To all the learner drivers about to attempt this, make sure you know what revs/speed are suitable for downshifting 2 down. If you’re going fast enough in 4th and immediately shift down into 2nd, you are going to lose your beloved Corolla
Ive almost gone into 2nd on the freeway instead of 4th, thankfully ive been driving my car for a long time so i knew when the rpm started going over 3k something was wrong and clutched in
Actually it's better, lets say you got a 1.9L diesel, your maximum output torque is at 2500-3300 and you drive in 4rd gear, at speed of 80 km/h if you downshift to 3rd gear you get high rpm high torque, but downshifting to 2rd gear is kinda bad, you are limited on how much speed you have, plus rpm ar at maximum 4000 and no longer have the power.
@@cautarepvp2079 in this video specifically he unnecessarily goes through two gears to get from 4th to 2nd. There is no reason to blip twice and shift twice. 3rd gear was 100% redundant Going from 4th to 2nd in this case is not KINDA BAD whatsoever as long as you rev match properly
Well that's why if your rpm's are too high you don't switch down to second you just go to 3rd. This has nothing to do with down shifting twice just to get to 2nd just drop it straight to second. You just gotta know how to drive it's extremely simple. You would not down shift twice on a dirt bike would you 😂. Just because 3rd is your hardest pulling gear don't mean it's going to pull harder then 2nd gear at lower speeds. @@cautarepvp2079
Genuinely curious of the important rev matching in a car. I drive a truck, and rev matching is required on a downshift or else it just simply won't go into gear. Cars have synchronizers so I don't see the purpose.
@@Ryan_Carder car is same as the truck, gotta rev match to downshift, or else you get the jankiest shift of your life, you whole car feels like it just got hit in the front for a sec
@@Ryan_Carder synchros only help to match input speed to output speed, but when the engine is disconnected (i.e. clutch plate pushed away), the synchro has no idea what speed the engine is at, it's only syncing *it's* side of the car (gears, clutch, wheels, etc. Put simply). A rev match is then you matching the engine speed to the wheel speed, stopping your car from lurching and possibly absolutely destroying your power train.
No hate on the Miata guys. I love the bloody thing. But the video has nothing to do with a track, touge, or 'corners' of any kind. Key word: "straightaway" 🚶🏻🚶🏻
@@jt9300 the “straightaway” i was referring to was about an 1/8 mile long at the beginning of the video. look up redwood road near the Chabot Staging area and tell me how straight the rest of it looks 😅. right after that scene i came up on the miata cruising who booked it when he saw me and i tried to keep up, but was not confident taking corners as fast as dude was
In the UK in driving lessons we are taught in our driving lessons to skip gears because overall you get less wear and tear than going thru the gears in order. Most cars in the UK are manuals and our lessons and tests are quite comprehensive.
@@sabagamer3052 they use to teach that yes, now they are less picky about it as long you maintain good control and observation, don't cross over your arms or do something deemed dangerous.
I always find it amusing when people talk about double clutching. Just go from 4 to 2 and rev match. Your car is designed to be able to do that. And you won’t mess up a slower and more complicated double shift. Just know your car, don’t just slam it in 2nd
you’ll put some wear on your synchros but yeah you’re right. double clutching (if done right) will put less wear on your transmission. although if you’re bad at it it will be worse than skipping a gear
If you do this often and want to save wear on your synchros, double clutch and skip a gear. That tends to feel smoother for passengers as well. Regardless, there's no need for a double shift in a non-sequential gearbox and double clutching is not required.
@@_zedf656 how is what this guy did easier than just sticking it in 2nd and flooring it? Honestly sometimes I think you Americans treat manual boxes like dark arts
I had 2 friends in high school who blew up their parents cars doing neutral drops in automatic vehicles. A minivan and a Nissan maxima. Complelty destroyed the transmissions in both of them.
@@Nameschino “more sensitive pedals” that is not a thing. what is a thing is changing your clutches biting point, which could make it appears as more “sensitive”.
Right? The lack of actual driving knowledge (especially for manual gearboxes) hear is abysmal. Nice to see some finds this so obvious! Then again, Americans don't use a gearstick...
@@dippyass4u i think it really depends on the car. older cars like mine (1998 mazda 323) will jerk even if u rev it high. maybe it has something to do with the old components or im just doing it wrong lol
Quite a nice walk through, you can skip the gear but your transmission may want to go back into 4th instead of down to 2nd. By using 3rd it lowers the margin of error a bit. 👍🏿much love fellow car peeps
I had experience and an understanding on manual transmissions before I got my first bike so, I didn’t really freak when I downshifted but. One thing I never experienced before happened. I downshifted one too many times and it caused my back tire to spin slower than the speed I was traveling and it caused my back tire to break traction. It was scary but I’ve done this twice now
@@trappizze22 simple cheap solution mate, car guys talk about rev matching but stuff that term as confusing. So you need to 'blip' throttle on downshift.... DO NOT DOWN SHIFT WITHOUT CLUTCH. It can be a pain to learn to hold front brake and use same hand to blip throttle bit guarantee it works. Try slowly at first.
@@-The_Phantom iv heard it’s bad for the transmission, I learnt to double clutch and have never had problems but I guess it’s alright going straight from 5 to 3 if you rev match
The “drop a gear and disappear “ refers to street bikes. U can most definitely drop gears on a manual trans except cars weren’t built to take that kind of abuse especially if your not (blipping) matching your RPM’s while doing it. Also double clutching is really hard on your clutch pack and pressure plate.
The double downshift is really dependent on your gearing. Most cars if you are cruising in the gear before your overdrive, you won’t have enough rpm in the limiter to drop 2 gears.
I drop from 5th to 2nd seemlessly. It's all about getting very familiar with your speed to rpm per gear ratio, and you'll learn to downshift from any gear to any other gear with practice
the thing is... double clutching is recommended but isnt strictly needed, if you watn to bang your gear double clutchiong should be done to avoid burning up your syncros inside the gearbox, but also you dont need to shift from 4th into 3rd and than into 2nd, if you know your car well you can from 4th gear, clutch in, put in neutral and release clutch, rev up to around where 2nd gear would be (hint: way more rpm) and than clutch in again and bang the 2nd gear in, if you did it well the gear should just pop in really easily because both gearwheels should be about equal speed (thus avoiding accesive syncro wear) and therefore go in really easily and than just release the clutch with the high rpm and just floor it and shift like you usually would. some people also recoomend couble clutching when shifting up 1 gear but thats not really neccessary because thats literally how every normal person driving a manual car drives, therefore they were designed for that, its just the downshifting part which wears out alot of parts when you dont revmatch (mainly clutch and syncros) its like on a bike where u just peddal slowly but are relatively fast and than downshifting and needing to first take a few seconds to speed up your legs to so that you can accelarate faster when you shift down, just that its the engine doing that motion and the clutch taking the difference of speed and converting it into wear and heat. i realized that this comment is alot of technical bla bla but basically when downshifting more than one gear try to revmatch xd source: experience from driving a miata... and yes i know and yes its not a joke, just look at my channel and the videos ive posted xD
Rev matching is still some next level witchcraft to me, but this dude is illuminating the situation so much, I got confidence. Buying a new replacement clutch tonight.
"double clutching" and "rev matching" the only thing those two are good for is putting unnecessary strain on the throw out bearing and friction material, pumping the clutch once and going from 4 to 2 is perfectly fine and a lot more efficient.
Meanwhile, me in electric car: *STEPS ON ACCELERATION HARDER* Edit: alright so everyone complain that it shouldn't be called gas cause it was an electric car so i change it to Acceleration.
The only place you are going to get a legitimate class on manual Rev matching is in a class A truck driving school, or a professional racing school. Both take a lot of money so this skill isn't something that people who know how to do it readily like to teach for free. Good job on you man.
Wow!!!!! When you know a kid didn’t learn to shift from a mentor😳 I was so damn confused how to watch it three times to understand what he was doing. You don’t need third gear when you’re dropping down to second🤣
Bro thinkin he's driving a semi with the double clutching, just learn your rpm's and know what hear you want, clutch in rev to the rpm you know the hear needs for the speed you are going release clutch and hammer down
@@Golden31Eagle He wasn't double clutching, he was downshifting twice with rev matching (I prefer to heel toe, though). I've also driven commercial vehicles before and have a CDL, and in the trucking world, the experienced prefer floating gears; it's easier on the clutch leg. Now if he wasn't downshifting twice, you could assume he was double clutching.
You wouldn’t be downshifting two gears if you’re in the mid to higher rpm range. But if you’re at cruise rpm, slap it down into what ever gear puts you in the power band.
Not double clutching like you should. You’re lucky that 100 shot of nitrous didn’t blow the welds on the intake. Almost had me? You never had me, you never had your carrr
For the old heads... New Chevys have a shift assist gate that won't let you go from 4th to 2nd without doing this so you don't money shift. Also you can research shift-by-wire which completely defeats the purpose of a manual trans.
When i see people saying about blowing out clutch, it hurts my eyes. If you have 4th gear on with low revs and you down shift to 2nd, it will just make revs higher. As long you don't make revs higher than engine is made for, everything will be fine (unless you have not tuned car, because it will rock you like a little baby).
If you're going to go through the effort of double clutching and rev matching anyway you may as well just skip the gear... You do less wear... Going through both gears is only beneficial when you do not double clutch or rev match because The curve of wear is exponential... Going from 4 to 2 does 3 times the wear as it will do to 3 and 2, so you're doing 50% more wear overall.
Just put the gear in neutral when braking and slowing down, depending on the speed when you need to accelerate shift the gear into whatever number your speed is.
Side note, rev matching doesn't work in most new cars because the ecu does it for you when you release the clutch in lower gears. Rev matching can fuck your car up.
Imagine being revved out in 5th, thinking the "drop a gear" rule still applies. You will literally lose all gears, and your pistons might land on the moon
Im still learning to drive manual and i gotta say rev matching is way easier than it sounds. I still have a good amount of trouble accelerating from a stop than i do rev matching.
I've been driving manuals for ever, i would just reg match from 4th to 2nd. Wich makes me curious, is that wrong? Bad for my car? Does that give me less power?
If it’s a newer car with synchros you’d be fine skipping gears. I do it all the time. Synchros are made to mesh the different speeds smoothly and quickly. Obviously know what speed you’re going, because 4th to 2nd sounds scary radical due to over revving possibilities. But it would in a performance mood get you more power, if for example your car made peak hp @6600rpm, and you are in 4th gear @1900rpm, downshift to 2nd @4,000rpm, you’d get a better start and jump. Basically the only time you’d drop a gear to disappear if you’re on a highway and randomly wanna haul, or if u need to pass a truck or something of the sorts. Depends if your car has peak power higher in the rpm range, what speed you are going to determine which gears to be in, and whether your trans is synchro or not
You know the top comment already says to skip gears but he's only recommending it. It should be standard practice, you should skip gears and never downshift the way you trying to say you should you'll be left in the dust by somebody who knows what they're doing. It's also way less wear and tear on the gears you. You just need to actually be able to time it properly for the Rev match. You can even drop three gears if you want depending on what kind of transmission you have. Some cars up there in class actually force you to drop three or four gears to get that kind of output. You just have to be ready to shift so you don't redline the shit out of your car.
Okay so here is a breakdown for ya. He's in 4th Gear and he wants to go to second gear. Let's say for this breakdown his rpm is at 2000 in 4th Gear, 3000 at 3rd and 4000 rpm in second gear. He presses the clutch and uses the gas to increase the rpm to 3000. He then releases the clutch. Now he's in 3rd at 3000 rpm Now he presses the clutch again with a small amount of gas to increase rpm to 4000 and then releasing the clutch. Now he's in second at 4000rpm. The reasoning behind rev matching is to lower the stress on the springs on the clutch when changing gears. if you dont rev match you will have the engine flywheel and the trans clutch spinning at different speeds, when you release the clutch the springs will absorb the forces when the clutch and flywheel collide. if you hard drop the clutch a lot it can not only damage those springs but also the 2 wheels at the same time. conclusion, rev matching if when you rev up the engine to the necessary rpm during downshifts that matches the rpm for the gear you want to shift to at your current speed. im not a car expret but i hope you understand
@@firewhisperer oh wow thanks! I’ma go ahead and practice this. Every time I try to downshift either by rev matching or even with the heel toe method I keep messing up
@@Anxi3ty_ Don't worry about it, just takes practice and time, and then you'll be able to rev match just fine. I personally think a double shift is unnecessary if you're wanting to drop a gear and take off. Instead, skip a gear. Let's say you're in 4th gear at 2000 RPM. 3rd and 2nd gear need to be rev matched at 3000 and 4000 RPM, respectively. Instead of a double shift, rev straight to 4000 and get her in 2nd gear. 4th - > 2nd. You can also double clutch in this scenario, which I prefer to do, but it's also not necessary and adds another step where mistakes can be made. So, just practice your rev matching and don't be afraid to skip gears. Just make sure if you do skip that the low gear your shifting too won't be above your engine's redline. Practice the movements slowly so you can focus on accuracy and getting your muscle memory down. When you feel pretty comfortable, start speeding it up, incrementally increasing how quickly and smoothly you can do it until it's second nature. After this, if you wanna throw in a double clutch or a double shift for fun, then do it! Good luck my friend!
Literally the whole benefit to having a standard over an automatic is the fact that you don't have to use sequential gear shifting. So this is an extracept for no reason. If you're driving a standard vehicle that has a transmission properly built, you should be able to go from 5th to 3rd with no problems. As long as you're not maxing out your larger year prior to downshifting.
You're allowed to skip gears by the way. I do this all the time. It's less work on you and less wear on that throw out bearing.
Facts it's easier too
Just came to say this
I was thinking that
Little more wear on the synchros but yea I do it too 😂
@@zaydabbas1609 agreed
Rev matching my Civic at 3am is basically the only thing that keeps me alive these days
Ohhh so thats you I keep waking up to
@@yeskonerism sorry not sorry
Well, I'm the 3pm Golf I guess. 😂
@@thesecondchillguy5697 HH
My vw polo is a zonda r in my eyes
To all the learner drivers about to attempt this, make sure you know what revs/speed are suitable for downshifting 2 down. If you’re going fast enough in 4th and immediately shift down into 2nd, you are going to lose your beloved Corolla
Ive almost gone into 2nd on the freeway instead of 4th, thankfully ive been driving my car for a long time so i knew when the rpm started going over 3k something was wrong and clutched in
@@tobyngenn98263k rpm 💀💀💀gotta push er to at least 8k
I sent the focus to 4th to 2nd and it almost made a knocking noise in the trans 😂
@@yomamacrib3297bro not everyone is street racing
@@tobyngenn98263k rpm LMFAO
Higher rev match can go straight from 4th to 2nd. You don't need to go through 3rd unnecessarily unless you wanna hear two downshifts and go slower
I was same thinking why he waste time whit 3rd
Thanks, I don’t get why people would do it other than this it kind of makes me angry
Actually it's better, lets say you got a 1.9L diesel, your maximum output torque is at 2500-3300
and you drive in 4rd gear, at speed of 80 km/h if you downshift to 3rd gear you get high rpm high torque, but downshifting to 2rd gear is kinda bad, you are limited on how much speed you have, plus rpm ar at maximum 4000 and no longer have the power.
@@cautarepvp2079 in this video specifically he unnecessarily goes through two gears to get from 4th to 2nd. There is no reason to blip twice and shift twice. 3rd gear was 100% redundant
Going from 4th to 2nd in this case is not KINDA BAD whatsoever as long as you rev match properly
Well that's why if your rpm's are too high you don't switch down to second you just go to 3rd. This has nothing to do with down shifting twice just to get to 2nd just drop it straight to second. You just gotta know how to drive it's extremely simple. You would not down shift twice on a dirt bike would you 😂. Just because 3rd is your hardest pulling gear don't mean it's going to pull harder then 2nd gear at lower speeds. @@cautarepvp2079
Don’t think anyone has demonstrated rev matching so simply yet effectively on this platform before
Genuinely curious of the important rev matching in a car.
I drive a truck, and rev matching is required on a downshift or else it just simply won't go into gear.
Cars have synchronizers so I don't see the purpose.
@@Ryan_Carder soo best case scenario without rev matching is your car will slow down a bit, worst case it can lock up tires send you sideways
@@Ryan_Carder car is same as the truck, gotta rev match to downshift, or else you get the jankiest shift of your life, you whole car feels like it just got hit in the front for a sec
@@Ryan_Carder synchros only help to match input speed to output speed, but when the engine is disconnected (i.e. clutch plate pushed away), the synchro has no idea what speed the engine is at, it's only syncing *it's* side of the car (gears, clutch, wheels, etc. Put simply). A rev match is then you matching the engine speed to the wheel speed, stopping your car from lurching and possibly absolutely destroying your power train.
You haven't been here long enough or more trash has cluttered the platform over the past 7 or so years (likely more).
"There's a miata in front that's probably much faster" 💀💀
Never underestimate the handling of a Miata.. being "fast" isn't always just about power. ESPECIALLY in the corners..
@@aaronlong4754 yeah miatas are slow
Go to the touge one time and challenge a Miata driver you'll see what he means by "they're probably faster"
No hate on the Miata guys. I love the bloody thing.
But the video has nothing to do with a track, touge, or 'corners' of any kind. Key word: "straightaway" 🚶🏻🚶🏻
@@jt9300 the “straightaway” i was referring to was about an 1/8 mile long at the beginning of the video. look up redwood road near the Chabot Staging area and tell me how straight the rest of it looks 😅. right after that scene i came up on the miata cruising who booked it when he saw me and i tried to keep up, but was not confident taking corners as fast as dude was
In the UK in driving lessons we are taught in our driving lessons to skip gears because overall you get less wear and tear than going thru the gears in order.
Most cars in the UK are manuals and our lessons and tests are quite comprehensive.
i never learnt to rev match in my driving lessons.
@@KindOfyeah They usually do not teach rev matching in driving school. At least not where I'm from
Weren't they teaching you to feed the wheel?
@@sabagamer3052 they use to teach that yes, now they are less picky about it as long you maintain good control and observation, don't cross over your arms or do something deemed dangerous.
I wish there were more manuals in the US. I work at a shop and end up driving cars all day and I only see a manual maybe once or twice a week.
Imagine a world where everyone forgot how to drive stick, then this guy comes along and tells you that you have to shift gears one at a time.
Never will this happen. Only if every car had become electric
i can imagine worse things
@@marvin2678 anyone can, but my point remains that it would be hilarious.
@@bjf5027you don't have to, but there's really no reason to skip gears either
I always find it amusing when people talk about double clutching. Just go from 4 to 2 and rev match. Your car is designed to be able to do that. And you won’t mess up a slower and more complicated double shift. Just know your car, don’t just slam it in 2nd
you’ll put some wear on your synchros but yeah you’re right. double clutching (if done right) will put less wear on your transmission. although if you’re bad at it it will be worse than skipping a gear
If you do this often and want to save wear on your synchros, double clutch and skip a gear. That tends to feel smoother for passengers as well. Regardless, there's no need for a double shift in a non-sequential gearbox and double clutching is not required.
As a beginner, double shifting is way easier
For older cars its good to double clutch, not so important for more recent manuals
@@_zedf656 how is what this guy did easier than just sticking it in 2nd and flooring it? Honestly sometimes I think you Americans treat manual boxes like dark arts
some kid is gonna try this and blow up his mom's motor trying to drop into 2nd gear at 70mph
edit: nobody cares about how long your gears are
Interestingly... my first car would go 70 in 2nd gear. But not a MT
Said kid got a h2 that goes 200 in 2nd
@@cashmoney3801 bruh you can’t even full throttle an h2 anything before 5th gear or the front end will be in the ground behind you
@@kobyavery9408 I actually have an MT car that does ~75mph in 2nd, albeit at redline but still
I had 2 friends in high school who blew up their parents cars doing neutral drops in automatic vehicles. A minivan and a Nissan maxima. Complelty destroyed the transmissions in both of them.
I love downshifting from 5th to 3rd for overtaking 😈👊🏻🔝😂
How’s your gearbox cuh
@@Ratioedbynoprofilepicturein that case I presume you double declutch at all times?
@@fifossucrilhosno que muy chinggon follow the rules
Her bio :- Jason 🤍🔐
Jason's bio :- 🏁 2016 WRX STI "drop a gear and disappear"💨
You spelled Jason wrong, or was that on purpose
@@Ricemuncherlegit thanks for correcting me 😀
that's the only way bro
Could you not pump the gas a bit more and rev match from 4th straight to 2nd, skipping 3rd?
you could.
you might as well double clutch at that point
if you’ve got worn out synchros it might be tough to do that but on a healthy car i would do that instead, yes.
I guess he changed his stock pedals to more sensitive ones since its so quick he probably doesn't bother skipping idk
@@Nameschino “more sensitive pedals” that is not a thing. what is a thing is changing your clutches biting point, which could make it appears as more “sensitive”.
Wat......... Just.... Shift to 2nd. I go from 5th to 2nd on the motorway every day lmao, just rev match to a higher RPM XD
This video is for beginners chill 😂
But yeah I do just as you said too
Right? The lack of actual driving knowledge (especially for manual gearboxes) hear is abysmal. Nice to see some finds this so obvious! Then again, Americans don't use a gearstick...
@@dippyass4u Exactly. Some other comments even saying how going from 5th to 2nd causes "more wear" on the synchros, making it sound ohh-so dangerous.
@@dippyass4u i think it really depends on the car. older cars like mine (1998 mazda 323) will jerk even if u rev it high. maybe it has something to do with the old components or im just doing it wrong lol
@@archilou4500 sounds like you are coming off the clutch too fast or not giving it a tad bit of gas when you are transitioning through gears
Manual guys-"i can shift from 4th to 2nd"
This guy- "go from 4 to 3 to 2"
yea i still dont get why he bothered to short shift on 3rd while going down XD
Its cooler @@DSkulle1
Quite a nice walk through, you can skip the gear but your transmission may want to go back into 4th instead of down to 2nd. By using 3rd it lowers the margin of error a bit. 👍🏿much love fellow car peeps
I did this on my dirtbike a few times on accident and it freaked me the f out
I had experience and an understanding on manual transmissions before I got my first bike so, I didn’t really freak when I downshifted but. One thing I never experienced before happened. I downshifted one too many times and it caused my back tire to spin slower than the speed I was traveling and it caused my back tire to break traction. It was scary but I’ve done this twice now
@@trappizze22 simple cheap solution mate, car guys talk about rev matching but stuff that term as confusing. So you need to 'blip' throttle on downshift.... DO NOT DOWN SHIFT WITHOUT CLUTCH. It can be a pain to learn to hold front brake and use same hand to blip throttle bit guarantee it works. Try slowly at first.
Bro don't know it's possible to skip gears ☠️
LOL
So can u go from 5 to 3 rd or sum ?
@@Jdjdjxjxjcj double clutching, say you’re going from 5-3, clutch into neutral, clutch out, clutch into 3rd, rev match, clutch out
@@TM-fx5le well, you actually can clutch once and pass directly to the 3 right?
@@-The_Phantom iv heard it’s bad for the transmission, I learnt to double clutch and have never had problems but I guess it’s alright going straight from 5 to 3 if you rev match
The “drop a gear and disappear “ refers to street bikes. U can most definitely drop gears on a manual trans except cars weren’t built to take that kind of abuse especially if your not (blipping) matching your RPM’s while doing it. Also double clutching is really hard on your clutch pack and pressure plate.
The double downshift is really dependent on your gearing. Most cars if you are cruising in the gear before your overdrive, you won’t have enough rpm in the limiter to drop 2 gears.
That’s why he revmatches
@@serps2833 that has nothing to do with already being too high in engine rpm to be able to drop 2 gears within the next 5 seconds
Thanks all I need is a car now.
FR 😂😂😂😂😂😂😂
That’s manual
Lmao me taking this advice knowing damn well I only ride a motorcycle and play GT7
Ryan Reynolds as Deadpool
Tom Hanks as Forest Gump
Anthony Hopkins as Hannibal Lecter
Also... Don't do 2 gears down in a 5 speed if your gear ratios are 4.44 in the differentials.
You'll get slower immediately and hit the rev limiter.
But it sound cool
Not true I have a five speed you dk how to drive
I'm impressed I can down shift some what smoothly from 3rd to 2nd and gone, usually it wouldn't let me but now I can
I drop from 5th to 2nd seemlessly. It's all about getting very familiar with your speed to rpm per gear ratio, and you'll learn to downshift from any gear to any other gear with practice
Slick. Only learned manual in a car after years of riding bikes and ATVs and never figured this out with my feet.
I love videos like these that also show the pedal work as well as the shifter
Driving shift for the first time “ik what I’m doing”
"Driving Manual is fun but when you're stuck in traffic you only go 1,2,1,2"
1, 2, neutral, 2
How about 1 clutch 1 😂
How to drop a gear and disappear
That's exactly what Paul walker did lmaoo
Too soon? /S
@@greg4254 oof. Stole my comment :)
Paul walker was in the passenger seat
Fucken dead...
Literally 😂
@@tripclipgt6573 Well, Han was driving and he still alive.
the thing is... double clutching is recommended but isnt strictly needed, if you watn to bang your gear double clutchiong should be done to avoid burning up your syncros inside the gearbox, but also you dont need to shift from 4th into 3rd and than into 2nd, if you know your car well you can from 4th gear, clutch in, put in neutral and release clutch, rev up to around where 2nd gear would be (hint: way more rpm) and than clutch in again and bang the 2nd gear in, if you did it well the gear should just pop in really easily because both gearwheels should be about equal speed (thus avoiding accesive syncro wear) and therefore go in really easily and than just release the clutch with the high rpm and just floor it and shift like you usually would.
some people also recoomend couble clutching when shifting up 1 gear but thats not really neccessary because thats literally how every normal person driving a manual car drives, therefore they were designed for that, its just the downshifting part which wears out alot of parts when you dont revmatch (mainly clutch and syncros) its like on a bike where u just peddal slowly but are relatively fast and than downshifting and needing to first take a few seconds to speed up your legs to so that you can accelarate faster when you shift down, just that its the engine doing that motion and the clutch taking the difference of speed and converting it into wear and heat.
i realized that this comment is alot of technical bla bla but basically when downshifting more than one gear try to revmatch xd
source: experience from driving a miata... and yes i know and yes its not a joke, just look at my channel and the videos ive posted xD
Rev matching is still some next level witchcraft to me, but this dude is illuminating the situation so much, I got confidence. Buying a new replacement clutch tonight.
You're going to double clutch from 4/3 seconds when you're trying to slow down at a stop sign
Or never double is also good
Me: watching this while I don't owned manual car anymore 🤣
Lolol
"double clutching" and "rev matching" the only thing those two are good for is putting unnecessary strain on the throw out bearing and friction material, pumping the clutch once and going from 4 to 2 is perfectly fine and a lot more efficient.
Double Clutching 🙅🏽♂️ Triple Granny Downshifting 😄👍🏽
Meanwhile, me in electric car:
*STEPS ON ACCELERATION HARDER*
Edit: alright so everyone complain that it shouldn't be called gas cause it was an electric car so i change it to Acceleration.
Can you really call it a gas pedal when there’s no gas?
@@NinjaoftheEnd damn
@@NinjaoftheEnd the electric pedal
@@jthegoat2313 moarrrrr speed pedal.
@@NinjaoftheEnd well.... acceleration pedal
The only place you are going to get a legitimate class on manual Rev matching is in a class A truck driving school, or a professional racing school. Both take a lot of money so this skill isn't something that people who know how to do it readily like to teach for free. Good job on you man.
Only in America is this a top shelf technique lol. I bet there are grannies in Europe who are doing this.
bro my mind can’t comprehend
Its such a satisfying feeling when u do it correctly
I remember doing this the first time my father let me drive his hilux i think he wont let me drive now
THAT HILUX A DIESEL WASN'T IT?
@@_9maggot hell yeah it was
I like this how to videos.. see u at the Shop!!
Funniest thing in the world..quoting a movie that started out making fun of double clutching while simultaneously telling us to double clutch
Wow!!!!!
When you know a kid didn’t learn to shift from a mentor😳
I was so damn confused how to watch it three times to understand what he was doing.
You don’t need third gear when you’re dropping down to second🤣
Drop a ⚙️ & disappear 💨
drop a 💩 & disappear 🧑🦽💨
I like how every American is arguing about the best rechniques for manual shifting while the rest of the world just laughs at them 😅😂
“When you do it quickly it looked something like this”. Massive jolt😅
6th to R
Never let em know your next move 😎
I like how he keeps his eyes on the road and not the camera when he's talking
Who doesn't love a bit of rev match action!
Wups, intructions unclear, dropped a gear and 3rd disappeared 😳
Bro thinkin he's driving a semi with the double clutching, just learn your rpm's and know what hear you want, clutch in rev to the rpm you know the hear needs for the speed you are going release clutch and hammer down
He wasn't double clutching, that was because he was going to 3rd and then 2nd.
@@grantb7677 go watch the video he presses in out revs in gear out in out gear out revs in gear out
@@Golden31Eagle He wasn't double clutching, he was downshifting twice with rev matching (I prefer to heel toe, though). I've also driven commercial vehicles before and have a CDL, and in the trucking world, the experienced prefer floating gears; it's easier on the clutch leg. Now if he wasn't downshifting twice, you could assume he was double clutching.
It's really satisfying driving a semi tho.
If your engine rev is high in 4th gear, don’t do this! Shifting 2 gears down will break your engine
You wouldn’t be downshifting two gears if you’re in the mid to higher rpm range. But if you’re at cruise rpm, slap it down into what ever gear puts you in the power band.
@@jgetscensored7837 that’s true
I absolutely love rev matching downshifts, makes for fun driving and sounds badass too.
and... just the next video was "how replacement your clutch" what a coïncidence 🤣
"single clutching like a granny and not double clutching like you should"
-DT
This is what i was looking for in the comments! Hell yeah dude! 😎
Now me and the mad scientist need to pull the block apart and redo the burn piston rings.
granny shifting...
That's not how he said it lmao 🤣
@@paygecook3772 "granny shifting not double clutching like you should"
now i know what vin diesel meant when he told me that I'm not double clutching like i should
Grannie shiftin
Not double clutching like you should. You’re lucky that 100 shot of nitrous didn’t blow the welds on the intake. Almost had me? You never had me, you never had your carrr
@@johnnychimpo7539 i love you
This aint double clutching
For the old heads... New Chevys have a shift assist gate that won't let you go from 4th to 2nd without doing this so you don't money shift. Also you can research shift-by-wire which completely defeats the purpose of a manual trans.
I know all this and have used it before but still want to watch these types of videos 😂
yoooo the bmw badge is out
See I flick a paddle in skedaddle
When i see people saying about blowing out clutch, it hurts my eyes. If you have 4th gear on with low revs and you down shift to 2nd, it will just make revs higher. As long you don't make revs higher than engine is made for, everything will be fine (unless you have not tuned car, because it will rock you like a little baby).
Watching people masterfully shifting gears is pretty interesting to me, probably because i have never driven a car with manual transmission.
If my car is already at 6-7k rpm in the fourth gear then down shift into 2nd, I'll get into my mechanic in the fastest way right? Right??
💰💰
If someone thought being at 6-7k rpm in 4th, and dropping it into 2nd is a good idea. They'll need their head testing first and foremost.
No u r wrong your car will disappear if u do that don't believe try it, it really works
Works better if you shift it into Race mode. You’ll get there way faster
🤣🤣🤣 Going through 3rd on a manual in order to get from 4th to 2nd must be the most American thing I have ever seen on a manual car. 🤣
Most uk thing I've seen Ina car
If you're going to go through the effort of double clutching and rev matching anyway you may as well just skip the gear... You do less wear...
Going through both gears is only beneficial when you do not double clutch or rev match because The curve of wear is exponential... Going from 4 to 2 does 3 times the wear as it will do to 3 and 2, so you're doing 50% more wear overall.
Just put the gear in neutral when braking and slowing down, depending on the speed when you need to accelerate shift the gear into whatever number your speed is.
Easiest way.
Not sure how this would work since if i would rev match to 3rd at about 4-5k rpm then down shift again to 2nd and my rpms would be 7k or higher
differs based on you cars gearing
he talking about cruising in 4th so 4th would be ~2000 3rd ~3250 and 2nd ~4500 just depends on gearing
Side note, rev matching doesn't work in most new cars because the ecu does it for you when you release the clutch in lower gears. Rev matching can fuck your car up.
"Instructions unclear, drop from 5 to 2 going 80 mph"😂
“I just gained 3 miles an hour” 😭idk why this is so funny
Lesson learned: Miata only needs 2 peddles. Clutch and gas.
I'm glad this man is being roasted for not knowing he could skip gears.
Remember that if you fuck up your piston is going to mars
I love these manual tips shorts
Miata gang 😎
Lmaooooo canyon mode 🔥
yeah just drop to 2nd, put revs up to about 4-5k and ease the clutch out, once fully engaged floor it until the natural shift point.
This is amazing information. Thank you
Imagine being revved out in 5th, thinking the "drop a gear" rule still applies. You will literally lose all gears, and your pistons might land on the moon
Im still learning to drive manual and i gotta say rev matching is way easier than it sounds. I still have a good amount of trouble accelerating from a stop than i do rev matching.
Paul Walker did it like no one else. He dropped a gear and dissapearerd into his dashboard.
Woth rev matching my friend taught me is look at your rpms and know where you want to be put it close where you want and downshift
"How to drop a gear"
Drops 2 gears
Whoa, I was so focused on what he’s saying didn’t realise he’s driving a 350z
Im soo glad I have an automatic
Imagine not skipping gears in 2022
Cruising mode to canyon mode.
Hahahahahahahaha
I've been driving manuals for ever, i would just reg match from 4th to 2nd. Wich makes me curious, is that wrong? Bad for my car? Does that give me less power?
If it’s a newer car with synchros you’d be fine skipping gears. I do it all the time. Synchros are made to mesh the different speeds smoothly and quickly. Obviously know what speed you’re going, because 4th to 2nd sounds scary radical due to over revving possibilities. But it would in a performance mood get you more power, if for example your car made peak hp @6600rpm, and you are in 4th gear @1900rpm, downshift to 2nd @4,000rpm, you’d get a better start and jump. Basically the only time you’d drop a gear to disappear if you’re on a highway and randomly wanna haul, or if u need to pass a truck or something of the sorts. Depends if your car has peak power higher in the rpm range, what speed you are going to determine which gears to be in, and whether your trans is synchro or not
@@M54B30_fan yea for older cars or project cars it can damage the engine tho
@@mnstrmassacre7670 how would it damage the engine it’s all trans unless you’re talking about crankwalk.
@@mnstrmassacre7670 for a higher milage trans just double clutch if you are going to skip or just do it whenever you are just regularly downshifting
@@ethanol-fb never thought of that thanks 😊
I did that now my motors 2 miles back on the interstate 🤣jp good video
You know the top comment already says to skip gears but he's only recommending it. It should be standard practice, you should skip gears and never downshift the way you trying to say you should you'll be left in the dust by somebody who knows what they're doing. It's also way less wear and tear on the gears you. You just need to actually be able to time it properly for the Rev match. You can even drop three gears if you want depending on what kind of transmission you have. Some cars up there in class actually force you to drop three or four gears to get that kind of output. You just have to be ready to shift so you don't redline the shit out of your car.
Thanks big dawg
This confused me even more ;-;
Okay so here is a breakdown for ya.
He's in 4th Gear and he wants to go to second gear. Let's say for this breakdown his rpm is at 2000 in 4th Gear, 3000 at 3rd and 4000 rpm in second gear.
He presses the clutch and uses the gas to increase the rpm to 3000. He then releases the clutch. Now he's in 3rd at 3000 rpm
Now he presses the clutch again with a small amount of gas to increase rpm to 4000 and then releasing the clutch.
Now he's in second at 4000rpm.
The reasoning behind rev matching is to lower the stress on the springs on the clutch when changing gears.
if you dont rev match you will have the engine flywheel and the trans clutch spinning at different speeds, when you release the clutch the springs will absorb the forces when the clutch and flywheel collide. if you hard drop the clutch a lot it can not only damage those springs but also the 2 wheels at the same time.
conclusion, rev matching if when you rev up the engine to the necessary rpm during downshifts that matches the rpm for the gear you want to shift to at your current speed.
im not a car expret but i hope you understand
@@firewhisperer oh wow thanks! I’ma go ahead and practice this. Every time I try to downshift either by rev matching or even with the heel toe method I keep messing up
@@Anxi3ty_ Don't worry about it, just takes practice and time, and then you'll be able to rev match just fine. I personally think a double shift is unnecessary if you're wanting to drop a gear and take off. Instead, skip a gear. Let's say you're in 4th gear at 2000 RPM. 3rd and 2nd gear need to be rev matched at 3000 and 4000 RPM, respectively. Instead of a double shift, rev straight to 4000 and get her in 2nd gear. 4th - > 2nd. You can also double clutch in this scenario, which I prefer to do, but it's also not necessary and adds another step where mistakes can be made. So, just practice your rev matching and don't be afraid to skip gears. Just make sure if you do skip that the low gear your shifting too won't be above your engine's redline. Practice the movements slowly so you can focus on accuracy and getting your muscle memory down. When you feel pretty comfortable, start speeding it up, incrementally increasing how quickly and smoothly you can do it until it's second nature. After this, if you wanna throw in a double clutch or a double shift for fun, then do it! Good luck my friend!
@@BradChadley thank you I appreciate it
Literally the whole benefit to having a standard over an automatic is the fact that you don't have to use sequential gear shifting. So this is an extracept for no reason. If you're driving a standard vehicle that has a transmission properly built, you should be able to go from 5th to 3rd with no problems. As long as you're not maxing out your larger year prior to downshifting.
That's granny downshifting
Hahaha teaching me how to shift and you litterally just blowing up your shit with unnecessary shifting. nice rev match bud, try it from 4 to 2
*Tap dances while sitting*: “simple ‘nough”
The only thing relevant about double clutching is that it sounds cool. It's not necessary with the newer transmissions.
me at 55mph with a ZF8 in 8th gear like "I dont think one is gonna cut it, lets drop four."
bro double clutched