Deepcool CH160 | Insert 4090 FE and 7800X3D into the ITX chassis
Вставка
- Опубліковано 6 лют 2025
- GPU：RTX 4090 FE
CPU：AMD 7800X3D
Motherboard：ROG STRIX B650E-I
Cooler：DeepCool Assassin 4S
SSD：Samsung Pm9A1 1TB
Memory：G.SKILL Ripjaws S5 32 GB（16GX2）DDR5 6000
Power supply：ROG LOKI 1000w
Case：Deepcool CH160
I've watched alot of pc builds and not often do they show intake/exhaust flow in a animation like this very much loved it!
detail makes perfection
This makes little sense though as having intake from the back means you'll pull more dust into the case as its the one side with no filter. The case is designed for intake from the front and top, especially with a 4090 FE which pushes air out of the PCIe slot which would get sucked back into the case in this layout.
watch mr matt lee
I love that everything we learned about cooling the NR200 can be applied to the CH160 lol
What would be everything we learned about the NR200? I'm new to SFF computers
@@MitchellTheMitch mainly the back to front positive pressure airflow path I'd assume.
@@yanni-duff NR200 does not exhaust air at the front though.
@@trento7183 as with nearly any pc case, airflow is dictated by the user. It all depends on how you position the fans. Ideally you'd want an AIO radiator's fans or the fans directly pushing air into a tower coolers fin stack to intake so fresh air passes through compared to hot air circulating inside the case (most of the time because of the gpu exhaust).
@@yanni-duff That basically to maximize it's lack of front intake. This case literally has an all mesh front, with an additional fan slot for intake. Which is the traditional way of doing it. The rear isn't filtered, which even though it's an easy fix, out of the box this will be a more dusty setup than going with intake at the front and exhaust at the rear, due to the front being filtered.
The mini monitor at the end was amazing. Thanks for this video it really helps.
dude your builds are so fucking good and your video is amazing, no music, no nothing, just build. thank you for making this video. I would still put the exhaust towards the back though because i don't want hot air to be pushed towards me.
I wanted to have my CPU fan point the other way too but there are 3 problems for me when doing this.
1 - My CPU cooler will not allow me to do so.
2 - My PC case has dust filters at the front and is designed to be one direction only.
3 - The 4090 FE has a blower fan also which will still blow lots of hot air out the back of the PC and back into the CPU cooler regardless.
Nice touch to the airflow!! Impressive
What screwdriver is that? Share pls? Love this, its beautiful! Reverse airflow? How are the temps? 🤔
I always find it funny how the CPU cooler is just sticking out like a pimple compared to the other componenets
This is such a nice build; I love it.
Nice work. Some temp tests would have been nice, tho.
No need with the 7800x3d. That thing works fine even with a mid range air cooler! Honestly best CPU I've EVER run.
3:08 this is interesting. The cable provided when I bought mine was in opposite direction. This meant I had to keep the PSU fan inwards. It led to taking in warm air from the GPU.
This has to be a custom cable. You're right. The stock cable is angled the "wrong way for this PSU orientation.
What cable is recommended because I have the same issue! Thanks for any links you can provide
Такой кабель должен идти с подобным корпусом
It’s a difference in psu socket, my corsair lined up fine with the stock cable.
This video is fantastic! Beautiful build.
Thanks for airflow direction.
dont follow that air flow direction probably the worst way to set that up.
the front two should be intake and you should had a third on the back as exhaust. this would create a positive air pressure reducing the amount of dust build up and improving air flow and cooling. the way he has it set up now is creating negative air pressure which means its gonna try and pull air in from any crack or hole. thus more dust. decreased air flow and have reduced cooling.
The airflow si from rigth side to left side, because on the lefth side there is not dust filter
also you'll be a sweaty gamer
One thing that bothers me about this, the bend radius on the GPU power connector is not following the specification. Its not supposed to bend until 25mm away from the plug. Although it does look possible to achieve in this case, just wasn't in the video.
制作水准越来越高了呀
front and top as exhaust, winter case, put it under desk to warm feet and legs, but in summer,,,,,,,
That was a head scratcher!!
Budget Itx board needed
There are budget mini-itx mobo's available, gigabyte makes some.
Asrock A620i and 7800X3D is working wonderfully for me
After learning that nr200 will fit some matx MB's, i don't really think itx has a point in this pc layout anymore. If the GPU sits in the spot like in this case and nr200, the extra length of matx is almost irrelevant and will lower the price.
Facts, itx boards are so overpriced imo
@@ajendrafpsI think this case can fit micro atx or even atx
lmao bro got the CPU fan in reverse 3:30 (according to the fans direction)
They did that intentionally as it gives better temps to intake from the rear of the PC. This is due to the blow through GPU that he is using.
@HxTrinity respectable choice👍
Sadest monitor I ever saw a 4090 run on ...
Its just a testing monitor ?
What does sadest mean?
thats an ipad
@@TropicalCycLoL 🤣😆😅 that's a portable monitor.
@@MdZaoharDaud thats an ipad
very nice build..How is the cooling?
Cool build. I`d probaly add an intake fan and a dust filter behind the CPU-cooler tho.
Love the build. Have you done comparisons between standard cooling layout and this one. Seems counter intuitive with the FE card exhausting hot air right below the intake.
the NR200 has a very similar layout and most people find the best temps in it with the rear intake, and top exhausting. This case also has the front exhausting as well, which works well with how the founders card exhausts upward towards the top and front exhaust.
@@dexstrat9229 and ... gpu?
shouldnt intake will be more than exhaust or theres negative pressure ?
Would love to see what those temps are like inside the case.
I would like to ask what is the temperature of the gpu? :D
Interesting airflow! I’ve only seen if where it’s pulling air into the case from the front and top. Curious the know what temps you’re getting with those fans as exhaust!
its worst this is a horrible way to do air flow. its better to have the front fans as intake and add a third in the back as exhaust.
Nice build, would be tempted myself but surely that thing is gonna be loud.
I have a meshlicious with 13900k and 4090 FE, the AC is louder than it, can barely hear it
One of your RAM slots wasn't seated correctly btw, but sick build.
Nice catch!
is that a monitor or a tablet?
how is it connected if i may ask?
I’m getting the same motherboard and I have the assassin iv, I saw a build on PCPP and the assassin with the extra back fan fits,
I see Rem, I press like 💙
this was so satisfying to watch
Build with this case - Ryzen 5 3600 with RTX 3060 TI with Asrock B550 ITX/AC motherboard. Temps with this cooler between 60-70 under load. Love this case.
Isn't it going to be hot air blowing towards you with that setup with the cpu either on the left or right side of the monitor. Unless the front side facing the right side while the tempered glass side is directly facing the user. Nice build wanted to build an pc for me :D
What PSU cable is he using? The one that comes with that case is the wrong orientation for that specific PSU
This is going to be the exact build I'll do next (in a few weeks).
Maybe I'll go with the X670E-I instead of the B650, but other than that ;)
AMAZING BUILD!
Really loved this build with this CH160 case. Can you build one more with ATX PSU and a Stock CPU cooler?
No
I have the same build. Planning to buy a 4090 Founders for it. What are the GPU temperatures on a stress test ? Please let me know its the only vid on internet with my requirements.
primera vez q veo en estos ensables q ponene bien un flujo de aire
Why still use normal screw driver while u have digital one
Is there any way to turn off the led logo on the Assassin 4S?
How much does it weight ?
did you have to buy that power supply power cable, the one I got from DeepCool is facing the wrong the direction and won't allow me to install the power supply with the fan facing outward of the computer
Yeah he did, had the same issue, its from ncase
Nice! Quick question, your build includes air cooler for 7800x3d, is it Ok to apply air cooler for Ryzen 9 7900 with same config?
Yeah you'll be fine. even with a little air cooler a 7900 doesn't use much power
7900 has a lower tdp than 7800X3D so it should be fine.
its a shame you cant buy these cases at the moment.
You can still buy them under their American name "ShakingTank"
bro, may I ask what electric screwdriver you use?
Do you think an mini atx board might also fit in this case if tried?
Can fit an atx psu but only itx mobo
May i know the electric screw driver your using?
Pc is great, but what about temperatures? 🧐
any compare about intake air temperature?
What is this AM5 You put on the CPU instead of the stock one?
love it 😍
Why the exhaust blows towards the front?
What is that electric screwdriver?
Can this setup take a second ssd in the back of the mobo? Ik some mini itx mobos do
Rtx4090? In that case? I was gonna an Blanch of cpu and GPU power. I wonder what psu power you gonna choose
Where did u buy the L shape cable for Loki PSU because provided not supported
You really shouldve mentioned you had to get an adapter for the psu, really misleading, myself and others got this same setup and couldn't plug it in the same.
Agreed do you have a link for the cable you used for the build?
Can you explain ?
@@rnegoro1 The psu provided with the case extention cable doesnt fit the proper orinetation, due to the position of the psu port, you have to get a third party cable from ncase in order to use it the way he does in the video.
it's very cool, i wanna one in soon 😆
Display and screwdriver that used can you give product links
where does the gpu get its air from? from the bottom and only? this is epic lie blogger.
Жаль, что производители не заинтересованы в уникальных моделях деталей для компютера.
Я уверен, что можно сделать очень компактный и мощный компьютер. Даже внутри этого компьютера много пустующего места, а ведь если все хорошо обдумать и создать материнскую плату и видеокарту особенного форм-фактора, что можно сильно снизить габариты этих деталей. Самое сложное в таком компьютере это система охлаждения, нужно что-то, что смотреть отводить тепло от двух горячих парней.
I wonder how thermals looks under load for like 5hrs is a row...
is it possible to to fit a 317 mm gpu any way?
I love this case but all the 4090s are too long. I have no chance to get FE model.
What kind of monitor is that at the end of the video?
hardware wattage breakdown? totaly?
I absolutely love this case, but my god the idea of just have the power cable hang out the back just kills the whole case for me and makes it so I can't purchase it. Who the hell thought that was a good idea.
is that not an extension? im pretty sure it routes to the back where you would plug in a cable like you would any other pc case
@@ethanoux10 Most other cases this port would be screwed into the case but with this case the cable goes through a hole out the back and just hangs there.
Most videos don't show it cause it's god ugly but it's there XD
It's an extension male to female yes but the female side just hangs there.
It can't be THAT bad lmao, it's not that bothersome I'm sure
I'm confused with the airflow direction on this vid. It seems incorrect based on how he mounted the fans. Can someone confirm this?
not really if u know the mechanics of fan lol you can pretty much do anything as long you know the mechanics
basically what he did is, normally the cpu cooler is going to the right since u have intake in the right but for here what he did is different, he change the cpu cooler intake to the left because he put the back fan as intake and not exhaust which normally people do, so the right fan or front panel here is exhaust and he also put the top fan as exhaust
normally this is negative pressure since it has alot more exhaust the intake but he probably change the rpm speed of the fan of the back fan and cpu cooler to run a little bit faster than the exhaust fan which result to positive airflow
got it? you can do the normal thing like the cpu cooler is intaking to the right then the back fan is exhaust then put the top as exhaust and the front as intake the problem is since the fan on the right is like fighting each other since the top is exhaust and its near on an intake fan which basically happening is when ever the front fan intake air since the top is exhaust it just spew out the air and not reaching the cpu cooler. got it?
sooo its much better to follow what he did here, its good tho base on the mechanics of intake and exhaust and also remember top will always be exhaust because top rises and putting a intake fan near an exhaust like very close is a bad idea because the exhaust fan will just basically spew out the air when it enter
@@ajjames1960 Nice explanation! I have a couple of questions.
1. What if i don't add the top exhaust ?
2. Is this setup better since the 4090 FE blow out fan which is on top is also putting hot air into the case ?
Will an rtx 4090 zotac amp extreme fit in it??
噪音不小啊。4090是不是太热？
How much for this whole setup ?
What is the system fan?
Would an Asus TUF Gaming RTX 4080 Super fit in this case? I really want to use this case.
Yes
Assassin 4 (not 4s) would’ve worked better as it sits against the rear panel
hey just wondering where you got the extra 2 chassis fans? does it come with the case?
nope, you bought separately
Sad I can't buy anything Deepcool anymore in the states :(
Great case!
Temperatur test? With max. Cpu and Gpu Load?
no gpu sagging issue? or did you place a gpu support underneath?
It basically touches the bottom of the mesh case
Can you show the temp.
Can i fit 2.5cm ssd in the case too?
What is that Monitor you have ?
I have a CH170 with custom loop in it.
quanto custa sera para montar no br um desses ?
Why is this so satisfying
cool case but i needs vented side panel not tg. i rather get airflow then looking at it.
I'm interested about the complete price for this cool mini-box...?
Would guess 2.5-3k
熱風向前出 是不是跟官方的建議方向裝反了??
Idle temperature 100 degrees?
Amazing Built! Our brand released a daisy-chain connection pc case fan this month and we wonder if you are interested in featuring our products in your video.
本来挺感兴趣的，。看到最后这张显卡，感觉我的实力不允许我感兴趣。
Bench? Temp?
you know what, thi is cute but at the same time this is beast
SFF is PEAK
does G.SKILL Ripjaws S5 support AMD expo ?!
beautiful
Where can you find the fe edition?
That 4090 is going to heat up
Nice lookign but temps while gaming might be a problem.
This baby looks very neat and simply beautiful 😍