Here's why your Motor making that Ticking Noise

Please NOTE: The bulk of my time in the comment section is spent on comments and questions from SUBSCRIBERS, If you not subscribed, or leave off the question asking are you subscribed, I have to get to those questions after im done with all the subscribers questions. Please understand, this very important. Also guys/gals, if you need to get in contact with me ASAP concerning info or help, please use the CashApp $20 donate feature to $JohnnieRayThomas. Simply donate and a message will come to my phone and I can get in contact with you ASAP, thanks. Or simply leave your comment or question in the comment section. Thanks for viewing an Online Mechanic Tips video with JT the Car Guy. As always ask any questions you may have but please consider subscribing to the channel because I speak about a lot more. Please use the donate links to my Paypal or my Cash App if you wish to donate and help support the Channel. This also sends a direct message to my cell phone alerting me of assistant needed quickly, which means I can get back to you quickly. Thanks in advance. If this video in any way helped you save time and money, please consider donating.
Paypal Donate Link here: www.paypal.me/OnlineMechanicT...
Cash App here: $JohnnieRayThomas
#JTtheCarGuy

[@paulp7561]

I never welded before buying a Titanium flux core welder from harbor freight specifically to do this job (I had 4 broken bolts and failed at extracting them). After watching a few YT vids and about an hour of practice I was able to knock it out with no issues. Welder is definitely the way to go when getting these bolts out!
Side note: I had the exhaust manifold planed at the machine shop before re-installing b/c I heard that exhaust manifold warping is the cause of the broken bolts.

[@raystanton238]

Yes, the manifolds warp and break off the studs usually at the ends of the manifolds so have a machine shop plane them flat to get a good seal. If you just replace the gaskets, you'll have the same issues later on. The old warped manifolds are already "seasoned" so its best to have them planed and re-use them.

[@jhood8367]

Great enthusiasm and content...welders should be a shop tool, like a set of torches, but for like 150 on Amazon, those little Chinese welders kick ass and take names too...small footprint, throw it in a drawer until u need it then just plug it in and pull the trigger...done...im in upstate ny and everything exhaust, suspension and frame needs a torch, welder, nut buster or air hammer and chisel...

[@brianandglendaharkin9457]

All the spatter went down the exhaust port hole 😮🇦🇺.

[@unclemarksdiyauto]

That MOPAR penetrating fluid is good stuff! Even the FordTechMakuloco channel (Brian) uses it! (If I remember right.) Pretty sure he says he buys it by the case. It works.

[@Dwajo-9]

Teamwork that's what it's about

[@bluehills38]

You have great content 👍 Thanks for the video ❤

[@OnlineMechanicTips]

Thanks for tuning in

[@robgoss8187]

I watch all your videos love em man. I have a 2022 rubicon 3.6 e torque and a 2024 ram 5.7 hemi e torque love both vehicles but worry about the etorque in the long run. What’s your thoughts on the etorque system?

[@sheerwillsurvival2064]

Man you got good team mate spent all that time on your work. JT man learn how to weld bro 🧑‍🏭

[@justpray365]

Yep. He should learn to weld and have a small welder for these jobs. This kind of welding is easier than welding things that have to be perfect.