How to Set the T-Lock Servos | Traxxas TRX-4

Поділитися
Вставка
  • Опубліковано 17 жов 2024

КОМЕНТАРІ • 50

  • @toniwetzel4263
    @toniwetzel4263 Рік тому +4

    How can i change the direction the servo is turning? My front servo is turning in the wrong direction. Is it possible with the transmitter?

  • @hondafreak8613
    @hondafreak8613 Рік тому

    On TRX-4 is it better to lock differentials while wheels are rolling, stationary? Same with 2 speed transmission.
    2 speed made a loud snap first time I shifted it

    • @askewentree233
      @askewentree233 Рік тому

      Probably cause you were giving it throttle while shifting

  • @chepecho
    @chepecho 3 місяці тому

    Hi, any info on how to turn the micro servo counterclockwise ?

  • @OverRevvedRacing
    @OverRevvedRacing 3 роки тому +2

    Mine burnt up because it started freaking out and buzzing in the "unlocked" position... Have to send it back with an RMA... Kind of sucks that i have to send it in, then wait for them to look at it before they send me a new one.

  • @sonorangaming449
    @sonorangaming449 4 роки тому +1

    Will these fit on any other non- traxxas RC?

  • @christopherlessley6202
    @christopherlessley6202 6 років тому +4

    MY FRONT DIFFS DONT UNLOCK STRAIT OUT THE BOX:(

  • @MrYessireebob
    @MrYessireebob 7 років тому

    Already have most electronics readily available for a TRX-4 kit, please consider releasing one!

  • @1elaijah
    @1elaijah 4 роки тому +5

    They broke in 8 hours total use! Now what?

  • @lualrosaal
    @lualrosaal Рік тому

    Is it the same orientation for the TRX-6??

  • @alcurrie7620
    @alcurrie7620 3 роки тому

    Can i make the rear lock rather then the front locking first in the middle position of the switch?

    • @dezervon8285
      @dezervon8285 3 роки тому +1

      Hey, you can do it by switching the servo plugs in the receiver. Default is front-channel 4, rear - channel 5.

  • @insertnameherereee2802
    @insertnameherereee2802 10 місяців тому

    Working on a customer vehicle his controller, receiver fried and his diff lock in the front is backwards now with the new controller & receiver

  • @adnebijleveld61
    @adnebijleveld61 3 роки тому

    Is there a video for the trx-6?

  • @m_atrix
    @m_atrix 2 роки тому +1

    it was enough at the level of the apparatus settings to create the possibility of adjusting the operating range of the servo. I admit that after traxas I expected more

  • @ka4172
    @ka4172 7 років тому

    The steering servo runs on mine TRX4 over the stops on the axel,i set up the servo to a small space.

  • @dillonwhite9581
    @dillonwhite9581 3 роки тому

    Where do you get those horns?

  • @scribby2667
    @scribby2667 Рік тому

    how to unreverse the tlock front servo

  • @JUMBOs-RC
    @JUMBOs-RC 6 років тому +2

    Mine is bad out of the box, front diff lock won't fully disengage

  • @t.t.6398
    @t.t.6398 6 років тому +1

    My receiver went bad replaced it but now my front diff is reversed and I can't figure out how to correct it! So frustrating! Gonna call Traxxas in tomorrow hopefully they can tell me how to fix this cause the instructions are useless. Blinking green light, WTF?

    • @ethanhenry7553
      @ethanhenry7553 6 років тому +1

      Terry Tiell me too

    • @ethanhenry7553
      @ethanhenry7553 6 років тому

      Terry Tiell just search how to reset your remote to factory default then it should be good

    • @t.t.6398
      @t.t.6398 6 років тому +1

      Ethan Henry Hey Ethan give Traxxas support a call, they walked me through step by step how to do it and it's all fixed now! Traxxas is great with the support! I wish I could help you more. Good luck and keep me updated! 😁👍

  • @3LD3VIL
    @3LD3VIL 7 років тому

    How you set the low high servo please

  • @MarcoMayhem
    @MarcoMayhem 4 роки тому

    Is this the same for the trx6?

    • @msdos32
      @msdos32 4 роки тому

      The front servo is the same, the rear isn’t. Because the rear is locking two cables at once, it has a different horn. You want both horns perpendicular on the TRX-6

  • @Rebuiltr.c.
    @Rebuiltr.c. 7 років тому

    hey how do I replace the reciver in my traxxas slash? is the one cord just the wire that goes through the attenna

    • @TraxxasSupport
      @TraxxasSupport  7 років тому +2

      Yes that is the only wire attached to the receiver. Unplug the other components like the ESC and servo and plug them into the new receiver. Stick the receiver down with double sided tape in the receiver box, and you may need to bind the transmitter and receiver. See our video on that topic and also how to properly seal the receiver box.

    • @Rebuiltr.c.
      @Rebuiltr.c. 7 років тому

      Traxxas Support do you have a video on it

    • @TraxxasSupport
      @TraxxasSupport  7 років тому +1

      No but there are instructions in the manual:
      traxxas.com/sites/default/files/58034-2-OM-N-EN-R00.pdf

  • @ozzyg82
    @ozzyg82 3 роки тому +1

    1:39 that appears to be turning clockwise...?

    • @tikkabrno
      @tikkabrno Рік тому

      It turned to the left. What do you mean?

  • @GastonMaqueda
    @GastonMaqueda 3 роки тому +2

    Traxxas RC cars have a great quality. I'm so happy with my TRX4
    But the electronics are terrible bad. For the price of the products needs to come with much better electronic
    I have my TRX4 for two month and I already repleace the steering servo (Broken after the third use), and now 2 weeks after, the front diff lock servo.
    Happy with the truck
    Very dissapointed with the electronics.

    • @me-rn7jx
      @me-rn7jx Рік тому +2

      ive had mine stock for a year now driving daily with 0 maintenance and zero broken parts i just know my shocks need oil those are dry 😂 but idk ive had no issues driving in any tempature

    • @GastonMaqueda
      @GastonMaqueda Рік тому

      @@me-rn7jx Lucky you bro

  • @ryanwalker9472
    @ryanwalker9472 5 років тому +5

    ive stripped like 4 of these

  • @Mattt7940
    @Mattt7940 4 роки тому

    Thank you

  • @zanehaselden5573
    @zanehaselden5573 Рік тому

    Mine just keep clicking after you engage the diffs. Even with a brand new servo. So done with this servo bs.

  • @JonR35
    @JonR35 Рік тому

    Wished it was rear lock instead of front lock

    • @timommering7645
      @timommering7645 Рік тому

      You can reverse the channels, this way rear locks first.

  • @findleyjull
    @findleyjull 3 роки тому

    Man I should have watch this video before I snapped it

  • @justinbarnard7868
    @justinbarnard7868 2 роки тому

    Same with trx6

  • @midavIV
    @midavIV 3 роки тому

    bad servos. For that kind of money you need to buy TX-4

  • @hamiltonadventures8537
    @hamiltonadventures8537 6 років тому

    Fucking junk dont buy one