product! You saved me thousands on repair costs!
Just ordered the kit for my 08 R32 thank you for coming up with this product.
Just got my kit from y'all the other day, will be doing this over the weekend
Great step by step video. Thanks for the tutorial. I got 08 VW Treg 3.6L to do soon
I just purchase #4 kit for my 08 r32.
If it wasn't for that video I will still be going crazy looking for parts at different places thanks again. 👍
Main reason for this fix, there's alot of oil going from the pcv valve to the intake so car burns oil, I have to put about half a quart every 2 weeks driving it daily, I hope thats all I have to fix lol.
Perfect, that's a winner. Got my rocker off and new diaphragm installed in 5 mins... 5 hours to get to it, but the install from there was exactly like the video. Great product by the way, good quality.
What did you follow to remove the intake manifold? I did this repair about 5 years ago and remember the 5 hours but it was all trial and error. would love to see a guide online somewhere.
@@moonman774 same for me really. I ended up pulling front bar with radiator and condenser forward without removing and just undid the lower fuel rail and manifold bolts as they are at the front of the car. I wish I had changed the manifold for the newer two piece black manifold as I had to do the repair again after 2 years.
Ahhh man that's rough. So someone people swap the silver one for the 2 piece?@@Benagiser
@@moonman774 I believe so. The 3.2 motor is 1 piece silver and the 3.6 motor is two piece black.
Hmmm My motor is 3.6 with the 1 piece silver manifold, 2009 Q7
@@Benagiser
thank you extremely helpful. what stumped me was the 3 fuel rail bolts on the driver side on the intake, but once I got past that it a breeze
Major Paine I agree with you. Those 3 bolts plus the fuel rail fitting were no joke. I did the repair in the winter which meant i broke a few clips and plastic vacuum lines.
I just did this repair on my 2010 Porsche Cayenne V6 and the kit was excellent. Problem is now fixed and drives great! Well done.
Hi .. how is the kit after one year ? Thanks
@@smarttv5573 So far so good! :-)
@@512TXSDIY thanks 😊
What problems were you experiencing?? I have a gnarly whistle when it warms up now
@@Nathanstondez420 weird idle issues like the car couldn’t breath or something. I don’t remember the codes anymore since it’s all been fixed now.
Thanks! Nice job! In my case the membrane was not damaged but the spacer and Sprint was mounted wrong 🤦🏼♂️🤦🏼♂️. Congratulations from Brasil!
Glad you were able to find your problem and get it fixed.
Muchas grasias me sirbio de mucha ayuda tus videos
@RKXTECH.com thanks for the tutorial. I purchased your part off Amazon and it fit perfectly.
I am glad we could help out. Please help support our channel and subscribe so we can continue to develop new products and make videos.
Thanks for the great video. Do you add anything to the gaskets when you replace them (intake manifold, pcv valve gasket, etc?) Thanks in advance!
Just ordered the part
Please let me know if this is good for Passat b6 limo 2007, 3.2v6 4motion .250hp fsi....you have any video how to remove the manifold please?!?thank you
Great video 👍
Would you advice the replacement of the rubber membrane only or would yhe whole black pcv valve assembly better be replaced? Mine must be stuck since it's using the security breather
A. SUPER. AWESOME. FIX. TNKS
Awesome video!
Hi when was version 4 released I bought mine at the end of last year how can I tell if its the latest?
I'm ordering one now!
Thank you for your support!
Hi, 2009 cayenne V6 with check engine light ON, fault code P12A2? Is this PCV defective?
Is there any reprogramming needed when this replacement is done?
It appears some old diaphragms might not have holes, but have stretched enough between the middle and outer parts to not be able to apply enough force to overcome the springs. I'll verify with my repair on my 2011 Cayenne 3.6.
damn now I find this :( I just replaced my valve car last summer and I tried looking for that part every where which they only sell with the cover
The throttle body screw takes a 3/8 M10 socket took two weeks for it to come in from Home Depot
Does the membrane come with the new valve cover ??
Fantastic, I ordered yesterday!
Where can you buy the PCV gasket? If you do all this wouldn't you want a new PCV gasket?
My oil pressure light came up and the engine light too... it whistled before now doesn't, will this be the culprit??
Can fit cayenne 3.6 2012... same engine as Q7
I had replaced this membrane on my oil seperator in audi s5 4.2 FSI, and high pitch whistling noise has disappeared! Old membrane was torn. Good.
But, I have a question: is it OK that oil cap is pulled back when i take it away as before (when membrane was broken)? Thanks!
i think is ok! How's easy to open cover to pull membrane? How's working after one mounth usage?
My pvc diaphragm also broke and it is making miss fire when put in neutral. I have purchased the part but i need one week to put it in. Can anyone tell me how long i can drive like this miss firing state without damaging other components.
What dose it do if the membrane is broken...wierd sound from that smal hole?
When replacing this do you have to use new gaskets for when you are putting back the valve cover to the manifold ?
Did you use new gaskets or the olds one seals! Thank you!
Johann Bartz new
Where I could buy the Pcv valve I can’t find it anywhere it’s for GTI vr6 12v
2007 Audi Q7 does the intake manifold need to be removed to get the valve cover off? Thanks
Yes the intake manifold must be removed to get the valve cover off.
PITA to remove.
Me too! How fast do you ship?
All order will ship the same or next business day
Pls can you Post a video on how to remove the intake manifold.Any link to the video on how the intake manifold can be removed will be appreciated
I just did this didnt really make a video.. I took the grill/bumper cover off... 2 bolts on each side just above the headlight on the quarter panel undo those and then 8 bolts almost all the way out but not completely so the aluminum bumper front end will slide out giving you room.. didnt even have to undo the radiator hoses
Cual es la falla ?
Will this fit the Porsche Air Oil Separator for the 996, 986 and 987.1/997.1 ?
wanted to add wiles your there clean the intake carbon
Great tip thanks!
The music sounds like a slower version of boys don't cry by the cure 👀🤷♂️
Are you sure that this part doesn't fit on a VW Eos 2007 3.2 v6 . please let me know.
This will fit the EOS! We will update our website compatibility table with this information.
RKXTECH.com i just buy it on your ebay post, thanks
Bob Dylan where you able to fit this in a 2007 Eos 3.2?
i have same problem on my golf mk5 R32 3.2l v6 . does this valve dits my engine? engine code is BUB
Yes this will fit the MK5 R32!
Ok thx i already purchased one from you on ebay .
K Guemraoui same here. My is currently at the dealership.
Polo pcv valve kit
I got 2006 passat 3.6 code p12A2 is this related to
Yes it is
How can i take that part off my q7 . cause i bought the part but just can't get the valve cover off
Karma Sanders Try searching for Touareg valve cover on UA-cam and see if there is a video that can help.
Don't waste your time people on this. This mamrabe is not the same as oem. I replaced it with this one and it DIDN'T FIX my vacum leak. Replaced the valve cover with oem pvc in it and all problems went away. 08 Touareg 3.6 VR6
Sounds like the diaphragm wasn't seated correctly when you got it back together. I replaced my entire valve cover due to the cover itself being cracked and the new one wasn't assembled correctly. I was getting a TON of vacuum to the crankcase. So much that i couldn't even pull the oil cap off while the engine was running. Had to take all apart again to figure out what was going on and found that the diaphragm wasn't installed/seated correctly. Re-seated it and have had no more issues
F*** me !!!! My dealership told me about this part and it is installed in my 2008 VW R32. If I knew it was that easy to fix I would have done it myself. They made it out to be heart surgery.