Kotto Fume Extractor (Practical Review)
Вставка
- Опубліковано 29 вер 2024
- Soldering Smoke Absorber, Electric Iron Welding Fume Extractor Soldering Smoke Absorber Remover DIY Fume Extractor Filter with Strong Suction.
A 24-inch flexible tube, Fume hood can adjust direction according to actual needs.
Adjustable optimized 6000 RPM high suction fan is low noise and allows you to remove fumes 5-6 inches away. The fan speed is adjustable. Suction: 40W, 6000 RPM, 52CFM, Noise Level: 55dbm, Life Expectancy: 50,000 hours, Static pressure: 125mmH2O.
Easy to replace the filter, Includes one replacement filter. Working temperature: -20℃～60℃, Power consumption: 120V-240V, 40W ( 12V, 4A Power supply).
📺 Subscribe ➡️ brodie.bz/UA-cam
📰 Features ➡️ brodie.bz/Read
🎧 Podcast ➡️ brodie.bz/Apple
✳️ Spotify ➡️ brodie.bz/Spotify
📸 Instagram ➡️ brodie.bz/IG
🐦 Twitter ➡️ brodie.bz/TW
👍 Facebook ➡️ brodie.bz/FB
#garage #work #soldering
With only the active carbon filter, the only thing that is captured is the odor/smell of the solder fume, all the nasty stuff is still blown out into your room.
Ask yourself, how can the bad things from solder smoke gets filtered, if you can look straight through the carbon filter ?
If you want clear air out of the fan, you need a HEPA filter AND a active carbon filter.
Oh how I wish I had read this before I bought a Hakko FA-400...
Yep why I bought the hepa to go with charcoal. Great review by the way.
@@agunther08 Which HEPA filter pads did you purchase for this unit?
@@agunther08 Where did you get HEPA filters for this? Was it a third party?
I was checking into a couple of these. I just by watching it of its performance it's very very bad. It comparison to other things I've seen for $89 is not worth it. I would rather buy 3 1 oz silver coins. At least I know I was doing the right thing
The nose real gets bad
I like your videos on Electronics, Audio and Video. However, I'm not into sports. I would love for you to split your Sports deal into another channel, kinda sucks having my feed full of Sports stuff I don't even enjoy.
The filter only works in the middle. This is waisting most of the filter. Maybe cut the filter into 4 and 3D print something that will hold it in the middle of the fan.