#68 Dichroic Slide Fun

I'll show you how easy it is to use Dichroic Slide (Dichro Slide). In the video I use dichroic slide from a couple of companies but I'm sure there are many more to pick from.
Dichroic Slide
GoFusing.com
GlassHopper.com
DichroicInc.com
Firing Schedule
500˚F (260˚C) per hr to 1450˚F (785˚C) Hold 10 minutes
Cool to room temperature
Gluing bails
Etch w Dremel type tool
Glue bail with E-6000 or Goop
Remove excess glue
Wait 24 hours
Cure glue in 275˚F (135˚C) oven for 20 minutes
*******************************************************************************************
Products I use can be found in my Amazon shop. By using this affiliate link you help me earn a small commission at no extra charge to you.
www.amazon.com/shop/susanmcga...
********************************************************************************************
_________________________________________________________________
If you like what you see please: Like - Subscribe - Share
Follow me on...
Facebook.com/SusanMcGarryGlass
SusanMcGarryGlass
SusanMcGarryGlass.com
Email me @
[e-mail]
I encourage questions & comments!
Thanks for watching.
Happy Fusing Honey Bunnies!

[@LAURA093058]

My dichroic slides are on their way! Thanks for another great video!

[@ellenmurphy2150]

Hi Susan.Always good to see you.Had no idea anybody made Diochric glass paper.And I didn't know you can't sell Disney stuff either.Makes sense cause of copyrights. Love. your videos!

[@bonnienieman3414]

another great video, I love the way you teach and your wiliness to share what you know!!!!

[@lesselavie7675]

Great video...thanks!

[@CaptMike]

I wondered how well that stuff worked. Great video!

[@SusanMcGarryGlass]

It's great stuff!

[@alkiezrus]

Thanks for another great video. I was unaware of dichroic slide paper and I’m now off in search of a U.K. supplier.

[@carolynlindberg851]

Can you use dichro slide on any type of glass-opaque or transparent-or does it ONLY work on black or white opaque glass?

[@gustavotobon7042]

Hello, beautiful, can these be used in resin or silicone molds? Thank you

[@SusanMcGarryGlass]

I don’t know. You’ll have to give it a try & let us know.

[@chpow4475]

Have you tried it with the microwave kiln? I saw on another video with the smaller kiln that they recommended 70% power for dichroic glass.

[@SusanMcGarryGlass]

Ch POW I have not tried this in a microwave kiln but if I did I would probably use a lower power at first. If I were to use a small kiln with an infinite dial I would probably use a lower power at first. I would mainly use a lower power because of the glass, not the dichroic. In fusing there are so many factors including the type of kiln, type of glass & type of dichro that it’s impossible to make a blanket statement.

[@nobe1966]

Susan thanks for another great video. I have a question: After you paste the bead into the e-6000 glue. How do you adjust the klim to 100 degrees? Is there a relaxation plan? Is there a hold? Did you actually put it in your home baking oven?

[@SusanMcGarryGlass]

I believe you are asking about gluing the bail onto the glass pendant. After it has dried for 24 hours I put it in my kitchen oven set at about 275 degrees F for about 20 minutes. נפתלי ואור לי בן אליהו

[@nobe1966]

@@SusanMcGarryGlass Thanks so much, Susan, I was so scared to put in the home oven, but came out great, thank you very much

[@TomKatRanch]

Where do I find the description info?

[@SusanMcGarryGlass]

Below every video is a description

[@glynesmewton7033]

Can these be done in a microwave kiln?

[@lorettas4443]

Hi, there! Does the dichroic slide paper have a COE?

[@SusanMcGarryGlass]

Loretta S dichroic slide does not have a COE so it can be used in any glass. Isn’t that awesome!