The dealer "WILL" make or brake a relationship. Can't tell you how much I hate my Kioti CK3510SE and largely due to Manchester Motors in Manchester Maine. Just a horrible dealership model. LS, treat this guy like he's family.
Beautiful setup! DJ did a great job presenting, and was very close on his guess for added weight with our Beet Juice Tire Ballast. The 17.5-24 rear tires on the LS 357 require 62 gallons for a 75% recommended fill. At 10.7 pounds per gallon that adds over 1,300 pounds of out-of-sight ballast. If any viewers are interested in how much weight Rim Guard can add to their unit, our website has a Tire Fill Tool with over 2,200 tire sizes that should be able to help you.
Gallons ?, pounds per gallon ? I'm glad that we changed to standard Systeme Internationale metric units in 1973. I was in Intermediate/Junior High then, so can mostly get by in either system, but certainly it was far easier using Metric for Maths calculations in High School and Trade Technical college classes. One litre (or water) weighs one kilogramme, and put 1,000 of them together and you have a Metric Ton (or Tonne), which would occupy a space of a cube, one metre long along each side. I do still think of a car's fuel consumption in miles-per-gallon. I calculate all the litres I buy and kilometres I drive then convert it back at the end. If the car is only doing 20 mpg, then I need to check it for problems. If it's between 30 and 40 mpg, then things are going well. (That is of course, Miles Per Imperial Gallon. LOL, silly Yanks, they even get their gallons and quarts wrong, LOL smiley face !)
@@KiwiCatherineJemma Interesting! There is definitely logic behind the metric system that seems to make good sense. It's all about what your exposed to! We purchase milk, fuel, and other things in gallons which makes it easy to visualize / compare. A gallon of milk weighs 8.6 pounds and RG is 20% heavier at 10.7 pounds per gal for reference.
@@RimGuardBallast Yep, we used Imperial measures here, including 240 pennies making 20 shillings which make One NZ Pound currency (originally based off old British Pounds). But changed to decimal currency, dollars and cents, in 1967. As I said, weights and measures, including gallons, pints and quarts, inches, feet and yards, changed over about 1973 from memory. And the TV weather report changed from Fahrenheit to Celsius (with just a month of so of showing both units). People especially my generation and older, still often use old measures in words of explanation. ("I'm on Empty, I must bung a few gallons in the tank, before the weekend. I have to go and pick up some Four-by-Twos at the timber place on the way"). So yeah, now we are in the 97% of the World's population using the standardised S.I. Metric System. Only the US along with Burma and few places else are still in the 3% using the old British Imperial, or another old non-standard system of weights and measures. Some places still retain some old non standard units for historical reasons. The Japanese still use their old archaic measure for alcoholic drinks. I'm told.
Glad to see you have a safer tractor; weight makes a BIG difference!!! Some people think LG is a off shoot of New Holland. But the truth be known New Holland and Case International are paired up. LS tractors are a subsidiary of the LG Corporation. Also LS makes tractors for New HOLLAND under a 100hp?!?!? I know in LS start up they had considerable amount of electronic issues; I will be following your adventure with LS. What I have found through the years of being a CAT&CUMMINGS knuckle buster is that ground connections are critical to sensors!!! The best example that comes to mind is my single mom niece who bought a used riding mower (CHEAP) and was told it needed a battery!?! I checked it out and the battery appeared to be good; the problem was where the ground cable was bolted to the frame! Cleaned the connections and applied a little Never Seize and walla problem SOLVED!!! I have a ANTIQUE riding mower and the current battery is somewhere in the age of at least five years old and it's a Walmart battery which most say they are a one year battery??? Grounding is very important as is PREVENTIVE MAINTENANCE!!!!!!!!!!!!
DJ from Sandy Lake Implements did a very nice job for the LS company. It’s so important to have a dealer that is knowledgeable, reliable and helpful. This looks like a great partnership.
I bought a 41hp open station LS in 2013, 800 hrs on it now. It's been a great machine and done everything I needed it to. I really love the big front tires. My only regret is not getting a cab tractor!
First, you said “machine” alot. Just remember, thats my thing. Thats a nice tractor, perfect fit for your needs and for being 6’5”. Looking forward to seeing what it can do. Also, props to DJ. He is a natural on camera and did a great job explaining.
Thanks to people like you, I went up to the next size tractor and got myself a TYM T574HC. We've got a 16 acre farm, and 54 chickens and a couple of pigs, and about 1/2 the land is in woods. We cut firewood for heating so we got loaded tires and a 3rd function valve as well. Picked up grapples, 48" forks, a 66" leveling box (we have a 1200' gravel driveway) and the bucket it came with. Our tractor is much like the one you just got. We've only got 12 hrs on it = got it last Thursday, and love. Hope you enjoy yours as much as we're enjoying ours.
I’d give a hard look at Kioti if you’ve got dealer support in the area. I love my DK5310SE, it’s a 50HP hydrostatic machine and it’s been incredible useful on my 20 acres
@@ecossearthur I’ve got a TYM T654 Power Shuttle on 20 acres. Such a nice tractor! Make sure you have a good dealer before you buy…do your homework. There’s a couple of good TYM owner groups on Facebook with people that will help answer any questions you have.
Years ago I had Two Agco MasseyFergesons built by LS. Great Tractors that I used hard for 27 years Custom Farming. My next one will be a LS for sure. Thanks
I kind-a did the same thing .... almost. I did do-diligence and looked through many ... many brands. Also thought I'd need 50-60 HP. Checked out a few dealers. Kind-a settled on the Kioti brand. Went to the closest dealer 52 miles away. Just gave the dealer a list of things I thought I'd be using the tractor for. He indicated that the RX 7320 would do all I needed. Well .... that was not in my price range and I thought that much more power was unnecessary. BUT .... the dealer asked me what "Tim-the-Tool-man Taylor" would say .... MORE POWER!!!. I tried the RX73 model, then the NX55. Yes ... there was a difference. But, still, I was racking my brain on making a decision. Don't you hate it when going through all the turmoil on those "IMPORTANT" decisions! Ended up get the RX 73. Now 3 years later and 400 hrs of operation ....... I DID make the RIGHT choice!! And ... have NEVER looked back on thinking 'Maybe I should've". Just remember ..... "MORE POWER"!!!! Oh ... ho ... ho ....
Adam you hit the nail on the head with this video and should be a must watch for people buying their first tractor without having any experience operating one. So many people go out and buy a compact or subcompact tractor thinking that it will able to do all the tasks on their property and once they start using it they suddenly realize that they bought a tractor that is to small and it lacks the horsepower to get the job done. Years ago a friend gave me some great advice when I was going to buy my first tractor and he said , “ big tractors can do small jobs, but small tractors cannot do big jobs.” Great video and take care.
I didn’t realize LS made tractors that size?? Good to know, just needs a third SCV on the loader and hydraulic top and tilt kit and good to go in my book
When I retired and bought a 20 acre place I had zero tractor experience. The local dealer sold me a JD 1025R and all the implements. It's a really great and reliable machine but I wish he'd have talked me in to a bigger model. This little guy has been able to do everything I need but it just takes me a little longer than a bigger machine.
The LS company sounds like a great one! You did a great job of comparing the two tractors without any negative comments on either one! Great job, Adam!! I hope you can get LS a lot of business & they can help you own this tractor. I think we'll need a few extra videos to see all the things it'll do!! 🤔😉👍God bless you and your family!! I hope y'all have a blessed Christmas season! Thank God for His gift of Jesus to us!! ❤️ 👍
Nice tractor, Adam! It should serve you well. Thanks for being upfront regarding your arrangement with LS. You're always a straight shooter, no BS kind of guy so your opinions and suggestions are helpful to me. The snow blower is a nice addition and also provides the benefit of some additional rear ballast. Look forward to seeing it in action!
Congratulations on the tractor upgrade Adam. As an LS owner myself I am excited to see you on an LS and to here your honest opinion and experiences with an LS tractor.
As Kyle from Spicer Design has repeatedly reminded us of your height…..I feel that the new LS fits your size better. I am the same height as you and am aware that we sometimes look like we are the adult riding the kids go cart. When people ask my height I tell them I’m 5’ 17 1/2”! Make them do the math, Lol! Feel free to use it yourself! Will be interesting to hear your feedback on the new addition to your property! Nice video once again!
Looking forward to see how this tractor performs. The color caught me off guard. The color does not matter as long as it performs and holds up over time. Your channel will be good for LS brand awareness . Competition is always good, it makes companies make better products and address issues.
Nice! Finally, a UA-camr that's not bought by corporations. It's hard to find a UA-cam channel these days that's not bought. They always try to push products; most don't tell you the pros and cons of products or they really try to talk it up. Thank You, seriously, for not being bought. I just found your channel and now I'm a subscriber 🙂
Before I moved to the acreage, I bought an old Ford 3000 gas open station. One winter of pushing snow on a half mile driveway got old real fast. After my house in the city sold, I went to the local Massey dealer. Sat in a 1742 cab tractor and said yup, this one's for me. Never started or drove it. It just fit.
Wow that is awesome Adam. In 2007 I was ready to buy a tractor and had allergies really bad so that made the cab decision for me. Never once have I regretted the cab! Warm and dry in the cold and nice and cool and clean when it’s hot and dry. I have a Kubota L3940 cab and it is my best piece of equipment. Someday I hope to build my channel and have some kind of partnership with an equipment company . Really enjoy your videos and look forward to seeing what you do with the tractor.
I’ve been watching your series on your new storage building. I have to admit that this video sold me on subscribing to your channel. Hearing someone honestly admit to having tractors given to them is refreshing. Sometimes people forget that much of what they see is sponsorship advertising and the UA-camrs don’t have to actually spend hard earned money on the product they are showing. Pushing products because they pay you makes someone a sellout. You sir are not one of them. Please never lose sight of that like some others have unfortunately done on UA-cam.
CONGRATULATIONS! My first tractor was a Kubota L2501 HST. That model doesn't have a single "bell or whistle," but I learned about tractors w/it, and from that decided what I wanted / needed. I then bought a cabbed MT3-57, but mine is a power shuttle vice an HST. I wanted a "stick shift" rather than the HST, because you get a pinch more power and I just prefer a "stick" over an "automatic." The only thing I don't like about it is that the room in the cab is a bit tight. Truthfully, it's okay when I'm just driving / working, but when I need to move around in the cab, it's tight. I FINALLY figured out where I could put a toolbox, and I'm VERY HAPPY w/the location and ease of installation and use. I can send you some pics w/written descriptions if you like, but it does NOT require ANY modification to the tractor. If you look @ the FEL boom on the right side of the tractor, you'll see a single 5/8" hole @ the back of the boom (cab end of boom). I used a piece of 4" x 1/4" angle iron that was about 12" long for a "shelf." On one end I drilled a 5/8" hole through the vertical part, and put a short 5/8" bolt w/washer (as a spacer) through it and that hole on the back of the FEL boom. The angle iron is held in place by the bolt on 1 end and it rests on top of a grease fitting "shroud" on the other end. It can't come off that grease fitting "shroud," and it doesn't hamper the function of the loader or anything else. I also took a "standard" ammo can and drilled a 5/8" hole through it on 1 side near the bottom, on the end closest to the lid hinge. It rests on the angle iron "shelf," and is held in place by the same 5/8" bolt. I don't have to move the box to get to the grease fitting to grease it. When I open the box, the lid opens toward the rear of the tractor and just misses the running light (you could of course mount the box 180 degrees the other way, so that it opened toward the front). It's worked great for over 2 years, and again, if I took it off the tractor, you'd never know it had ever been there! I watch your channel, and I'm sure that tractor will serve you well; again, congratulations! : )
Kinda sad to see the Kioti leave. It was what brought me to your channel 4 years ago when I was searching for my first tractor. I ended up with a CK3510SE and I couldn't be happier. One size up would help feel a little more stable when moving full totes of firewood, so I totally understand the upgrade. I gotta disagree with getting a cab. As a desk jockey, when I'm outside, I want to be outside. Hope the LS treats you well.
Have heard Mike Morgan, Outdoors with the Morgans, repeatedly discuss "what's the best brand" and his advice was to find a dealer network that has great support & service.
Adam. Sunday morning viewer here. I've written this b4, when I watched your first tractor comparison vid with the charts and evaluation ~ that was a great confirmation for me buying my first "used" tractor (unseen) and off MKTplace. I find value in the CPA analysis you do. Now my Case D-25 is working great and I am learning how to operate it, improving on my skills. That said the size and turning radius is what I needed for my 5 acres lot with the two small woodyards. This LS partnership is perfect for your 15 acres of fields and 30 acres of woods. I look forward to learning more about the LS 57 hp tractor and what it can do. Keith
GOOOOOD MAAAAAAAAWNIN EVERYONE!!… Congrats on the sponsorship/partnership with LS. You’re a stand up guy so Im Sure your honesty on the reviews will be factual. Thanks for sharing. Have a Day!😊
Adam Have watched you grow into your land, your machines and love for it all for quite some time. You will find the link peddle handy. When moving fork loads from here to there. Just moving the machine back and forth around the yard. Even when roading the tractor, just like a car or truck with a throttle peddle it has its application. I find when loading, digging, or lifting large loads with the front, mowing, it's better to Disengage the link and use a constant rpm. This allows you to push into a pile and lift at a higher rpm power( hydraulic rate) Also, not sure about how the tractor initiates it's Regen. Operating at lower rpms, idle, tends to place the unit into Regen a bit more. Not a problem, that's what it's there for but keep in mind when using the link a lot. Also there is a lifespan to a dpf before it needs cleaning or replacement. Quite a long life though. When you do use the link peddle try setting the throttle lever above idol. My sweet spot is around 1100 rpm. This allows for cleaner starts ( moving forward or backward) from a static position without some lag that would exist at a low rpm or just idol setting. It is a handy feature and I'm glad I have it on my unit. Kioti DK4710cab. Oh, good move with the cab! You won't regret at all. John Columbus NJ
Hey John, I have already fallen in love with the link pedal. And you are right for just driving around it’s great but for doing loader work using the tradition throttle lever is best. Took me all of about an hour to figure all that out haha
@@HometownAcres perfect! Also I did put a radio with Bluetooth in my cab. At first I thought may be overkill but now when mowing, or loading or whatever for an extended period it's nice to have some music going, and for phone calls. I also use Midland Gmrs two way radios on the property, way easier then texting or calling back and forth when working with others or even when my wife is trying to find me.. lol. I put a mobil unit in the cab. You would even be able to talk to Your neighbor Doug. Anyway best wishes, Happy Holidays! John
I bought an LS XU6168 back in 2019 and I absolutely love it. It’s 65 hp to the pto and has a cab. It is small enough to do small jobs and it is certainly big enough to run my 12’ batwing mower. You should love it !
New viewer and subscriber here, excited to follow along. I sat on an LS at my local fair this year and i must say, when my wife and i finally purchase a homestead and we need a tractor, LS is deff on my consideration list
I started with a 70 hp tractor. I did have some experience on a neighbor's 35 hp tractor. It has been almost perfect for my projects but I am now at the point I no longer need this large a tractor. A smaller tractor is something that will suit me better going forward. I am sure there might be a time in the future when the bigger tractor would be better, but to be honest I really won't NEED a tractor but appreciate the usefulness of one. I think the LS is going to be a good tractor for you and your needs.
I am glad you are able to be open and honest about the review. Sometimes, companies don't want negative feedback. I want to know the good, the bad, and the ugly. Kudos to LS for not limiting your review. This tells me that they have confidence in their products. I look forward to seeing it in the future and what you think. Thanks for sharing your experience with this tractor and in the future.
I made the same mistake. Started with a 25hp open station. Within 2 years I traded up to a 50hp Massy Ferguson with cab. Carzy the difference in usability. You'll settle into this real quick. Happy for you.
I did the same thing. I bought a open station 40 hp tractor. I recently updated to a cab tractor and 60+ hp tractor. The bigger tractor can lift 1 ton. There are a few things like IBC totes full of wood and 1 ton fertilizer/seed bags that the bigger tractor can handle. Nice upgrade Adam!
I have a 357 cab tractor shuttle shift, and I absolutely love it. My only issues I have with the tractor is that the safety switch on the seat is very sensitive. Sometimes when I push the clutch in I stall the tractor because of the weight shift from pushing the clutch in another thing that I would change is the style of the loader bucket. It is hard to see when you’re doing loader work how much you actually are digging in other than that it’s been a great tractor very reliable and I would suggest when you order one get it with the third function on the front also add more lights to the top of the cab of the tractor so you can point them in the directions that is needed to clearly see around the whole tractor. When you have the bucket on the front. The headlights are pretty much useless. I do not have my tires filled but it is a very well balanced tractor.
When lifting heavy items near the top of your range, make sure you raise the rpms to almost max. Your hydraulics will get alot more power and you will be able to lift that machine higher if you want.
Congrats on the new tractor. One bad part of going to a bigger machine, in now all of your implements are too small! Cant wait to see you put it in action.
Also, congrats on having the ability to get to use a tractor in this way. Consider it a blessing. Also, good on LS for allowing you to be honest. I love my LS. I have the MT225 for our 25 acres and so far it's done everything I've thrown at it and more. The reason I went with LS was because of Sandy Lake Implement. They were phenomenal to deal with and are known in our area for their service. Not to mention their a small locally owned and operated dealership. Looking forward on hearing your thoughts on it!
3 point mounted snowblower??? Hope you have a very limber neck, a good neck massager, and a wife who is willing to use that massager on you. After having operated a 3 point mounted snowblower for hundreds of hours, never again. Good luck!!!
Can’t wait to see this in person! Also really looking forward to a 6 month or 1 year review after you’ve really put it through its paces. Congrats again to both you and LS!
Hit one of the hornet nests with 4 Morgan Horses pulling a plow and it is a wild time until you cut the leads to let them off the trees. Talk about doing strange designs in the field. My Dad did that as a young man plowing the field to plant corn. Wild time. New Hive.
I have a deep appreciation for the honest, straightforward, and truthful videos and reviews you do Adam. Honestly, it keeps me watching your videos. Down to earth and full of facts, rather failures or accomplishments you keep it real in a world that sugar coats most everything. Keep the great videos coming Adam. 👍🏻
I usually just open my back window when hooking up to three point attachments and reach in and adjust the height like that. Not a huge inconvenience. Most of the time I can back right up to the implements and hook up to the quick hitch and just reach out the back window and lock the quick hitch. Most non pto implements I can hook up without getting out of the seat.
Congratulations on the upgraded tractor Adam. I am sure that the increased lift capacity will come in handy when you're moving logs around. Stay safe, healthy and warm. Bill H from Cranberry Township
Gonna be interesting to follow this series Adam. When I was shopping for a tractor I tried out the LS and I did not feel Comfortable. being tall as You but bigger built it did not fit well. ( You can see me in Jon's Built to last Video) before My house fire I almost had the Ck3510 open station. But because I had to move some heavy stuff to My new place I went with the DK 4510 open station Shuttle shift. I did not want a cab in the Woods. and no Cab lowers the CG. Thanks Mike M.
Great lesson about buying your first tractor. I was in the same boat as you and looked at John Deere 2, 3 and 4 series tractors. After much research and debate I went with the 4066R and I've never looked back. However, my first level of criteria was definitely a cab. At my "advanced age" there's no way I'm breathing all that crap or getting stung by the various insects that we have here in Tennessee. One question, how is the headroom for a guy that's 6' 5" five lol. (There you go Kyle)
deep south homestead the TYM T494 is 2800 loader lift and with rimgaurd and box blade is 7000lb i had yanmar sa324 kioti nx4510 and now TYM T494 all were fantastic
Congrats on the new unit! Great work on your partnership, well deserved. Looking forward to seeing how it works. I have an Original Tractor Cab on a 1025R now, which works great for me. We are considering a move to a larger property, but until then I'm living vicariously through you!
When I was about 18 I was working on a big ranch in my area. One summer I was mowing all the pastures and stirred up 25 bumble bee nest. Luckily I was only stung once.
I'm buying next summer. I had really thought about the smaller, your old size, tractor. Been really reconsidering for the exact same reasons you mentioned. However, in the Texas heat a cab is a must at my age.
Hi Adam...great choice in a tractor!! I've owned my LS 35 HP tractor now for 5 years and I still love it. I bought it originally for my 60 acre property in North East Texas. But I ended up selling it. I now have it on my 2 acre home property which ot works well on. Going to be moving to Wisconsin here in a year so it will be put back to more use. It's a open station tractor and you were right wishing I would have gotten a cab tractor maybe in the future tho.
Welcome to the Home of the Cheese heads, Packers, Brewers, Bucks, ETC. HAHAAHAAH Where abouts are you moving to ? I'm in Central Wi by the Merrill, Wausau area. Make sure Your Truck has a good DEER bumper LOL... Mike M.
Hi from Russia! I’ve been watching your UA-cam channel about months and enjoy everyone video) I really like making firewood, splitting wood and of course ATV too Watch your videos and improve my English skills Good luck, man!) I hope in some time I’ll return from Moscow to my village in granny’s home and will make and split wood )
Great video- When I researched tractors- I ended up buying a Bobcat CT 5558 cabbed tractor and my dealer support has been excellent. I couldn’t be happier with the CT5558.
I purchased one like this but the 45hp before C19, but got mine with aux. lines to loader with a 4-in-1 bucket and grapple, also got the largest backhoe LS builds. I priced a Kubota with the same set-up, cab, 4x4, HST, aux. to loader, bucket, grapple and backhoe, it was within $8,000 of being double the cost of the LS, still have the written estimate. Then after seeing a video on attaching and removing the backhoe on the Kubota, I am so glad I didn't get it. It required tools and removing the lift arms to connect the backhoe. My LS requires nothing but a few minutes. I can disconnect it in 5 minutes and reconnect it in about 10 minutes. I have not had any issues with the LS, would replace it with another LS if I wanted a new tractor.
That’s the tractor I have. I love my machine. Also tell LS to change the lights. They stink. I’d pay more so I can have actual light. I had to get light bars
It’s nice to see a tractor equipped with rear remotes. Quite costly to have put on. Had to have these installed on my Kubota L3560. Nice looking machine. Dave
I appreciate the honesty and common sense. I’ve learned a few things from your videos thank you! I’ll probably check out your other channel also. Good luck!
Good morning Adam, the Live/Learn/Share aspect of U Tube and your excellent dialogue will profile everyone involved in this Venture. I’ve always enjoy listening to your dialogue which is a big positive aspect of your channel making it enjoyable and entertaining. 😀👍👍👍
Good luck with the new tractor. Maybe a year or so ago I posed a question to you. I asked if you were happy with the Kioti and what you would do differently. Your response was that you would go bigger. Good things come to those who wait. Happy to see you are in partnership with LS. May it last a long time.
Hi. Nice tractor. I have owned a MT468C for just over a year now.(Also from SLI) Watch the grease zerks on that loader. Just about all of mine broke. I also couldn’t use a LockNLube because it was too big to fit into the recessed holes on the loader. Upgrade those cab lights to LED. It was the first thing I did. The cab limits what you can do in the woods. I found that out pretty quickly. If you ever want to check out the 4 series I’m in Conneaut Lake.
Great video Adam. I have never heard of LS Tractor as well and I live in Franklin. I am definitely interested in watching and hearing what your opinion is on them. At this moment I have no use for a tractor that size. However within the next year or two I plan on buying some land,at least 10 acres hopefully more. Thank you for the initial introduction to LS Tractor. Have a good one,take care and God Bless!!!❤😊
I bought a LS357 shuttle shift cab tractor. Still waiting for it because they had to order my backhoe attachment. I bout a tree saw for it to. I am excited to try it.
Adam I used to own an LS XR4046 with cab and loved that thing. Bush hogging was a dream. One thing I did to mine was replace the work lights on the corners of the cab with LED's and it made a huge difference. One thing to watch for: mine would jump into neutral and start freewheeling when going slow downhill. I assume it was probably a linkage that needed adjustment. I'd still have mine if I hadn't needed something smaller and more nimble for working inside a barn. Next time Doug or Kyle ask "who", just tell them the company that builds New Holland Boomers.
I haven't really been keeping track but it seems like there are suddenly several new tractor brands being sold in the US. Hopefully the LS comes with better service than the one my cousin bought. The shop had his for 17 weeks and couldn't figure out how to fix it. It won't back up. They can switch some wires and make it so it backs up but won't go forward but they can't get it to do both. I think his is a Kioti.
I am in favour of buying as small & cheap as reasonable for a first time buy, regardless if it a tractor, boat, mobile phone, whatever. It is only after you have had experience with the thing that you know what you need, what is important, and what is not. And that is what you base your next buy on.
Congratulations on your new tractor. I'm sure that you'll enjoy the creature comforts of the cab and find the additional lifting capacity to be very useful.
I think that is a size bigger than a JD series 3 i bought 2 years ago- maybe in between your two. You’re right about going a bit bigger- i did and basically got about the biggest i could afford. I am really happy with mine, the only negative so far is the location of the fuel tank.
![[UA] NAVI проти G2 Esports | Blast Premier Fall Final](http://i.ytimg.com/vi/QWlIm4FGESQ/mqdefault.jpg)
We couldn't be more excited for this partnership and to see everything you do with the new LS!
Thank you, I’m excited too!
Need to work on the loader ergonomics.
I’m not sure if it’s just our dealer by me but the customer services isn’t great. Again could just be the dealer
LS = best bang for the buck
The dealer "WILL" make or brake a relationship. Can't tell you how much I hate my Kioti CK3510SE and largely due to Manchester Motors in Manchester Maine. Just a horrible dealership model. LS, treat this guy like he's family.
Beautiful setup! DJ did a great job presenting, and was very close on his guess for added weight with our Beet Juice Tire Ballast. The 17.5-24 rear tires on the LS 357 require 62 gallons for a 75% recommended fill. At 10.7 pounds per gallon that adds over 1,300 pounds of out-of-sight ballast. If any viewers are interested in how much weight Rim Guard can add to their unit, our website has a Tire Fill Tool with over 2,200 tire sizes that should be able to help you.
Awesome. Thank you for the exact numbers!
Gallons ?, pounds per gallon ? I'm glad that we changed to standard Systeme Internationale metric units in 1973. I was in Intermediate/Junior High then, so can mostly get by in either system, but certainly it was far easier using Metric for Maths calculations in High School and Trade Technical college classes. One litre (or water) weighs one kilogramme, and put 1,000 of them together and you have a Metric Ton (or Tonne), which would occupy a space of a cube, one metre long along each side. I do still think of a car's fuel consumption in miles-per-gallon. I calculate all the litres I buy and kilometres I drive then convert it back at the end. If the car is only doing 20 mpg, then I need to check it for problems. If it's between 30 and 40 mpg, then things are going well. (That is of course, Miles Per Imperial Gallon. LOL, silly Yanks, they even get their gallons and quarts wrong, LOL smiley face !)
@@KiwiCatherineJemma Interesting! There is definitely logic behind the metric system that seems to make good sense. It's all about what your exposed to! We purchase milk, fuel, and other things in gallons which makes it easy to visualize / compare. A gallon of milk weighs 8.6 pounds and RG is 20% heavier at 10.7 pounds per gal for reference.
@@RimGuardBallast Yep, we used Imperial measures here, including 240 pennies making 20 shillings which make One NZ Pound currency (originally based off old British Pounds). But changed to decimal currency, dollars and cents, in 1967.
As I said, weights and measures, including gallons, pints and quarts, inches, feet and yards, changed over about 1973 from memory. And the TV weather report changed from Fahrenheit to Celsius (with just a month of so of showing both units).
People especially my generation and older, still often use old measures in words of explanation. ("I'm on Empty, I must bung a few gallons in the tank, before the weekend. I have to go and pick up some Four-by-Twos at the timber place on the way").
So yeah, now we are in the 97% of the World's population using the standardised S.I. Metric System. Only the US along with Burma and few places else are still in the 3% using the old British Imperial, or another old non-standard system of weights and measures.
Some places still retain some old non standard units for historical reasons. The Japanese still use their old archaic measure for alcoholic drinks. I'm told.
Glad to see you have a safer tractor; weight makes a BIG difference!!!
Some people think LG is a off shoot of New Holland. But the truth be known New Holland and Case International are paired up. LS tractors are a subsidiary of the LG Corporation. Also LS makes tractors for New HOLLAND under a 100hp?!?!? I know in LS start up they had considerable amount of electronic issues; I will be following your adventure with LS.
What I have found through the years of being a CAT&CUMMINGS knuckle buster is that ground connections are critical to sensors!!!
The best example that comes to mind is my single mom niece who bought a used riding mower (CHEAP) and was told it needed a battery!?!
I checked it out and the battery appeared to be good; the problem was where the ground cable was bolted to the frame! Cleaned the connections and applied a little Never Seize and walla problem SOLVED!!! I have a ANTIQUE riding mower and the current battery is somewhere in the age of at least five years old and it's a Walmart battery which most say they are a one year battery??? Grounding is very important as is PREVENTIVE MAINTENANCE!!!!!!!!!!!!
DJ from Sandy Lake Implements did a very nice job for the LS company. It’s so important to have a dealer that is knowledgeable, reliable and helpful.
This looks like a great partnership.
“Machine”😂😂
Is there a clause in the contract that states if neighbor Doug is allowed to try out the new blue ox??
Anytime!
I bought a 41hp open station LS in 2013, 800 hrs on it now. It's been a great machine and done everything I needed it to. I really love the big front tires. My only regret is not getting a cab tractor!
Time to upgrade! Haha
First, you said “machine” alot. Just remember, thats my thing. Thats a nice tractor, perfect fit for your needs and for being 6’5”. Looking forward to seeing what it can do. Also, props to DJ. He is a natural on camera and did a great job explaining.
Yeah the 35hp frame is more for guys in that 5’6” 170lbs range. Dude you’re perfect
^^^^^This guy not knowing about LS tractors? What's that all about? ha I guess Adam just told the wrong guys about his partnership first :)
Thanks to people like you, I went up to the next size tractor and got myself a TYM T574HC. We've got a 16 acre farm, and 54 chickens and a couple of pigs, and about 1/2 the land is in woods. We cut firewood for heating so we got loaded tires and a 3rd function valve as well. Picked up grapples, 48" forks, a 66" leveling box (we have a 1200' gravel driveway) and the bucket it came with. Our tractor is much like the one you just got. We've only got 12 hrs on it = got it last Thursday, and love. Hope you enjoy yours as much as we're enjoying ours.
We are looking at the TYM 754 we will have 60 acres pastures, lumber and hay field!
I’d give a hard look at Kioti if you’ve got dealer support in the area. I love my DK5310SE, it’s a 50HP hydrostatic machine and it’s been incredible useful on my 20 acres
@@ecossearthur I’ve got a TYM T654 Power Shuttle on 20 acres. Such a nice tractor! Make sure you have a good dealer before you buy…do your homework. There’s a couple of good TYM owner groups on Facebook with people that will help answer any questions you have.
We also have the TYM T574HC. Great tractor! Now have a little over 100 hours on it. Previously had the T494C shuttle shift.
Sandy Lake Implement! Love seeing people close to me.
Been loving your channel for years. Congrats from Mercer.
Awesome! Thank you!
Years ago I had Two Agco MasseyFergesons built by LS. Great Tractors that I used hard for 27 years Custom Farming. My next one will be a LS for sure. Thanks
I kind-a did the same thing .... almost. I did do-diligence and looked through many ... many brands. Also thought I'd need 50-60 HP. Checked out a few dealers. Kind-a settled on the Kioti brand. Went to the closest dealer 52 miles away. Just gave the dealer a list of things I thought I'd be using the tractor for. He indicated that the RX 7320 would do all I needed. Well .... that was not in my price range and I thought that much more power was unnecessary. BUT .... the dealer asked me what "Tim-the-Tool-man Taylor" would say .... MORE POWER!!!. I tried the RX73 model, then the NX55. Yes ... there was a difference. But, still, I was racking my brain on making a decision. Don't you hate it when going through all the turmoil on those "IMPORTANT" decisions! Ended up get the RX 73. Now 3 years later and 400 hrs of operation ....... I DID make the RIGHT choice!! And ... have NEVER looked back on thinking 'Maybe I should've". Just remember ..... "MORE POWER"!!!! Oh ... ho ... ho ....
Adam you hit the nail on the head with this video and should be a must watch for people buying their first tractor without having any experience operating one. So many people go out and buy a compact or subcompact tractor thinking that it will able to do all the tasks on their property and once they start using it they suddenly realize that they bought a tractor that is to small and it lacks the horsepower to get the job done. Years ago a friend gave me some great advice when I was going to buy my first tractor and he said , “ big tractors can do small jobs, but small tractors cannot do big jobs.” Great video and take care.
Well said
I didn’t realize LS made tractors that size?? Good to know, just needs a third SCV on the loader and hydraulic top and tilt kit and good to go in my book
When I retired and bought a 20 acre place I had zero tractor experience. The local dealer sold me a JD 1025R and all the implements. It's a really great and reliable machine but I wish he'd have talked me in to a bigger model. This little guy has been able to do everything I need but it just takes me a little longer than a bigger machine.
The LS company sounds like a great one! You did a great job of comparing the two tractors without any negative comments on either one! Great job, Adam!! I hope you can get LS a lot of business & they can help you own this tractor. I think we'll need a few extra videos to see all the things it'll do!! 🤔😉👍God bless you and your family!! I hope y'all have a blessed Christmas season! Thank God for His gift of Jesus to us!! ❤️ 👍
Nice tractor, Adam! It should serve you well. Thanks for being upfront regarding your arrangement with LS. You're always a straight shooter, no BS kind of guy so your opinions and suggestions are helpful to me. The snow blower is a nice addition and also provides the benefit of some additional rear ballast. Look forward to seeing it in action!
Haha loving the pond update not pond updates you have been doing lately. Starting to definitely look a lot fuller
Congratulations on the tractor upgrade Adam. As an LS owner myself I am excited to see you on an LS and to here your honest opinion and experiences with an LS tractor.
Had a friend buy a ls from sandy lake implement a few years ago. He loves it! I idles a little to high, but other than that it’s a solid machine
As Kyle from Spicer Design has repeatedly reminded us of your height…..I feel that the new LS fits your size better. I am the same height as you and am aware that we sometimes look like we are the adult riding the kids go cart. When people ask my height I tell them I’m 5’ 17 1/2”! Make them do the math, Lol! Feel free to use it yourself! Will be interesting to hear your feedback on the new addition to your property! Nice video once again!
Looking forward to see how this tractor performs. The color caught me off guard. The color does not matter as long as it performs and holds up over time. Your channel will be good for LS brand awareness . Competition is always good, it makes companies make better products and address issues.
Nice! Finally, a UA-camr that's not bought by corporations. It's hard to find a UA-cam channel these days that's not bought. They always try to push products; most don't tell you the pros and cons of products or they really try to talk it up.
Thank You, seriously, for not being bought.
I just found your channel and now I'm a subscriber 🙂
Before I moved to the acreage, I bought an old Ford 3000 gas open station. One winter of pushing snow on a half mile driveway got old real fast. After my house in the city sold, I went to the local Massey dealer. Sat in a 1742 cab tractor and said yup, this one's for me. Never started or drove it. It just fit.
Wow that is awesome Adam.
In 2007 I was ready to buy a tractor and had allergies really bad so that made the cab decision for me. Never once have I regretted the cab! Warm and dry in the cold and nice and cool and clean when it’s hot and dry. I have a Kubota L3940 cab and it is my best piece of equipment.
Someday I hope to build my channel and have some kind of partnership with an equipment company . Really enjoy your videos and look forward to seeing what you do with the tractor.
Yeah!! You will love that LS! I’m a LS owner myself. Congratulations pal. Great video!
LS tractors are great, I'm on my 2nd one, my current tractor is 2018 40hp with backhoe, bought brand new, been awesome
I’ve been watching your series on your new storage building. I have to admit that this video sold me on subscribing to your channel. Hearing someone honestly admit to having tractors given to them is refreshing. Sometimes people forget that much of what they see is sponsorship advertising and the UA-camrs don’t have to actually spend hard earned money on the product they are showing. Pushing products because they pay you makes someone a sellout. You sir are not one of them. Please never lose sight of that like some others have unfortunately done on UA-cam.
CONGRATULATIONS! My first tractor was a Kubota L2501 HST. That model doesn't have a single "bell or whistle," but I learned about tractors w/it, and from that decided what I wanted / needed.
I then bought a cabbed MT3-57, but mine is a power shuttle vice an HST. I wanted a "stick shift" rather than the HST, because you get a pinch more power and I just prefer a "stick" over an "automatic." The only thing I don't like about it is that the room in the cab is a bit tight. Truthfully, it's okay when I'm just driving / working, but when I need to move around in the cab, it's tight.
I FINALLY figured out where I could put a toolbox, and I'm VERY HAPPY w/the location and ease of installation and use. I can send you some pics w/written descriptions if you like, but it does NOT require ANY modification to the tractor. If you look @ the FEL boom on the right side of the tractor, you'll see a single 5/8" hole @ the back of the boom (cab end of boom). I used a piece of 4" x 1/4" angle iron that was about 12" long for a "shelf." On one end I drilled a 5/8" hole through the vertical part, and put a short 5/8" bolt w/washer (as a spacer) through it and that hole on the back of the FEL boom. The angle iron is held in place by the bolt on 1 end and it rests on top of a grease fitting "shroud" on the other end. It can't come off that grease fitting "shroud," and it doesn't hamper the function of the loader or anything else. I also took a "standard" ammo can and drilled a 5/8" hole through it on 1 side near the bottom, on the end closest to the lid hinge. It rests on the angle iron "shelf," and is held in place by the same 5/8" bolt.
I don't have to move the box to get to the grease fitting to grease it. When I open the box, the lid opens toward the rear of the tractor and just misses the running light (you could of course mount the box 180 degrees the other way, so that it opened toward the front). It's worked great for over 2 years, and again, if I took it off the tractor, you'd never know it had ever been there!
I watch your channel, and I'm sure that tractor will serve you well; again, congratulations! : )
Kinda sad to see the Kioti leave. It was what brought me to your channel 4 years ago when I was searching for my first tractor. I ended up with a CK3510SE and I couldn't be happier. One size up would help feel a little more stable when moving full totes of firewood, so I totally understand the upgrade. I gotta disagree with getting a cab. As a desk jockey, when I'm outside, I want to be outside. Hope the LS treats you well.
Have heard Mike Morgan, Outdoors with the Morgans, repeatedly discuss "what's the best brand" and his advice was to find a dealer network that has great support & service.
I always hated your old tractor and as a man, I’m proud you stepped it up!!!
lol
Adam. Sunday morning viewer here. I've written this b4, when I watched your first tractor comparison vid with the charts and evaluation ~ that was a great confirmation for me buying my first "used" tractor (unseen) and off MKTplace. I find value in the CPA analysis you do. Now my Case D-25 is working great and I am learning how to operate it, improving on my skills. That said the size and turning radius is what I needed for my 5 acres lot with the two small woodyards. This LS partnership is perfect for your 15 acres of fields and 30 acres of woods. I look forward to learning more about the LS 57 hp tractor and what it can do. Keith
Thanks Keith! Congrats on your first tractor
GOOOOOD
MAAAAAAAAWNIN EVERYONE!!…
Congrats on the sponsorship/partnership with LS.
You’re a stand up guy so
Im
Sure your honesty on the reviews will be factual.
Thanks for sharing.
Have a Day!😊
Adam
Have watched you grow into your land, your machines and love for it all for quite some time.
You will find the link peddle handy. When moving fork loads from here to there. Just moving the machine back and forth around the yard. Even when roading the tractor, just like a car or truck with a throttle peddle it has its application.
I find when loading, digging, or lifting large loads with the front, mowing, it's better to Disengage the link and use a constant rpm. This allows you to push into a pile and lift at a higher rpm power( hydraulic rate)
Also, not sure about how the tractor initiates it's Regen. Operating at lower rpms, idle, tends to place the unit into Regen a bit more. Not a problem, that's what it's there for but keep in mind when using the link a lot. Also there is a lifespan to a dpf before it needs cleaning or replacement. Quite a long life though.
When you do use the link peddle try setting the throttle lever above idol. My sweet spot is around 1100 rpm. This allows for cleaner starts ( moving forward or backward) from a static position without some lag that would exist at a low rpm or just idol setting.
It is a handy feature and I'm glad I have it on my unit. Kioti DK4710cab.
Oh, good move with the cab! You won't regret at all.
John
Columbus NJ
Hey John, I have already fallen in love with the link pedal. And you are right for just driving around it’s great but for doing loader work using the tradition throttle lever is best. Took me all of about an hour to figure all that out haha
@@HometownAcres perfect!
Also I did put a radio with Bluetooth in my cab. At first I thought may be overkill but now when mowing, or loading or whatever for an extended period it's nice to have some music going, and for phone calls.
I also use Midland Gmrs two way radios on the property, way easier then texting or calling back and forth when working with others or even when my wife is trying to find me.. lol. I put a mobil unit in the cab. You would even be able to talk to Your neighbor Doug.
Anyway best wishes, Happy Holidays!
John
I own a MT340 cab and love it for the ease of working the property. The cab is the only way to go!
Nice new ride, we did the same thing here at the Cay. Went from a BX to an LX with a cab. Enjoy Adam. 🌴🚜👍🇨🇦
Congrats Adam! Glad that things came together so quickly! Enjoy The New Tractor, Jared.
Thanks buddy
I bought an LS XU6168 back in 2019 and I absolutely love it. It’s 65 hp to the pto and has a cab. It is small enough to do small jobs and it is certainly big enough to run my 12’ batwing mower. You should love it !
New viewer and subscriber here, excited to follow along. I sat on an LS at my local fair this year and i must say, when my wife and i finally purchase a homestead and we need a tractor, LS is deff on my consideration list
I started with a 70 hp tractor. I did have some experience on a neighbor's 35 hp tractor. It has been almost perfect for my projects but I am now at the point I no longer need this large a tractor. A smaller tractor is something that will suit me better going forward. I am sure there might be a time in the future when the bigger tractor would be better, but to be honest I really won't NEED a tractor but appreciate the usefulness of one.
I think the LS is going to be a good tractor for you and your needs.
Thank you!
I am glad you are able to be open and honest about the review. Sometimes, companies don't want negative feedback. I want to know the good, the bad, and the ugly. Kudos to LS for not limiting your review. This tells me that they have confidence in their products. I look forward to seeing it in the future and what you think. Thanks for sharing your experience with this tractor and in the future.
I've heard great things about LS tractors, cant wait to see you using it on the channel!
I made the same mistake. Started with a 25hp open station. Within 2 years I traded up to a 50hp Massy Ferguson with cab. Carzy the difference in usability. You'll settle into this real quick. Happy for you.
Thank you!
I did the same thing. I bought a open station 40 hp tractor. I recently updated to a cab tractor and 60+ hp tractor. The bigger tractor can lift 1 ton. There are a few things like IBC totes full of wood and 1 ton fertilizer/seed bags that the bigger tractor can handle. Nice upgrade Adam!
Thank you. Congrats on your recent tractor upgrade
Grats on the partnership. Looks like a win, win situation. Looking forward to future videos with the LS.
More to come!
👍@@HometownAcres
I have a 357 cab tractor shuttle shift, and I absolutely love it. My only issues I have with the tractor is that the safety switch on the seat is very sensitive. Sometimes when I push the clutch in I stall the tractor because of the weight shift from pushing the clutch in another thing that I would change is the style of the loader bucket. It is hard to see when you’re doing loader work how much you actually are digging in other than that it’s been a great tractor very reliable and I would suggest when you order one get it with the third function on the front also add more lights to the top of the cab of the tractor so you can point them in the directions that is needed to clearly see around the whole tractor. When you have the bucket on the front. The headlights are pretty much useless. I do not have my tires filled but it is a very well balanced tractor.
When lifting heavy items near the top of your range, make sure you raise the rpms to almost max. Your hydraulics will get alot more power and you will be able to lift that machine higher if you want.
Thanks for the tip!
Congrats on the new tractor.
One bad part of going to a bigger machine, in now all of your implements are too small!
Cant wait to see you put it in action.
Bought my LS from SLI. Fantastic customer service!
Also, congrats on having the ability to get to use a tractor in this way. Consider it a blessing. Also, good on LS for allowing you to be honest. I love my LS. I have the MT225 for our 25 acres and so far it's done everything I've thrown at it and more. The reason I went with LS was because of Sandy Lake Implement. They were phenomenal to deal with and are known in our area for their service. Not to mention their a small locally owned and operated dealership. Looking forward on hearing your thoughts on it!
Open and transparent. Gotta love that this day and age. Can’t wait for all the new tractor videos.
3 point mounted snowblower???
Hope you have a very limber neck, a good neck massager, and a wife who is willing to use that massager on you.
After having operated a 3 point mounted snowblower for hundreds of hours, never again.
Good luck!!!
Great update.. never heard about LS tractor
With much loader work i would have recomended a paralell lifting loader..
Many thanks for sharing for experience. Very good and useful for all of us. Thanks again and enjoy the machine ! 💫
Can’t wait to see this in person! Also really looking forward to a 6 month or 1 year review after you’ve really put it through its paces. Congrats again to both you and LS!
Thanks for being completely transparent on the new tractor, hopefully other tractors channels are watching!!!
Please mention the fact that the loader frame goes all the way to rear axle unlike some other brands. I own a 101 hp LS tractor.
You are going to love this. I have a JD 4052R with the hydro and cab very similar in size.
Congradulations, you got yourself a Case/new Holland tractor, exact same thing
Korean built
Hit one of the hornet nests with 4 Morgan Horses pulling a plow and it is a wild time until you cut the leads to let them off the trees. Talk about doing strange designs in the field. My Dad did that as a young man plowing the field to plant corn. Wild time. New Hive.
I have a deep appreciation for the honest, straightforward, and truthful videos and reviews you do Adam. Honestly, it keeps me watching your videos. Down to earth and full of facts, rather failures or accomplishments you keep it real in a world that sugar coats most everything. Keep the great videos coming Adam. 👍🏻
Thank you. Glad that comes through on camera
I usually just open my back window when hooking up to three point attachments and reach in and adjust the height like that. Not a huge inconvenience. Most of the time I can back right up to the implements and hook up to the quick hitch and just reach out the back window and lock the quick hitch. Most non pto implements I can hook up without getting out of the seat.
Congratulations on the upgraded tractor Adam. I am sure that the increased lift capacity will come in handy when you're moving logs around. Stay safe, healthy and warm. Bill H from Cranberry Township
Gonna be interesting to follow this series Adam.
When I was shopping for a tractor I tried out the LS and I did not feel Comfortable. being tall as You but bigger built it did not fit well. ( You can see me in Jon's Built to last Video)
before My house fire I almost had the Ck3510 open station. But because I had to move some heavy stuff to My new place I went with the DK 4510 open station Shuttle shift. I did not want a cab in the Woods. and no Cab lowers the CG.
Thanks Mike M.
Definitely some good points. I wanna be able to lift tots of wood. I think the extra 3000 to go from sat ck to dk be well worth it.
That cab is going to be nice Adam.
I didn't get a cab on my excavator because it was $10K more, and a larger machine. Now I'm suffering.
Awesome Adam, I'm actually in the research phase of buying a tractor so it's great I get to see the LS product and what you do with it. Nice tractor!
Great lesson about buying your first tractor. I was in the same boat as you and looked at John Deere 2, 3 and 4 series tractors. After much research and debate I went with the 4066R and I've never looked back. However, my first level of criteria was definitely a cab. At my "advanced age" there's no way I'm breathing all that crap or getting stung by the various insects that we have here in Tennessee. One question, how is the headroom for a guy that's 6' 5" five lol. (There you go Kyle)
Haha he already told me I missed an opportunity to tell you guys I was 6’5
deep south homestead the TYM T494 is 2800 loader lift and with rimgaurd and box blade is 7000lb i had yanmar sa324 kioti nx4510 and now TYM T494 all were fantastic
Congrats on the new unit! Great work on your partnership, well deserved. Looking forward to seeing how it works. I have an Original Tractor Cab on a 1025R now, which works great for me. We are considering a move to a larger property, but until then I'm living vicariously through you!
Nice looking tractor. Can't wait to see how it works out for you.
Thanks for your transparency on the LS relationship. Congrats on being able to attract this type if partnership. Great accomplishment of the channel.
Thank you!
So glad you posted this because I've been looking into tractors for our farm and firewood business.
When I was about 18 I was working on a big ranch in my area. One summer I was mowing all the pastures and stirred up 25 bumble bee nest. Luckily I was only stung once.
I'm buying next summer. I had really thought about the smaller, your old size, tractor. Been really reconsidering for the exact same reasons you mentioned. However, in the Texas heat a cab is a must at my age.
Hi Adam...great choice in a tractor!! I've owned my LS 35 HP tractor now for 5 years and I still love it. I bought it originally for my 60 acre property in North East Texas. But I ended up selling it. I now have it on my 2 acre home property which ot works well on. Going to be moving to Wisconsin here in a year so it will be put back to more use. It's a open station tractor and you were right wishing I would have gotten a cab tractor maybe in the future tho.
Welcome to the Home of the Cheese heads, Packers, Brewers, Bucks, ETC. HAHAAHAAH
Where abouts are you moving to ? I'm in Central Wi by the Merrill, Wausau area.
Make sure Your Truck has a good DEER bumper LOL...
Mike M.
You’re gonna love that cab!! I just picked up my Yanmar YT359C yesterday evening, and got to put it use a little bit today. It’s an awesome machine!!
Hi from Russia!
I’ve been watching your UA-cam channel about months and enjoy everyone video)
I really like making firewood, splitting wood and of course ATV too
Watch your videos and improve my English skills
Good luck, man!)
I hope in some time I’ll return from Moscow to my village in granny’s home and will make and split wood )
Thank you. Your written English is very good
Hey Adam, congratulations on your new partnership I am sure it will be a good one for both parties.
I hope so!
Great video- When I researched tractors- I ended up buying a Bobcat CT 5558 cabbed tractor and my dealer support has been excellent. I couldn’t be happier with the CT5558.
My yard is barely bug enough for a lawn mower but I'm here for the ride let's go! Let's hope for some good snow
Yeah buddy! Glad to see you rocking the blue! 👍💪🔥
Really exciting times
It would be interesting to hear a price comparison with all others in that size.
I purchased one like this but the 45hp before C19, but got mine with aux. lines to loader with a 4-in-1 bucket and grapple, also got the largest backhoe LS builds.
I priced a Kubota with the same set-up, cab, 4x4, HST, aux. to loader, bucket, grapple and backhoe, it was within $8,000 of being double the cost of the LS, still have the written estimate.
Then after seeing a video on attaching and removing the backhoe on the Kubota, I am so glad I didn't get it. It required tools and removing the lift arms to connect the backhoe. My LS requires nothing but a few minutes. I can disconnect it in 5 minutes and reconnect it in about 10 minutes.
I have not had any issues with the LS, would replace it with another LS if I wanted a new tractor.
You will love it. I went with a DK5310 HST as a first machine and it is impressive for the size.
That’s the tractor I have. I love my machine. Also tell LS to change the lights. They stink. I’d pay more so I can have actual light. I had to get light bars
It’s nice to see a tractor equipped with rear remotes. Quite costly to have put on. Had to have these installed on my Kubota L3560. Nice looking machine.
Dave
Thanks Dave. And yes that’s the name of the game with LS they make a lot of features standard
I appreciate the honesty and common sense. I’ve learned a few things from your videos thank you! I’ll probably check out your other channel also. Good luck!
Good morning Adam, the Live/Learn/Share aspect of U Tube and your excellent dialogue will profile everyone involved in this Venture. I’ve always enjoy listening to your dialogue which is a big positive aspect of your channel making it enjoyable and entertaining. 😀👍👍👍
Thank you very much, happy to know it’s received well
Good luck with the new tractor. Maybe a year or so ago I posed a question to you. I asked if you were happy with the Kioti and what you would do differently. Your response was that you would go bigger. Good things come to those who wait. Happy to see you are in partnership with LS. May it last a long time.
I mean the 35hp did 90% of what I needed it to but that 10% of what it wouldn’t do was starting to grow
Congratulations. Looks sweet! Can’t wait to see you use it.
Hi. Nice tractor. I have owned a MT468C for just over a year now.(Also from SLI) Watch the grease zerks on that loader. Just about all of mine broke. I also couldn’t use a LockNLube because it was too big to fit into the recessed holes on the loader. Upgrade those cab lights to LED. It was the first thing I did. The cab limits what you can do in the woods. I found that out pretty quickly. If you ever want to check out the 4 series I’m in Conneaut Lake.
Yeah I was going to point that out about the cab lights in a future video. And I might take you up on that
Great video Adam. I have never heard of LS Tractor as well and I live in Franklin. I am definitely interested in watching and hearing what your opinion is on them. At this moment I have no use for a tractor that size. However within the next year or two I plan on buying some land,at least 10 acres hopefully more. Thank you for the initial introduction to LS Tractor. Have a good one,take care and God Bless!!!❤😊
Not in the market for any tractor but I will say, you did a great job presenting it.
See ya on the next project.
Wow, thanks!
I bought a LS357 shuttle shift cab tractor. Still waiting for it because they had to order my backhoe attachment. I bout a tree saw for it to. I am excited to try it.
Adam I used to own an LS XR4046 with cab and loved that thing. Bush hogging was a dream. One thing I did to mine was replace the work lights on the corners of the cab with LED's and it made a huge difference. One thing to watch for: mine would jump into neutral and start freewheeling when going slow downhill. I assume it was probably a linkage that needed adjustment. I'd still have mine if I hadn't needed something smaller and more nimble for working inside a barn.
Next time Doug or Kyle ask "who", just tell them the company that builds New Holland Boomers.
My Kioti has done that a few times recently. It seems to slip out of gear and into neutral. Not very often but occasionally.
I haven't really been keeping track but it seems like there are suddenly several new tractor brands being sold in the US. Hopefully the LS comes with better service than the one my cousin bought. The shop had his for 17 weeks and couldn't figure out how to fix it. It won't back up. They can switch some wires and make it so it backs up but won't go forward but they can't get it to do both. I think his is a Kioti.
I am in favour of buying as small & cheap as reasonable for a first time buy, regardless if it a tractor, boat, mobile phone, whatever.
It is only after you have had experience with the thing that you know what you need, what is important, and what is not. And that is what you base your next buy on.
That's awesome! I almost bought a LS. But ended up buying an RK. Wich i like. I think anymore they are all about the same.
Congratulations on your new tractor. I'm sure that you'll enjoy the creature comforts of the cab and find the additional lifting capacity to be very useful.
Good luck with the new rig
I think that is a size bigger than a JD series 3 i bought 2 years ago- maybe in between your two. You’re right about going a bit bigger- i did and basically got about the biggest i could afford. I am really happy with mine, the only negative so far is the location of the fuel tank.