I have seen a lot of people on UA-cam who opens the steam inlet valve to the heater before starting the purifier pump unlike you. Your way is the right way.
Sir good day. Thank you for the wonderful question, just read it today. PT1 stands for Pressure Transmitter no. 1 which detects the feed lube oil pressure. While PT4 is Pressure Transmitter no. 4 which detects the clean lube oil or discharge pressure both transmitter work on the same principle they send 4 - 20 mA signal going to the purifier EPC and translate it to a digital numbers which will give us pressure reading on display.
@@marinongmakinistangpilipin2927Good day sir,maybe you know that the reason, Durind Start no have PT4 -0,before its working with minimum pressure PT4 -0.9/1.0bar,but after i disamble/assemble ONLY the paring tube(Sep.Bowl not dissambled)and tray to start no more pressure present PT4=0,Give Alarm back pressure PT4-Low🤷🏻♂️
Based on the manual it is an ALCaP purifier. It basically separates liquids with different densities and at same time emoves dirty micro solids from the Lube Oil.
Watch ALFA LAVAL LUBE OIL PURIFIER 8,000 HOURS MAJOR OVERHAULING
ua-cam.com/video/8pMrwZEIzCM/v-deo.html
I have seen a lot of people on UA-cam who opens the steam inlet valve to the heater before starting the purifier pump unlike you. Your way is the right way.
Good Knowledgeable video of Alfa Laval Lube oil purifier
Very informative Idol ..pa shout-out po
Salamat po
Very hi tech..
Paano mag adjust feed rate?
💪👏
Hi lods Dto napo ako sa bahay mo hug kta, pasukli nalng po,salamat God bless you...
What does PT1 and PT4 stands for?
Sir good day. Thank you for the wonderful question, just read it today.
PT1 stands for Pressure Transmitter no. 1 which detects the feed lube oil pressure. While PT4 is Pressure Transmitter no. 4 which detects the clean lube oil or discharge pressure both transmitter work on the same principle they send 4 - 20 mA signal going to the purifier EPC and translate it to a digital numbers which will give us pressure reading on display.
@@marinongmakinistangpilipin2927Good day sir,maybe you know that the reason, Durind Start no have PT4 -0,before its working with minimum pressure PT4 -0.9/1.0bar,but after i disamble/assemble ONLY the paring tube(Sep.Bowl not dissambled)and tray to start no more pressure present PT4=0,Give Alarm back pressure PT4-Low🤷🏻♂️
How to read hydraulic system? Watch full video below. Thank you.
ua-cam.com/video/MOrELEm9vdQ/v-deo.html&feature=share
How to read Pneumatic System check link below
ua-cam.com/video/JhyTMA5REHg/v-deo.html
Sir is it ALCAP??
Based on the manual it is an ALCaP purifier. It basically separates liquids with different densities and at same time emoves dirty micro solids from the Lube Oil.