Chevy S-10 hinge pins, door pin replacement 2000 2001 2002 2003

A quick video on how to replace worn hinge pins and bushings on the Chevrolet S-10 Pickup. Helps fix the sag in the door and having to slam or lift the door all the time. Be careful when both pins are out, because the door can drop. With the door roller spring you can also pry it out and then clamp it in a vice and loop some steel wire through the coil spring, to hold it tight together, and then cut the wire when it is in place, but wear goggles as the spring can fly out. Do not use copper wire. It will break. Hinge pin kit used is Dorman part number 38419. 2 Kits are required. This repair took about an hour and a half. With a helper it would have gone a bit quicker.

[@bogger_welder]

Just found your video thanks much for posting this👍🏼

[@ArtEssay70]

About to go out and start the prices for the drivers side. Stahodad, excellent execution, great this old fashioned layman terms instructions. The tiny details were very much appreciated a lot of times people don't remember to mention every little detail and it's very helpful thank you for being so thorough. Great video!

[@zachfox5969]

My top hinge inserts were rusted out.

[@waltersteffensthezr2man431]

Good old crew cab got to do mine again LOL 🤣

[@gailtaylor1636]

Use a bolt and nut to press the bushings in.

[@IodaJoey]

How do you replace the inside pin on the top side? This video shows both outer pins. I need to replace the pin with the roller, not the two that have bushings.

[@marksayre1358]

Does anyone know if JB Weld can be used to fix door hinge on 2000 Blazer ?

[@350toocute]

There`s a co. named Total Automotive.OEM Parts Specialist.com.This is where I bought my front door hinge pins and bushings.They cost a little more than Dorman Brand but well worth it.

[@Gprospot]

Endurapins worked better than dorman for me.