Mitsubishi pajero/L200 starter motor solenoid and bendix change.2,5 TD.
Вставка
- Опубліковано 8 вер 2024
- FOR ALL YOU'R CAR PART NEEDS: tidd.ly/3H0rz8G
Hello guys,
Welcome after a bit of a break,in today's video i ame showing
how to solve a common problem with a 12 teeth mitsubishi starter motor fitted
in 2,5 TD and 2,0 d engines.
Thank you for watching and please sub to my channel for more videos.
July 5,2013
Very useful video! TODAY i was able to fix/clean my van starter motor because of your VERY INFORMATIVE video. My van is been sitting for over 2 weeks now until my searches leads me to you.Now its running again.
THANK YOU VERY MUCH!
It has been a while since you made the video but it really helped me figure out what the problem was with my toyota starter. I was able to fix it following your your diagnosis and the video. I really appreciate your help. I only spent 15 dollars on a new bendix and a couple of hours. Thanks a lot and greetings from México.
Thanks! I need to replace the Mitsubishi starter on my Mazda Tribute, which has a dead (not-pulling-in) solenoid - not quite the same model as you showed, but similar. I've got a second-hand one on the way, I'll check the brushes before I fit it.
Last starter motor I worked on was an old Lucas inertia starter. At least after watching your video I won't be going in blind.
Thanks for the tip on removing the cir clip at the en of the Bendix shaft.
Well done.
Спасибо большое! Реально, как по книжке помог разобрать и собрать стартер!!! Респект!
Thank you man. Informative on how to assemble and reassemble starter unit.
Great video. Just stripped down my genuine Mitsubishi Starter Motor. Very simple thanks to your video
Thank you for great tutorial you solve my problem i think is my flywheel bad i change the starter pinion like you said and problem is gone
Your accent is awesome mate. Half kerry half polish? Nice video 😆
Спасибо. Очень доходчиво рассказал!
Very good information, good help for my Mitsubishi van
Hello mate,
Often these types of problems arise from bushings wearing down.
And then the armature will start rubbing off the magnetic pole shoes slowing it down.
So it gives you impression like the bad battery does,
i dont think its something major,either bad bushings or bad brushes.
Cheers.
Hello mate,solenoid for all of those mitshubishi starters are quite common,
copy-paste the link i have in the description and it will bring you to the solenoid.
The only diffrence is that the push-on terminal is on the other side of the cap.
Pinion is not easy to find,10,11,12 tooth ones are common,but not nine.
I can check it for you tomorrow and let you know in the comment box,
Cheers.
;)
No they are not,i just lost a second long bolt and couldnt find it,
so i assembled the starter without it,which caused it to be bit lazy.
But i tell you mate A1++ for spotting this :D,i'm impressed.
Very useful video! Respect!
mycket saklig och nogrann genomgång hur man gör utan massa onödigt prat,
Great video! Very well explained! Thanks!
Good job .thanks
Great info thank you
Hello mate,
Its hard to tell what kind of a starter you have on it without any numbers.
But usually what is fitted on them is a mitshbishi starter with a clutch rather that pinion.
I might make a video for one of them shortly,maybe even tmrw cse its a video making day tmrw,the only problem is that the clutch might not be widely available.
I will check do i have any of them in stock and let u know,
Cheers.
Thank you so much for the info please post more videos on l200 please
Wow fantastic vid, very well put together and easily explained,, nice one.. Well done...
Great video, it help me with the pinion replacement.
What would happen if you put the fork backwards?
Muito bem explicado... Vídeo muito bom... Obrigado 👍 👍 👍 madeira-funchal
Thank you so much. Grassyass.
Excellent Video!!!! It helped A lot!!!
had a similar problem with a 4M40 2.8TD, solved!!! :D
Great work you
hey pal great video , I have two starters and both of them are doing the same now , turning and stopping then grinding like gear noise, how do I check the bendix , do I have to take it off and twist it, Mitsubishi l200 02,
Nice and Best video brader
welcome back martin,another great video.
Very usefull infoemation gived Thank's
Very good.
thank you
good job
Hey these are great videos, very informative, thanks for doing them. I wonder if you can give me your opinion on my starter in a pajero 2.8. When I turn the key, all I get is clicks, cant get the engine turning over. Suspecting a starter or solenoid problem. What d'you think?? cheers!
hye,
How did you see that the problem is the bendix in this starter?
(Great great video, realy thanks)
thank U for the info. my mitsubishi triton starter just brake down
hi how is my problem, at first start it go crank, in few second it go free. as if that the starter come free from the fly wheel
Great vídeo we in brazil whatch
Thank you so much
i hve question sir is the starter hve a problem when my battery energy getting low when im not able to start my car for 1 to 2 days..and when i start my car the starter sounds like that there is heavy on it..i tot d problem is on my battery but when i bought new battery,its still like that..i brought it to the shop the mechanic told me its on the armature of the starter is grounded and nid to be replace..thank you sir,i will w8 for ur reply...more power
Fantastic video! Really help me out. Thanks guys!! :-)
Mitsubishi starter M008T75071A/ ME 204424. Cannot seem to remove bendix assembly from housing in order to remove circlip with socket. It has round wheel cover with spokes that is part of housing in front. Bendix gear spring loaded. Suggestions?? What am I missing
Very Helpful , thank you :)
i used 2 open ended wrenches to put the circlip over the lockring 😉😆
Can solve my problem
Why Armature cummodator have black small circle after clean Armature work
THANKS....
@16:33 reduction gears are binded up a bit
Great video dude!
Great video, cheers mate
First, how much power(ampire) does this starter consume? Second, is it possible to operate this starter for 20 continuous minutes?
Hello, I have the same starter motor ( Mitsubishi M001T30xxx) and my problem is that after the motor starts my starter motor still spin for 2 more seconds. I have cleaned the starter motor and everything was ok. What can be the problem?
great!.
I have this problem in my 98 Pajero, sometimes after engine is hot and come to a stop, when i try do start it, it just makes grinding noises, so i think this is my problem.
you whether can check bendix, without setting on a car
Can somebody please tell me where the starter motor is located on a 00 Pajero. I cannot find the answer anywhere online at all.
Não entendi nada mais compreendi 🇧🇷🇧🇷
Shit hot. Thank you very much
Hellow every one ...plz .help .i want to install remote kit to engine start...posible
2.8.turbo disel .1998.exceed
I would have cleaned it too
лучше не разбирал
забыл вычистить от грязи да старой смазки и бендикс старый убитый не заменил
если у вас в Америке всё так ремонтируют да делают я вам сочувствую
присылайте к нам МЫ ваМ из самых старых огрегатов новые сделаем
for a moment is thought he must be Chinese .. some dirty mechanic..!