How to Change Oil 2011-2015 Chevrolet Cruze
Вставка
- Опубліковано 30 сер 2022
- Shop for New Auto Parts at 1AAuto.com 1aau.to/c/231/K/oil-filter-hou...
This video shows you how to do an oil change on your 2011-2015 Chevrolet Cruze. Replacing your engine oil filter is essential for a healthy vehicle.
This process should be similar on the following vehicles:
2011 Chevrolet Cruze
2012 Chevrolet Cruze
2013 Chevrolet Cruze
2014 Chevrolet Cruze
2015 Chevrolet Cruze
Tools you will need:
• 17mm Wrench 1aau.to/oxo/1AXAA00010
• 24mm Socket
• Torque Wrench 1aau.to/oTo/1AXAA00044
• Cloth Rags 1aau.to/oox/1AXSS00035
• Engine Oil
• Paper Towels 1aau.to/oox/1AXSS00035
• Bucket
• Drain Pan 1aau.to/omA/1AXAA00320
• Funnel 1aau.to/odc/1AXAA00310
Subscribe: / @trq
Check out our playlist:
Chevy Cruze 2011-2015 1st Gen: • Chevy Cruze 2011-2015 ...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - Авто та транспорт
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
Leave the oil filter out while you pull the drain plug. This ensures proper air-flow and lets the oil drain more smoothly and completely. Also, you don't need to replace the seal on the drain plug every time as it's a metal gasket. Not to mention the plug you put back on in this video didn't even have the gasket on it
The drain plug you took out isn't the same one you put in.
10 mm drain plug
How am i supposed to know what ur doing i dont even understand what part of the car u at
Thanks for clear and easy video to follow. 👍
What brand of motor olio yuo used please?
Do you need to change the seal of the drain plug?
Do u have to have a new oil ring every time ?
Thank you. This was very helpful.
This is the newest car ive ever personally done work on. Is it normal to take the oil filter out before draining the oil??
Does the O ring come with the oil filter ?
I noticed that is not a stock oil plug.stock oil plug is a prone-to-strip 10mm plug, one in video is after market larger head,which is what I recommend to replace w. But u used a replacement 10mm plug again,nooooo😂. 👍👍👍
Nice sharing
What brand of motor oil you used...ino full Synthetic
Learned it's not as easy as my truck
So what engine is this would be nice to know before starting the video, just saying
Are TRQ and 1Aauto Managed by the same team? This guy sounds so familiar.
This video starts out confusing. It would probably be helpful to tell people in the beginning what tools they need to complete the task so they can make sure they have them on hand, as well as, zoom out and show your viewers what part of the engine you're working in. Also, i dont think it's the best idea to change the filter with the dirty oil in it, but perhaps im mistaken
Where's the plug at?!? Literally watched the video just to find out where everything is at.... Smh
Why do you take out the filter while the bad oil is still in there makes no sense
And proceeds to put a brand new filter in😂
Filter housing is essentially mounted to the top side of the engine while all the oil is in the oil pan which is on the bottom of the engine. As long as you let your car sit for few minutes the oil will drain down into the pan. Since this is not a spin on metal housing filter the amount of old oil left in there is completely negligible therefore you can exchange your filter before you drain the oil out of the oil pan since the engine will not be started until old oil is drained out and new oil put in so no oil will circulate through that filter. So you can change that filter and o-ring seal before you drain the "bad oil".
Filter is above the oil pan pimp