Won't using that much oil ruin the filter and/or MAF? I want to clean my Revo filter but might just buy a different filter because of the lack of instruction and reviews on how to clean it.
You cannot use washing up liquid. It will sort of work but I did some tests with spraying the ITG oil on a plastic bottle. Washing up liquid didn't really touch it when I tried to clean it off but the ITG cleaner melted the oil clean off with no effort. It is formulated specifically to chemically react with the oil and break it down quickly and efficiently. You will get close with washing up liquid but it really is going to take a long time and you wont get all the dirt out. I thought I would try washing up liquid on my own filter before my cleaning and re-oiling kit turned up. I thought it was clean. Then, when my kit turned up, I used the solvent and a load more grit was released from way inside the filter. If you are worried. The cleaning and re-oiling kits are not a use-once item. Plenty in there for several cleans and re-oils.
illogik Yes. You don't need to use anywhere near as much oil as shown in the video. I ruined a Ktec air filter following the oiling advice shown. Use less and massage in.
Paper will clog way faster than these. If you renew your paper filter every couple of months then fair play but most people don't. ITG filters don't perform much better than a new paper filter, but the paper filter clogs RAPIDLY. It's not about flowing more air, it's about not restricting it artificially as soon as the dirt builds up. 😁 ...they also sound really cool as well.
How to clean an ITG air filter - brilliant!
this was heartfelt cleaning +5hp
hi. I live in turkey. I can't find the oil you used here. What is the technical specification of the oil you use for the filter?
Thanks for this!
The cleaning advice is good, however you don't need to use anywhere near as much oil as shown.
Won't using that much oil ruin the filter and/or MAF? I want to clean my Revo filter but might just buy a different filter because of the lack of instruction and reviews on how to clean it.
I was thinking it was a bit much
Hello, what foam is that that you use, and what foam (texture and density) can be used?
Can I use any type of oil, i.e the same 5w30 oil I use for my engine?
Only ITG recommended oil and cleaner are suitable to use on our filters. Please contact your nearest distributor for supply. Thanks
Can the K&N filter cleaner be used with the Maxogen filters?
did you find the answer?
@@ruhadam58 i used the kit in the end, just followed the instructions but didn’t go max with the oil. That pumps a pain to use though!
@@daimill1728 thanks for the answer. I live in Turkey and I couldn't find the cleansing oil. I am looking for alternative cleansing oil.
Any alternative cleansers?
At what water temperature can the filter be washed? Cold, hot or warm? Thanks
Hi, just warm water is fine.
what kind of oil should we use to re-oil? here in the states
Hi Matthias, our distributor Eurosport www.eurosportacc.com/collections/itg can help you.
what if i do not have clening fluid? what is that made up with? can i apply shampoo or dish washing liquid?
Only ITG recommended oil and cleaner are suitable to use on our filters. Please contact your nearest distributor for supply. Thanks
As the video shows, yes you can use dish washing liquid. They are using Fairy washing up liquid.
You cannot use washing up liquid. It will sort of work but I did some tests with spraying the ITG oil on a plastic bottle. Washing up liquid didn't really touch it when I tried to clean it off but the ITG cleaner melted the oil clean off with no effort. It is formulated specifically to chemically react with the oil and break it down quickly and efficiently.
You will get close with washing up liquid but it really is going to take a long time and you wont get all the dirt out.
I thought I would try washing up liquid on my own filter before my cleaning and re-oiling kit turned up. I thought it was clean. Then, when my kit turned up, I used the solvent and a load more grit was released from way inside the filter.
If you are worried. The cleaning and re-oiling kits are not a use-once item. Plenty in there for several cleans and re-oils.
Should the filter sit and "dry" after it's been oiled or is it ready to install instantly after oiling?
Billy Joe I would leave it overnight on a piece of cardboard or newspaper to allow any excess oil to drain off.
Sod this I hoover mine
What is sod and hoover?
are there any risks to over oiling the filter with the technique in the video?
illogik Yes. You don't need to use anywhere near as much oil as shown in the video. I ruined a Ktec air filter following the oiling advice shown. Use less and massage in.
I heard a mechanic say to use less oil but to keep the filter in a plastic bag and massage it in. Made sense.
I have just done that. Large zip-lock bag. Massage in, leaving over night to soak through and then some more massage tomorrow to be sure.
gloves lol ? u use dam chemical oil killing solution
The oil is super sticky tho, I just done it this morning
What a faff. Life's too short. Just use paper one and bin it.
Paper will clog way faster than these. If you renew your paper filter every couple of months then fair play but most people don't. ITG filters don't perform much better than a new paper filter, but the paper filter clogs RAPIDLY. It's not about flowing more air, it's about not restricting it artificially as soon as the dirt builds up. 😁
...they also sound really cool as well.