Harbor Freight Titanium Plasma Cutter Complete Review and Demonstration
Вставка
- Опубліковано 10 чер 2022
- Unboxing, setup, and demonstration of the Harbor Freight Titanium 45A Plasma Cutter. I demonstrate cutting 12 gauge steel, 3/16 inch steel, 1/4 inch, and 1/2 inch.
Follow me on Instagram:
steel_forest_welding_and_forge
Follow me on Facebook: / analogmike1
Please Subscribe:
/ @steelforestweldingand...
#weld #welder #welding #mig #gmaw #aircompressor #harborfreight #vulcanwelder #vulcan #titanium #garageshop #smallshop #smallbuisness #bluecollar #metalworking #metalfabrication #diy #make #maker #dirtyhandscleanmoney #workhardstayhumble #tool #tools #evolutionsaw #countryboy #unboxing #review #demonstration #setup #plasmacutter - Навчання та стиль
Thank you for the demo. You answered all the questions I had about this unit.
That's what I'm here for. Happy to help.
Thanks, awesome demo.
You're welcome! Thank you for watching and commenting.
I just bought mine today. First plasma cutter I've ever owned, haven't used a plasma cutter since high school in the early 2000!! I made a few cuts with this thing and was pretty impressed with how clean it cuts, though my technique could use lots of improvement!
My air compressor is a 30 gal 5.2 SCFM @ 90 PSI. Not much bigger than yours. So far, no issues. I did buy a water/oil filter and air dryer combo, also from Harbor Freight, to help make sure the air is conditioned better before feeding it into the plasma cutter. I think that was a good decision as before, I could see the moisture spraying out of the hose when blowing air with a blow gun.
You know I think I'm gonna take a second look at getting an inline dryer myself. Thank you for the insight.
I just watched 5 videos on this machine. By far the best video. If you are not an instructor you easily could be 2👍
Wow, thank you!
I just scored on of these units at a flea market yesterday for $120 bucks. It didn’t come with any of the accessories, didn’t even have the torch or the ground, just the unit all by itself. But ordered the torch for $150 from HF with free shipping. So, less than $300 for everything i need, i feel like i scored pretty good after seeing this vid. Thanks!
heck yeah you did! you made out like a bandit!
Great review and testing! Thanks
Thank you. I'm glad you enjoyed the video.
Great review, even the safety bit at the end.
Thank you!
Good video and informative! 👏👏
Thank you very much. Glad you liked it
Nice video!
Thx bro!🐈⬛
First time Welder and cutter so can you use a better cutter head for this (Bigger Electrode) ? If so can you research and list them. Nice Video for me to understand better what I'm doing, especially the safety, and preventive tips.
I'm glad you got a lot out of this video! Please ask any questions you may have going forward. That's what this channel is all about. As for your question, no. These tools are designed specifically with the consumables(electrode and tip) built by the manufacturer. I would recommend using those exclusively to prevent possible damage to your machine.
There pretty good for the price
agreed, I was very surprised and happy with it.
Nice set at min 3:06
thank you
SCFM measures the value at “ideal” temperature and pressure conditions, while CFM measures the “actual” air flow rate.
Thank you for the clarification.
Will i need to use a 45 amp breaker or can i use my 30 amp breaker with the 240v?
Good question! Unfortunately I am one hundred percent not qualified to answer that. I can tell you that I had my breaker box and power input upgraded to 220V and have two dedicated circuits for my buisness. One 220v plug and one 110v. You can find all of the user manuals to harbor freights tools on their app and website. I would check that.
What you say is it compatible with single phase 220 volts and how much is whole thing please. ??
Yes compatible with 220 and 110. Do you mean price for the entire setup including compressor and hosing?
How can i cut close to an inside 90 degree angle with that u-shaped tip guard on there? Seems like it would block me from getting right up against the 90 degree angle?
Good queation. The guard is removable. You can also pull back your torch from the work piece a little as well.
Does it have gouging Mode too?
No, this model does not have a gouging mode setting. Nor can I find gouging consumables.
Have you used fine cut consumables with this machine for finer cuts?
To be honest this is the first time I have heard of fine cut consumables. I'll have to look into them.
So pissed its so expensive! I love my titanium 125 welder but this is just too damn pricey
I also have a review of the Bestarc Gen 7 plasma cutter. It's not available for purchase yet. But it gives good credence to the bestarc brand. They are much cheaper than the titanium brand.