Thank you very much, it is much appreciated. Hopefully I will be able to get back to making vlogs very soon. Just waiting to be able to afford to get a tow bar and a trailer on my car or a furnace. When I get some time I will pop over and check out your channel also.
Thanks for the shout out mate keep up the good work! one man's junk is another man's treasure! Nice knowing that the microwave is fully safe to work on too! Maybe acetone (nail polish remover) will solve or literally dissolve the sticky problem?
Hi mate, thank you for the advice, it’s nice to know that there are people viewing that care about my safety. That’s not a bad shout with the nail polish remover, I will give that go at some point.
Thanks Chief much appreciated, hopefully I will have some of my own panning videos for you to watch in the near future. Also will be making some cool silver moulds at some point when I can afford a devil forge so will be vloging that as well and hopefully will be able to send you something cool.
Hey mate, yes it’s been a while. I am planning on coming back, but it’s so difficult at the moment with money. My savings don’t seem to be going up and with the price of everything rising makes it so much harder to save anything. Hope you are well.
Thanks for coming over to my channel. Are you not from UK original then? Your accent sounds very English. You should defo do some melting videos as well. That is what I plan on doing, keep doing my scrap videos but also do some melting and some detecting videos as well. But instead of having 3 different channels have 1 channel with 3 play list. I’m not sure why people have different channels because then you have to start your subscriber count each time.
Hey came here from your comment. Great video 👍. You definitely need a furnace to start melting your scrap. I would just melt that glue off that copper wire 😁
Hey thanks for coming over, glad you liked the video. 100% going to get a furnace at some point and do some melting and casting projects. Thanks for the advice on the glue, what would be the best method of melting it off?
Hey Darkstar, I am trying to still scrap but I have no van at the moment so just trying to save up to get a decent 1 but it’s taking longer than I hoped to save up. As soon as I get 1 I will be straight back out there making videos. Hope you are keeping well.
Thank you I appreciate that, I’m also planning on starting sand casting as soon as I can afford a forge. I have many ideas of lovely designs I am planning on making Nordic gold. I’m also so going to start scrapping more electronics for the silver content to make things from as well.
Appreciate that, I haven’t put any videos on for a while since my van died. But am planning on doing some micro scrapping so shouldn’t need a van for that
👍🏻 thanks Unicorn much appreciated, will be doing melts and sand casting videos soon. As soon as I can afford a devil forge. I have all my metals ready, nice piles of brass, copper and aluminium and just started saving up my silver contacts so will hopefully have a nice pile of that soon as well.
@@ScrapRushUK I recommend watching 4nines Fine Silver's older videos to all new pour'ers. He's got a bunch of really great tips back there. Stuff like, safety- heat everything up, your tongs, the molds, sand how too's, etc. He poured my first silver unicorn. Posted a shorter video of it a ways back👍
@@silverunicorn2645 yes I have a list of channels I need to look at and got added a few to the list from your stickers collection. Much appreciated for that advice will defo take a look at his videos when I’m next off work.
Hey Alex, I know I still don’t have a van, or any money to buy 1. I’m trying to save but I’m todays climate it’s very difficult to have any extra cash to put aside. But as soon as I can I will be back to making content.
Thanks for sharing haveing a good catch up as been away for a few weeks 👍 will see you at the next 👍
Crushed the like button my friend! Thank you so much for sharing! Excellent video!
Thank you very much, it is much appreciated. Hopefully I will be able to get back to making vlogs very soon.
Just waiting to be able to afford to get a tow bar and a trailer on my car or a furnace.
When I get some time I will pop over and check out your channel also.
Nice little scrap run, scrap dog liked it too ! haha.
Thanks Cruiser, he does love a trip to the scrap yard. I just wish he was better at sniffing out copper and brass for me lol
@@ScrapRushUK Yeah Brownie loves road trips but he is no good at finding scrap either ! 😁😁😁
@@CruiserMac I think we need to trade them in for metal detectors lol
@@ScrapRushUK Probably cheaper ! 😁😁
Thanks for the shout out mate keep up the good work! one man's junk is another man's treasure!
Nice knowing that the microwave is fully safe to work on too!
Maybe acetone (nail polish remover) will solve or literally dissolve the sticky problem?
Hi mate, thank you for the advice, it’s nice to know that there are people viewing that care about my safety.
That’s not a bad shout with the nail polish remover, I will give that go at some point.
Great video mate , get back on the scrapping 😉👍
Great video brother, thanks for sharing 👍
Thank you for watching brother, glad you liked it.
Got ya added back. Good video
New subscriber !! Great to meet y’all
Thanks Chief much appreciated, hopefully I will have some of my own panning videos for you to watch in the near future.
Also will be making some cool silver moulds at some point when I can afford a devil forge so will be vloging that as well and hopefully will be able to send you something cool.
BIG THUMBS UP FANTASTIC VIDEO THANK YOU FOR MICRO SCRAPPING OF A MICROWAVE,SEE YOU NEXT TIME STAY SAFE TAKE CARE.
Thanks JKS much appreciated.
Great video
Thank you much appreciate, once I’ve sorted a trailer or a van out hopefully I can get back to making more content.
great video brother
great job ;)
Thank you brother appreciate that.
@@ScrapRushUK ;)
Long time no see,do you have a new vehicle has yet?and will you be coming back to you tube?hopefully see you soon again.
Hey mate, yes it’s been a while.
I am planning on coming back, but it’s so difficult at the moment with money.
My savings don’t seem to be going up and with the price of everything rising makes it so much harder to save anything.
Hope you are well.
Very cool. I used to run a car breakers in UK. I have a devil forge. I should do some melting and casting videos
Thanks for coming over to my channel.
Are you not from UK original then? Your accent sounds very English.
You should defo do some melting videos as well.
That is what I plan on doing, keep doing my scrap videos but also do some melting and some detecting videos as well.
But instead of having 3 different channels have 1 channel with 3 play list.
I’m not sure why people have different channels because then you have to start your subscriber count each time.
@@ScrapRushUK I think for some they hope to build multiple successful channels. I am from UK and often there but I travel a lot.
@@NathanielOutdoorAdventures I would love to travel was always a dream before having a family.
May 1 day when the kids have grow. Up and left home.
Hey came here from your comment. Great video 👍. You definitely need a furnace to start melting your scrap. I would just melt that glue off that copper wire 😁
Hey thanks for coming over, glad you liked the video. 100% going to get a furnace at some point and do some melting and casting projects.
Thanks for the advice on the glue, what would be the best method of melting it off?
@@ScrapRushUK I don't know if it would change that scrap price. I'm saying I'd throw it in my furnace 😉
New here. You are added!
No vids for a while, hope all is well with you, are you still scrapping?
Hey Darkstar, I am trying to still scrap but I have no van at the moment so just trying to save up to get a decent 1 but it’s taking longer than I hoped to save up.
As soon as I get 1 I will be straight back out there making videos.
Hope you are keeping well.
Hi there. I popped over to return the sub my new friend. The work the scrappers do is important in my eyes. Have a great weekend to come .
Thank you I appreciate that, I’m also planning on starting sand casting as soon as I can afford a forge. I have many ideas of lovely designs I am planning on making Nordic gold. I’m also so going to start scrapping more electronics for the silver content to make things from as well.
👍👍🌴
Great video my friend new subscriber here
Appreciate that, I haven’t put any videos on for a while since my van died. But am planning on doing some micro scrapping so shouldn’t need a van for that
Gotcha back fam. Have the best day 😃👍❤️🦄
👍🏻 thanks Unicorn much appreciated, will be doing melts and sand casting videos soon. As soon as I can afford a devil forge.
I have all my metals ready, nice piles of brass, copper and aluminium and just started saving up my silver contacts so will hopefully have a nice pile of that soon as well.
@@ScrapRushUK I recommend watching 4nines Fine Silver's older videos to all new pour'ers. He's got a bunch of really great tips back there. Stuff like, safety- heat everything up, your tongs, the molds, sand how too's, etc. He poured my first silver unicorn. Posted a shorter video of it a ways back👍
@@silverunicorn2645 yes I have a list of channels I need to look at and got added a few to the list from your stickers collection.
Much appreciated for that advice will defo take a look at his videos when I’m next off work.
Have you stopped making videos mate
Hi Chris, I have at the moment once my van broke I found it difficult to get back to. I’m planning on coming back soon though hopefully.
And good luck if you start metal detecting
Thanks you
Hay u ok long time with no videos
Hey Alex, I know I still don’t have a van, or any money to buy 1.
I’m trying to save but I’m todays climate it’s very difficult to have any extra cash to put aside.
But as soon as I can I will be back to making content.
@@ScrapRushUK totally agree can v extera earnings off set v price of a new/ second hand van if it was ro last like 3 years
To