Good work Harry, I’m enjoying watching the process. I find that the first stitch joining the welt, is to pull the thread through half way and make sure both ends even up, then continue stitching using the jerk needle, rather than tying a second thread to the first. As you say, there’s many different ways to do it, and you’re doing a great job. All the best 👍
When plying a short length, what I do is overspin the thread, then fold it in half and let it ply itself from the fold back to the tips. This way it is less likely to unply itself, although the adhesive helps with that too.
Regarding the drop spindle for plying, look up drop spindle for wool spinning. I suspect the principal is quite the same with wool as with thread. Great videos! So glad I found them. I’ve learned a lot. Thank you!
Neat. Just so. I get such pleasure out of watching your progress and the most interesting bits are when you are firing up your brain to improvise some fiddly bit. And I'm jealous of your tools, if I'm honest.
I love watching these videos. You have a unique set of tips & takeaways that you just don’t see anywhere else. I am perplexed on one thing though: I cannot find grooving tool comparable to the one you use here. Unsure what available tool will work. Do you have any suggestions?
Me wife was thinking I watched some obscure chsnnel. She came running out of the kitchen asking: did he just say a ball's hair? I laughed my ass off before i told her it a boar's hair.
Fascinating and informative as always, Harry. Cheers, Steve P.S. On a more flippant tangent, the names of cobbling paraphernalia always remind me of Rambling Sid Rumpo's ditties.
Ooooo.. (admiration).. Your groover is much sharper than mine. . Look up "drop spindle " I have done a 2 ply with a drop spindle and of course there is more than one correct way of doing it... I did one line on my thigh from a ball.. the other on the spindle feeding over my spindle hand. Did the twist against the thigh... twist the spindle.. let it drop toward the floor between my knees.. if needed the knees can grab the spindle and give me a chance to regain control before a knink becomes a nightmare.
Ah, welts... I can still hear the instructors shouting at my 16-year-old younger self that "I haven't polished the welts" when I joined the Royal Navy many years ago...
Some people use the Chinese patcher machine that is readily available...I have no knowledge of it, but you will find lots of videos here with people using it. I suspect you need to be prepared to fettle them a bit.
Hello Harry! After I watched your videos I am attempting to repair my boots, I needed an awl like the one you have, I looked for it at Amazon and I got one but is not as good as the one you have, I want to purchase a good one like yours! does not need to be the same, just strong, the ones at Amazon/Ebay are crap, Do You know where can I purchase one? Thanks so much in advance! @@harryrogers
Hi George Barnsley of Sheffield UK have very good awls....you will find all this in my shoemaking book How To Make Handmade Shoes A Step By Step Guide 😂
OLD LEATHER SMITH here, GREAT JOB, I make moccasins 4 Ren Faire people, any length asked 4 at the sit down, I purchased a gismo that makes thread 4 rigging on ship models that I use 2 make stronger thread, I also like porcupine quills 4 needles, needles and awls are bent on my anvils round horn, I also use a hook with a rectangled closed handle 4 more control, GOD'S BLESSINGS ✝️⚾🙃
Penelope, I have a Shop, I also require a sit down, by phone, in person in my shop, or at yours, if you R in another STATE BY PHONE WILL WORK, I am in Texas, GOD'S BLESSINGS ✝️⚾🙃
Hi some medium temper russet leather, close fibered 2.5mm thick is ideal for typical shoes. I cover all this in my book Making Handmade Shoes A Step By Step Guide on Amazon. Best regards Harry
Hey , how are you doing buddy . Where could a youngster learn this Lost trade of Cordwaining and Cobber. I’m talking fine quality material handcraft American Made . Like the good ol days . Where could one learn this trade. I’d pay for this craft . PLEase let me know , get back with me
Harry, try the worshipful company of cordwainers cordwainers.org they may be able to provide the info you are looking for. By the way you are doing an excellent job! I was trained in shoemaking and measuring for bespoke shoes and for a first go you are doing really well.
The number of ads on your videos has increased dramatically recently. There were about 10 ads on this video.I think this has happened on UA-cam generally a precursor to making us all subscribe and pay.
I always get excited when I see another shoe video on the Channel
The awesomeness of that video title is because I haven't watched it yet and have absolutely no clue what any of that means lol It's fantastic.
Magnificent description and demonstration of the boar's bristle preparation. (Improvised very well!) Thanks so much.
Thanks Scott I was worried it would not show up on camera!
This is a really enjoyable video. Thanks for sharing your learning journey!
Thanks David
As always very informative, That bit of stitching looked tricky & a bit of an R sole to do. Well l!!!, someone had to say it.
Very interesting as always. Keep up the excellent work.
Superb Harry. What a labour of love. I'll never again complain about the price of a pair of shoes!
Good work Harry, I’m enjoying watching the process. I find that the first stitch joining the welt, is to pull the thread through half way and make sure both ends even up, then continue stitching using the jerk needle, rather than tying a second thread to the first. As you say, there’s many different ways to do it, and you’re doing a great job.
All the best 👍
Thanks very much for the tip...so much to learn with this.
I agree with you about Bedo's. He's brilliant - and very amusing. Let's continue . . .
When plying a short length, what I do is overspin the thread, then fold it in half and let it ply itself from the fold back to the tips. This way it is less likely to unply itself, although the adhesive helps with that too.
Another great instalment, the shoes are looking good. The stitching method is excellent, a great job. Thank you for sharing, regards, Chris.
So good Harry I was stuned when you said about the bores brissel amazin to see can't wait for the rand
All the best ash
Thanks Ash..that will be next!
Oh to have half of your patience! Great work as always Harry 👍🏼
Thanks very much Dekk
I congratulate you ! Well done. Bravo!! I enjoy watching you progress.
Best wishes
Tony
Thanks Tony
respect man Welts i remember being VERY hard.
Regarding the drop spindle for plying, look up drop spindle for wool spinning. I suspect the principal is quite the same with wool as with thread. Great videos! So glad I found them. I’ve learned a lot. Thank you!
Thank you so much for sharing this videos, i feel so relaxed when i watch you working and jealous of your workshoo view haha
Thanks very much...having had a morning of videos going slightly wrong its good to get your message.
Neat. Just so.
I get such pleasure out of watching your progress and the most interesting bits are when you are firing up your brain to improvise some fiddly bit.
And I'm jealous of your tools, if I'm honest.
Thanks. The surprising thing is that a lot of these tools are sold in a very sorry state for very little, and with a bit of work they clean up great.
Fascinating project Harry.
Thanks Frank.
I love watching these videos. You have a unique set of tips & takeaways that you just don’t see anywhere else. I am perplexed on one thing though: I cannot find grooving tool comparable to the one you use here. Unsure what available tool will work. Do you have any suggestions?
Nicely done Harry. Though your twine seems to be hemp, not flax.
Me wife was thinking I watched some obscure chsnnel. She came running out of the kitchen asking: did he just say a ball's hair? I laughed my ass off before i told her it a boar's hair.
interesting historical techniques, these shoe vids are pleasant, i watch bedos leatherworks too
Bedos is great!
Fantastic. Very instructive. One small point, the thread is not flax, it's hemp - marked "chanvre" in French.
Thanks very much.
Fascinating and informative as always, Harry.
Cheers,
Steve
P.S. On a more flippant tangent, the names of cobbling paraphernalia always remind me of Rambling Sid Rumpo's ditties.
Thanks Red Svain. 😊
Very interesting. Thanks for this video. Where did you source your curved awl and the curved stitcher awl/needle?
George Barnsley of Sheffield will sell these...I think I bent an old one off Ebay in a flame to get the curvature I wanted.
Would be nice if you put this in a separate playlist as shoemaking.
I downloaded them offline :)
Good tutorials that go in depth are hard to find.
Thanks Adam...I might do that soon...thanks again.
Great project! I don't quite grok the ´'to deep' to much inner edge left? to close to the outside?
Thanks for sharing
Ooooo.. (admiration)..
Your groover is much sharper than mine.
.
Look up "drop spindle "
I have done a 2 ply with a drop spindle and of course there is more than one correct way of doing it... I did one line on my thigh from a ball.. the other on the spindle feeding over my spindle hand. Did the twist against the thigh... twist the spindle.. let it drop toward the floor between my knees.. if needed the knees can grab the spindle and give me a chance to regain control before a knink becomes a nightmare.
Thanks Stephen that's great.
Ah, welts... I can still hear the instructors shouting at my 16-year-old younger self that "I haven't polished the welts" when I joined the Royal Navy many years ago...
Wow..how these things stick...I will think of that next time I polish shoes!
I really wish I could get my hands on a singer patcher sewing machine. So I can make shoes and handbags on it.
Some people use the Chinese patcher machine that is readily available...I have no knowledge of it, but you will find lots of videos here with people using it. I suspect you need to be prepared to fettle them a bit.
I thing you should probably be looking for information on using a " drop bobbin " to ply tread.
Yes thanks it's very similar. I tried spinning some flax in an earlier video, it's more tricky than wool!
if you spin the thread the opposite way from its first spinning, you don't need a ton of the wax to make it stay.
Thanks very much Nicole.
i have tried various thread,s, and all rot when under water, in wet weather conditions. any ideas anyone.
What is the thickness needed for the welt? can it be any thickness? Thanks.
Hi it will depend on the type of shoe, 4mm for lighter, 5mm for heavier as a rough guide
Hello Harry! After I watched your videos I am attempting to repair my boots, I needed an awl like the one you have, I looked for it at Amazon and I got one but is not as good as the one you have, I want to purchase a good one like yours! does not need to be the same, just strong, the ones at Amazon/Ebay are crap, Do You know where can I purchase one? Thanks so much in advance! @@harryrogers
Hi George Barnsley of Sheffield UK have very good awls....you will find all this in my shoemaking book How To Make Handmade Shoes A Step By Step Guide 😂
OLD LEATHER SMITH here, GREAT JOB, I make moccasins 4 Ren Faire people, any length asked 4 at the sit down, I purchased a gismo that makes thread 4 rigging on ship models that I use 2 make stronger thread, I also like porcupine quills 4 needles, needles and awls are bent on my anvils round horn, I also use a hook with a rectangled closed handle 4 more control, GOD'S BLESSINGS ✝️⚾🙃
Thanks that sounds fascinating.
Do you have a shop or a website? I'd like to have a good pair of moccasins
Penelope, I have a Shop, I also require a sit down, by phone, in person in my shop, or at yours, if you R in another STATE BY PHONE WILL WORK, I am in Texas, GOD'S BLESSINGS ✝️⚾🙃
What thickness is the welt ?
Hi some medium temper russet leather, close fibered 2.5mm thick is ideal for typical shoes. I cover all this in my book Making Handmade Shoes A Step By Step Guide on Amazon. Best regards Harry
Hey , how are you doing buddy . Where could a youngster learn this Lost trade of Cordwaining and Cobber. I’m talking fine quality material handcraft American Made . Like the good ol days . Where could one learn this trade. I’d pay for this craft . PLEase let me know , get back with me
As I guess you are in the US, try and have a chat with Trenton and Heath, or Texas Traditions. Good luck.
@@harryrogers yes I’m in Los Angeles thank u
Harry, try the worshipful company of cordwainers cordwainers.org they may be able to provide the info you are looking for. By the way you are doing an excellent job! I was trained in shoemaking and measuring for bespoke shoes and for a first go you are doing really well.
you're from UK don't you
Yes UK.
@@harryrogers what's city?
The number of ads on your videos has increased dramatically recently. There were about 10 ads on this video.I think this has happened on UA-cam generally a precursor to making us all subscribe and pay.