Nice job! I used your video to install this guard on my 2014 Silverado. It would have been a lot more difficult without the video. I would suggest that you redo the parts you left out. You mentioned that you jumped ahead. My biggest problem was loosening the original bolt. Penatrating oil came in handy although it was still difficult. You mentioned that you had "issues" with on of the cross bars. So did I. The threads on one end was off. I used a tap to deal with this. The directions are not that great. Without this video the job would have taken much longer. Thanks.
Ira Rosnel thank you. I know I should have done the parts I left out I was just cold and outside so it was challenging to record and do things by myself. I tried my best to explain what I did in order to get the job done for those parts I missed. I just started working and completely forgot to record. Also some of the parts where a two hand job as I’m sure you could tell so it would have been really hard for me to record that. I do appreciate the feedback though as when I make more videos that involve upgrades like this that I try my best to cover everything that’s being done
Did you follow the directions with putting it together on the ground and then lifting it to install or did you install one piece at a time on your truck
One piece at a time. The part where I skiped ahead a bit is where I needed to hands to really put it on you’ll have a hard time fitting the middle steps in too once you get the side vertical bars on it’s real tight
@@T3CHNOskillz Thank you for the fast response, I am putting one on my 2005 Chevy Express Conversion Van with the headlight brush guards. You are right the direction are not clear, I had to cut a inch hole in the top plastic part on top of my bumper just to get at the bumper bolt and install their bracket, if I took the plastic piece off it would of broke all the clips, but their bracket covers the holes Thanks for the advice and I think I will make a video because the Chevy Express and GMC Savana have not changed in years
Im wondering if this would interfere with the collision avoidance system. I lie this type of grille guard and thought about putting it on my Suburban. Might try calling the company and ask if they have had any experience with it.
I don’t know personally but I couldn’t imagine it effecting that. With it only covering a small portion of the bumper I would hope not. But without having collision avoidance I wouldn’t know. You might have to call them on that one
How long is the middle bar with the go rhyno sticker, I think mine is too short. It does not sit flush like the other ones, I have like a half inch gap on both sides. It looks bad,, Can anyone help ??
@@tonylandaverde8129, that's BS! Did you order through Go Rhino! directly or go with someone else (Amazon, Real Truck, etc.)? I'd call Go Rhino!, Tony. Someone in their QA dept was sleeping on the job.
Go Rino what a joke they are..from 03 to 07 they made brush guards for vans but not for Silverado or Sierra. pickups....they must have warehouse still full of brush guards for vans...
This made my install on an 2018 GMC so much easier. Many Thanks!!!!!
Glad I could help. Where your instructions unclear too?
@@T3CHNOskillz yes. Inst were not a lot of help.
@@T3CHNOskillzjust got a new go rhino 3000 series, and the instructions are expletive bad.
Just bought that one from Amazon, can’t wait to get that on my GMC , great video
Nice job! I used your video to install this guard on my 2014 Silverado. It would have been a lot more difficult without the video. I would suggest that you redo the parts you left out. You mentioned that you jumped ahead. My biggest problem was loosening the original bolt. Penatrating oil came in handy although it was still difficult. You mentioned that you had "issues" with on of the cross bars. So did I. The threads on one end was off. I used a tap to deal with this. The directions are not that great. Without this video the job would have taken much longer. Thanks.
Ira Rosnel thank you. I know I should have done the parts I left out I was just cold and outside so it was challenging to record and do things by myself. I tried my best to explain what I did in order to get the job done for those parts I missed. I just started working and completely forgot to record. Also some of the parts where a two hand job as I’m sure you could tell so it would have been really hard for me to record that. I do appreciate the feedback though as when I make more videos that involve upgrades like this that I try my best to cover everything that’s being done
Did you follow the directions with putting it together on the ground and then lifting it to install or did you install one piece at a time on your truck
One piece at a time. The part where I skiped ahead a bit is where I needed to hands to really put it on you’ll have a hard time fitting the middle steps in too once you get the side vertical bars on it’s real tight
@@T3CHNOskillz Thank you for the fast response, I am putting one on my 2005 Chevy Express Conversion Van with the headlight brush guards. You are right the direction are not clear, I had to cut a inch hole in the top plastic part on top of my bumper just to get at the bumper bolt and install their bracket, if I took the plastic piece off it would of broke all the clips, but their bracket covers the holes
Thanks for the advice and I think I will make a video because the Chevy Express and GMC Savana have not changed in years
Im wondering if this would interfere with the collision avoidance system. I lie this type of grille guard and thought about putting it on my Suburban. Might try calling the company and ask if they have had any experience with it.
I don’t know personally but I couldn’t imagine it effecting that. With it only covering a small portion of the bumper I would hope not. But without having collision avoidance I wouldn’t know. You might have to call them on that one
How long is the middle bar with the go rhyno sticker, I think mine is too short. It does not sit flush like the other ones, I have like a half inch gap on both sides. It looks bad,, Can anyone help ??
I’ll measure mine tomorrow and let you know
All of my bars are 37 inches wide from inside bar to inside bar
@@T3CHNOskillz Thanks for checking! that’s the problem my top & bottom bars are 37 and the middle is 36 inches.
@@tonylandaverde8129 that’s weird that one is smaller. Might have to try and add some washers or something
@@tonylandaverde8129, that's BS! Did you order through Go Rhino! directly or go with someone else (Amazon, Real Truck, etc.)? I'd call Go Rhino!, Tony. Someone in their QA dept was sleeping on the job.
Go Rino what a joke they are..from 03 to 07 they made brush guards for vans but not for Silverado or Sierra. pickups....they must have warehouse still full of brush guards for vans...