Will deffo look at fitting one of these as she is now run in nicely.As far as wind noise goes the Schubert C3 pro does the trick.I am loving my "sleeper" bmw S1000xr.
Actually is not being old...its more like being mature rider, im only 37 and im looking forward to have this bike, have sports before but this one has the best od both worlds, touring and power
They are a great bike, make sure you don’t pick one up with tired cams though on low mileage as they had a case here ing issue with the gen 1 models . Just be careful if they sound excessively rattle continually
That is one of the best sounding exhausts ive ever heard. You scored there mate. It also got rid of the only bad point i find in this bike which is the ugly looking stock exhaust at the stupid horizontal angle. Have you posted any videos riding the bike and giving your opinion of the effectiveness of the screen? Let me just say that you have one of the most beautiful bikes ive seen, colour, screen and all. Thanks.
Hello mate, now that you have had the Hypershots for a while can you tell me please if 1. the tips have discoloured and 2. has the black faded. Others have told me this can happen and I'd be interested to hear from you on this as Im looking to buy a set. Thank you.
Having read the on-line reviews I settled on this one and bought it on EBay (Aus) MRA Variotouringscreen "VTM" for Bmw S1000 XR 2015- smoke grey 4025066154272 AU $166.51 +AU $49.62 postage From Germany
Get these Cobras or any other LOUD exhaust pipes! I had so many close calls already with the quiet stock pipes! Bright lights and loud horn will also help Cagers see & hear you!
Very easy and straightforward. You first need to remove the 3 external screws on each pipe and put aside, before removing the 3 internal screws (on each pipe) that holds in the baffle. With the baffle retaining screw undone, the baffles lift out. To complete the job, simply replace the 3 external screws (on each pipe). Job done.
Thanks mate ... very useful ... both in relation to the screen and the Cobra mufflers (killer looks). I want both for my 2017 XR ... but will have to save the pennies for a bit longer !
Thanks Darrell. I didn't weigh the OEM muffler but it was really heavy....I'm guessing about 8kgs. The Cobra Ultrashorts are feather weight, lucky to be 1-2 kgs! Cobra's website for your interest is www.cobra-exhaust.com/. Peter
Very simple and straight forward. The only fiddly bit is removing the baffles, if that is what you want to do. You need to remove the tips first then the baffles and refit the tips. I used a small amount of locktite (or similar) on the threads of the screws when refitting the tips to ensure they don't vibrate loose. BTW, I watched your video on fitting the Evotech bar end weights. You were so impressed I went out and bought some as well. I agree, BIG difference. Thanks
Great thanks! baffles will be staying in! I live in germany and it's highly illegal to remove move, got caught with them out on another bike and it cost me three points on my licence and a 280 euro fine. It's the first thing the coppers look for if you get pulled over....bugger. glad you like the bar ends, makes a great difference
Only if you know what you are looking at. Have another look at my video - it shows the difference. There is little difference between the internal appearance of the pipe with the baffles in or out. If you reinserted the screws after removing the baffles you wouldn't be able to tell.
Great video Peter. I just purchased my 2017 S1000XR same color as yours. Question about the rim stickers you installed. How much gap between each sticker ?
Can't really comment other than you measure the circumference of the rim divide that by the number of rim stickers you are putting on and mark up your rim accordingly. Take your time it's pretty straight forward. Good luck.
Hi Peter, perfect exhaust system. I guess I will contact the Cobra guys too. Beside that could you give me a link where you purchased these beautiful wheel rim stickers. I need to have those...Thank you in advance and best regards. Karsten
G'day Karsten. The rim stickers are on eBay from "stickersuk". I thought of applying only 3 x stickers per side but ended up deciding 5 x stickers per side looked best. Stickersuk seller is great!
Nice video Peter...love the bike set-up, she looks sharp. Couple of questions if you don't mind? How do you like your aftermarket windscreen vs. stock? I'm looking to replace mine and haven't picked one yet. Did your bike come stock with the Batilax tires? Mine came with Pirelli Rosso 3's. Interesting. The look of the HP seat is much nicer, how's the comfort level compared to stock?
Hi Tim, The screen is definitely an improvement over OEM but not astoundingly better. Once you understand the effect the 6-positions of the secondary aerofoyle has on the air flow it does knock down a lot of the wind impact. Coupled with the screen height adjustment you can be completely protected and I'm 6'4" tall. Bike came with the Bridgestones. I'm happy enough with them but would probably change to the Pirelli Rosso III when the time comes. As far as the seat is concerned, this is the BMW HP tall seat and it's a great seat, perfect for me and very comfortable. Hope this answers your questions. Also purchased the Evotech water and oil radiator guard. Let me know if you want for info. Regards Peter
Thanks Peter......I really like the seat and it's on my short list of things to get, it's nice to here it's comfortable. I also agree that the Evotech radiator and oil guards are a must. From all the aftermarket ones available, Evotech seem to be the best quality out there. Thanks again for your input and posting videos......it makes it fun for all of us!!
Hi Peter, great video. I'm keen to know whether that is a HP "tall" seat or standard height HP seat? I too have the XR and live in the Dandenongs. I'd be keen to have a look at your set up
Hi Pete Yes it's the HP tall seat. Different shape to the OEM and has thicker upholstery. Very comfortable. I'm 6'4" and 110 kgs so suits me perfectly. Regards Peter
Thanks mate. Sorry about the soft audio. I am somewhat an amateur at making videos but you can hear it if you crank up the audio (at least on a PC). In any case to answer your question, it is a simple slip-on pipe.
Finally fitted the sane exhaust! Great looking and sound, very happy with it. I’ve removed both db killer, loud but not too much, still acceptable even for touring. The only problem is too much popping in dynamic mode, is that normal?
Hi, I'm guessing there is a performance improvement but I haven't measured HP before and after. The weight saving is substantial! This new Ultrashort pipe weighs next to nothing!! It feels faster and sounds 'faster'. It does attract a bit attention from on-lookers. Regards Peter
Hi Peter, one more question. I contacted the Cobra guys (Speed Products) in Germany and asked them for the HP data sheet with the Cobra including the DB-killer on an S1000XR. It looks like they don't want to publish it. Do you feel any decrease in HP. I found some posts with Kawasaki drivers. They mentioned 20 km/h less top speed after they mounted a Cobra exhaust slip on.
That is a gorgeous looking bike, I love that colour scheme. I'm thinking of trading my GSA for an XR but I think the XR may be too tall for a shorty like me.
Hi, Cobra USA does seem not to be connected with Cobra exhausts Germany where I bought mine from. Check out their Facebook page on this link: facebook.com/cobraexhaust/photos/a.10153839461278968.1073741856.321052378967/10153839461743968/ They are great to deal with. Regards Peter
My Cobra order form looked like this: Cobra Hypershots Ultrashort Prime Slip-on Road Legal/EEC/ABE homologated BMW S 1000XR x 1 403,32 € mattbrushed tips x 1 0,00 € stainless steel mattblack x 1 168,03 € Cobra 2016 Laser Decal x 1 0,00 €
I nearly bought one in 2017 but my legs were a bit too tucked up for my arthritic knees 🙁 I can't understand why they didn't follow the lines of the tail unit with the exhaust can either. They just don't seem to flow with each other. Not that my ramblings take anything away from what's possibly the best bike around at the moment tho 🤣👍👍
Hi, I’ve the same bike and want to fit the same exhaust, actually the only one looking nice on this bike. Can you confirm no drop in performances, with or without db killer? I think I’ll remove the db killer, though. Suggestions on where to buy it? Thx!!!
You'll love it! No performance drop. Feels and "sounds" like it's faster! Read the posts below and my replies for the full details on where to buy and the costs I paid. All the best Emiz.
Peter, I think I’ll buy it from the german website, maybe steel version that I’ll paint black (the black coat option costs too much!!!). Do you finally run it w/o db killer? Do u have any backfiring? Any problem of water into the muffler when it rains or washing the bike, given the ending inclination? Thx again!!!
If you run the bike in Rain or Road mode there are no pops, farts or crackles just a sport bike exhaust note But if you change to Dynamic Mode then you'll get a fantastic orchestra of exhaust sounds including exhaust pops, farts and crackles on deceleration. It's an addictive sound that all your riding mates will rave about. Awesome!
Just enough of a volume increase to make the bike nice and spicy and gets rid of that humongous stock can. If I'm gonna get this bike I'd probably run it with the baffle.
Contact Auri to order! Hey Kevin, you can place your order here: www.cobraexhaust.de/Cobra-Hypershots-Ultrashort-Prime-Slip-on-road-legal-EEC-ABE-homologated-BMW-S-1000XR_2 THX Auri Huesmann Cobra Exhaust
Bike looks beautiful. For the exhaust, this video says the dB killers are welded in. Is that right? How hard was it to take them out? ua-cam.com/video/jHClAMVMh9A/v-deo.html
Für mich persönlich leider ein Fehlkauf. Sound finde ich bei meiner 2018er XR weder von der Lautstärke noch vom Klang her großartig anders als die Original-Tüte. Dazu kommt, dass nach Anbau das typische knallen bei Nutzung des Blippers und beim Gas wegnehmen ohne auszukuppeln komplett weg ist. In allen Modi. Dazu Cobra und Wunderlich (dort gekauft) angeschrieben zwecks Klärung = Null Reaktion bei beiden Firmen auch nach 2 Wochen. Bleibt für mich nur die deutlich bessere Optik gegenüber der Original-Tüte und nur dafür muss ich klar sagen, waren 700 Euro rausgeworfenes Geld. Wer sowas sucht -> gebe den Auspuff gern ab. Preis verhandeln wir.
Will deffo look at fitting one of these as she is now run in nicely.As far as wind noise goes the Schubert C3 pro does the trick.I am loving my "sleeper" bmw S1000xr.
Great job on the explanation and videos of the difference. I found your video very informative.
Thank you
Best looking and sounding BMW 1000XR on UA-cam!
Thanks man Appreciate it.
No way mate, the sounds wicked. I’m getting those
I test rode a 2018 S1000XR....it will be my next bike!!!
Best colours bar none👍🏼
Actually is not being old...its more like being mature rider, im only 37 and im looking forward to have this bike, have sports before but this one has the best od both worlds, touring and power
The most beautiful bike i have ever seen!
Thanks man...
Pretty damn hot it is. Cheers from 🇨🇦
They are a great bike, make sure you don’t pick one up with tired cams though on low mileage as they had a case here ing issue with the gen 1 models . Just be careful if they sound excessively rattle continually
Nice looking pipe Peter! Could you give me a link from where you got it?
Great look,great sound.Thks.
Great looking bike and great looking exhaust. Ride safe.
Thanks mate..
That is one of the best sounding exhausts ive ever heard. You scored there mate. It also got rid of the only bad point i find in this bike which is the ugly looking stock exhaust at the stupid horizontal angle. Have you posted any videos riding the bike and giving your opinion of the effectiveness of the screen? Let me just say that you have one of the most beautiful bikes ive seen, colour, screen and all. Thanks.
I PUT AN SC PROJECT ON MINE, SOUNDS FANTATIC AND SPITS FLAME ON THE AUTO DOWN SHIFT
Bjr j'ai la même et franchement c'est vraiment une superbe machine ...la qualité la sécurité la tenue de route .le ptit cobra est vraiment sympa
Nice set up, I've never seeing that brand before. cheers.
Hello mate, now that you have had the Hypershots for a while can you tell me please if 1. the tips have discoloured and 2. has the black faded. Others have told me this can happen and I'd be interested to hear from you on this as Im looking to buy a set. Thank you.
Magnifique avec le cobra
Looks and sounds fantastic.
Great exhaust video though bud
I have the same bike in the same colours; I’m gonna be fitting that exhaust; sounds excellent 👍👍👍👍
Great sounding cans, would you please advise the brand of ur screen, like the idea of a deflector too. Thanks
Having read the on-line reviews I settled on this one and bought it on EBay (Aus)
MRA Variotouringscreen "VTM" for Bmw S1000 XR 2015- smoke grey 4025066154272
AU $166.51
+AU $49.62 postage
From Germany
Get these Cobras or any other LOUD exhaust pipes! I had so many close calls already with the quiet stock pipes! Bright lights and loud horn will also help Cagers see & hear you!
hi there
can i ask how easy it is to remove and/or refit the baffles please
Very easy and straightforward. You first need to remove the 3 external screws on each pipe and put aside, before removing the 3 internal screws (on each pipe) that holds in the baffle. With the baffle retaining screw undone, the baffles lift out. To complete the job, simply replace the 3 external screws (on each pipe). Job done.
Thanks mate ... very useful ... both in relation to the screen and the Cobra mufflers (killer looks). I want both for my 2017 XR ... but will have to save the pennies for a bit longer !
Great bike.. good luck with yours
This bike is perfect man!!
Thanks man, much appreciated.
Still have the bike? Any problems with it?
Sick sick sound and looks amazing. Wonder if the rear brake would benefit from the stream of hot air...
really nice! any remap required?
Thanks. No re-map required. The oem headers and exhaust valves still in place.
Very nice sound ! Is there any Data on HP increase and weight difference ?
Thanks Darrell. I didn't weigh the OEM muffler but it was really heavy....I'm guessing about 8kgs. The Cobra Ultrashorts are feather weight, lucky to be 1-2 kgs! Cobra's website for your interest is www.cobra-exhaust.com/. Peter
Could you unhook servo cable for another sound check ? Also I can't find Black with silver tips.
Try their Facebook page:
facebook.com/cobraexhaust/photos/a.10153839461278968.1073741856.321052378967/10153839461743968/
is that a factory sticker kit or aftermarket ? where did you get that ?
sounds good also
Thanks. It is a laser cut logo applied during manufacture
Hi there
I've just ordered this exhaust, sounds amazing! did you fit it yourself, if so was it easy enough to fit?
Very simple and straight forward. The only fiddly bit is removing the baffles, if that is what you want to do. You need to remove the tips first then the baffles and refit the tips. I used a small amount of locktite (or similar) on the threads of the screws when refitting the tips to ensure they don't vibrate loose.
BTW, I watched your video on fitting the Evotech bar end weights. You were so impressed I went out and bought some as well. I agree, BIG difference. Thanks
Great thanks! baffles will be staying in! I live in germany and it's highly illegal to remove move, got caught with them out on another bike and it cost me three points on my licence and a 280 euro fine. It's the first thing the coppers look for if you get pulled over....bugger. glad you like the bar ends, makes a great difference
can you tell just by looking at if the baffles have been removed?
Only if you know what you are looking at. Have another look at my video - it shows the difference. There is little difference between the internal appearance of the pipe with the baffles in or out. If you reinserted the screws after removing the baffles you wouldn't be able to tell.
Hey ! Question! Does the exhaust pop and bang when releasing throttel?
Great video Peter. I just purchased my 2017 S1000XR same color as yours. Question about the rim stickers you installed. How much gap between each sticker ?
Can't really comment other than you measure the circumference of the rim divide that by the number of rim stickers you are putting on and mark up your rim accordingly. Take your time it's pretty straight forward. Good luck.
Thanks Peter
Amazing sound man !!!!!!!
Thanks mate, appreciate it
Congrats, nice bike. Can you reinstall the db killers? Also, were did you get those seats? Thanks in ADV
Yep. Its just 4 screws. To get access to one of the screws the pipes have to come off the bike All pretty simple stuff really. Thanks
Forgot to ask... what seat is that?
Hi Peter,
perfect exhaust system. I guess I will contact the Cobra guys too. Beside that could you give me a link where you purchased these beautiful wheel rim stickers. I need to have those...Thank you in advance and best regards.
Karsten
G'day Karsten. The rim stickers are on eBay from "stickersuk". I thought of applying only 3 x stickers per side but ended up deciding 5 x stickers per side looked best. Stickersuk seller is great!
Nice video Peter...love the bike set-up, she looks sharp. Couple of questions if you don't mind? How do you like your aftermarket windscreen vs. stock? I'm looking to replace mine and haven't picked one yet. Did your bike come stock with the Batilax tires? Mine came with Pirelli Rosso 3's. Interesting. The look of the HP seat is much nicer, how's the comfort level compared to stock?
Hi Tim,
The screen is definitely an improvement over OEM but not astoundingly better. Once you understand the effect the 6-positions of the secondary aerofoyle has on the air flow it does knock down a lot of the wind impact. Coupled with the screen height adjustment you can be completely protected and I'm 6'4" tall.
Bike came with the Bridgestones. I'm happy enough with them but would probably change to the Pirelli Rosso III when the time comes. As far as the seat is concerned, this is the BMW HP tall seat and it's a great seat, perfect for me and very comfortable.
Hope this answers your questions. Also purchased the Evotech water and oil radiator guard. Let me know if you want for info.
Regards
Peter
Thanks Peter......I really like the seat and it's on my short list of things to get, it's nice to here it's comfortable. I also agree that the Evotech radiator and oil guards are a must. From all the aftermarket ones available, Evotech seem to be the best quality out there. Thanks again for your input and posting videos......it makes it fun for all of us!!
Beautiful!!!
very nice! where did you get the rim tape from?
Timo Marant
The rim stickers were purchased on eBay from seller "stickersuk". See one of my replies below to the same question. Cheers.
which year is this XR 1000 model? beautiful
Hi Peter, great video. I'm keen to know whether that is a HP "tall" seat or standard height HP seat? I too have the XR and live in the Dandenongs. I'd be keen to have a look at your set up
Hi Pete
Yes it's the HP tall seat. Different shape to the OEM and has thicker upholstery. Very comfortable. I'm 6'4" and 110 kgs so suits me perfectly. Regards Peter
Great video, Looks and sounds awesome, does the bike need re-jetted for that endcans
Nah, all good. Exhaust cracks and pops on decel which sounds really cool.
Do you have to remap the bike with these gorgeous looking end pipe?
No need for any re-mapping. Catalyst and exhaust servo valves remain in place. Cheers
hi Peter I'm talking about the grey red graphic kit on the whole bike. not the exhaust. is it aftermarket kit ?
It's the new for 2016 factory design. Factory sticker kit.
Does it still popping when downshifting in dynamic with mufflers?
Great bike.
With the Cobra muffler (baffle in or out) and in Dynamic mode it crackles, pops and farts on deceleration...it sounds awesome.
@@MrPeterDWatson Ok thanks bro! What about your bike? Euro4 2016? is the sound really better than the stock one?
Could you tell me if the black sleeve is the Matt option or the ceramic one ? Think you said the tips are the optional polished ones.
I ordered mine with the mattblack pipe finish with the polished SS exhaust tips and laser cut decal.
Any idea where we can find the exhaust to buy?? Thanks
Is this a full system, or slip-on? I can't hear anything you're saying in the video, but your XR is gorgeous!
Thanks mate. Sorry about the soft audio. I am somewhat an amateur at making videos but you can hear it if you crank up the audio (at least on a PC). In any case to answer your question, it is a simple slip-on pipe.
Finally fitted the sane exhaust! Great looking and sound, very happy with it. I’ve removed both db killer, loud but not too much, still acceptable even for touring. The only problem is too much popping in dynamic mode, is that normal?
Yep. Pops and crackles. Sounds very cool IMO. I believe Dynamic Mode leans out the fuel mixture a little.
what about power increase?! is there any added hp on the bike with your new exhaust?!
Hi,
I'm guessing there is a performance improvement but I haven't measured HP before and after. The weight saving is substantial! This new Ultrashort pipe weighs next to nothing!! It feels faster and sounds 'faster'. It does attract a bit attention from on-lookers.
Regards Peter
+Peter Watson Thank you very much indeed for the answer.
wonder if they will fit the 2020 one?
Hi Peter, one more question. I contacted the Cobra guys (Speed Products) in Germany and asked them for the HP data sheet with the Cobra including the DB-killer on an S1000XR. It looks like they don't want to publish it. Do you feel any decrease in HP. I found some posts with Kawasaki drivers. They mentioned 20 km/h less top speed after they mounted a Cobra exhaust slip on.
3:08 hope you didn't forget to screw back in ahah !
How did you remove the db baffles?
Remove the outside screws that hold the chrome tip on, then remove the screws inside the pipe that secures the baffle
@@MrPeterDWatson Thank you, Peter Watson!
How do you removed? Thanks
Thanks For info Went and got one I thought My Kawasaki Z1000sx was good . this bike is Fantastic So easy to Ride
That is a gorgeous looking bike, I love that colour scheme.
I'm thinking of trading my GSA for an XR but I think the XR may be too tall for a shorty like me.
Where can I buy Ones ?
www.cobra-exhaust.com/Cobra-S1XR
Very good !!!
😈
After seeing this video I contacted the company here in the US and they told me they do not make parts for BMW ... such bullshit. I really want one
Hi,
Cobra USA does seem not to be connected with Cobra exhausts Germany where I bought mine from. Check out their Facebook page on this link: facebook.com/cobraexhaust/photos/a.10153839461278968.1073741856.321052378967/10153839461743968/
They are great to deal with.
Regards
Peter
Peter Watson thanks. I will contact them for sure
Hello,
Whats is the color configuration of this Cobra Hypershot exhaust, please ?
My Cobra order form looked like this:
Cobra Hypershots Ultrashort Prime Slip-on Road Legal/EEC/ABE homologated BMW S 1000XR x 1 403,32 €
mattbrushed tips x 1 0,00 €
stainless steel mattblack x 1 168,03 €
Cobra 2016 Laser Decal x 1 0,00 €
...and I trust you did not have to re-map after installation?
Correct. No re-map required given OEM headers, cat and exhaust butterfly valves remain in place.
I nearly bought one in 2017 but my legs were a bit too tucked up for my arthritic knees 🙁
I can't understand why they didn't follow the lines of the tail unit with the exhaust can either. They just don't seem to flow with each other. Not that my ramblings take anything away from what's possibly the best bike around at the moment tho 🤣👍👍
Hi, I’ve the same bike and want to fit the same exhaust, actually the only one looking nice on this bike. Can you confirm no drop in performances, with or without db killer? I think I’ll remove the db killer, though. Suggestions on where to buy it? Thx!!!
You'll love it! No performance drop. Feels and "sounds" like it's faster! Read the posts below and my replies for the full details on where to buy and the costs I paid. All the best Emiz.
Peter, I think I’ll buy it from the german website, maybe steel version that I’ll paint black (the black coat option costs too much!!!). Do you finally run it w/o db killer? Do u have any backfiring? Any problem of water into the muffler when it rains or washing the bike, given the ending inclination? Thx again!!!
If you run the bike in Rain or Road mode there are no pops, farts or crackles just a sport bike exhaust note But if you change to Dynamic Mode then you'll get a fantastic orchestra of exhaust sounds including exhaust pops, farts and crackles on deceleration. It's an addictive sound that all your riding mates will rave about. Awesome!
my friend where can i buy this????
You can shop for one from their Facebook site.
facebook.com/cobraexhaust/photos/a.10153839461278968.1073741856.321052378967/10153839461743968/
fit with s1000xr 20-22?
www.cobra-exhaust.com/Cobra-S1XR
Hi Peter, can you please assist me with how I can purchase these in Vic. I have the same bike as you. Cheers
hi peter
can you tell me how do you remove the db killers please
thank you
Just enough of a volume increase to make the bike nice and spicy and gets rid of that humongous stock can. If I'm gonna get this bike I'd probably run it with the baffle.
nice
Way better then sc project imo.
Contact Auri to order!
Hey Kevin,
you can place your order here:
www.cobraexhaust.de/Cobra-Hypershots-Ultrashort-Prime-Slip-on-road-legal-EEC-ABE-homologated-BMW-S-1000XR_2
THX
Auri Huesmann
Cobra Exhaust
yo guys,(and women)… get rid of the restrictors instantly , saving my life on a daily base
Bike looks beautiful. For the exhaust, this video says the dB killers are welded in. Is that right? How hard was it to take them out? ua-cam.com/video/jHClAMVMh9A/v-deo.html
They are held in by the screws around the pipe. Fiddly but easy to remove. Cheers Peter
الي عراقي بس متلي يشوف فيدوهات او ما يكدر يشتري لايك
More Cobra Exhaust products:
www.cobraexhaust.de/navi.php?k=2523&mf1=613
Für mich persönlich leider ein Fehlkauf. Sound finde ich bei meiner 2018er XR weder von der Lautstärke noch vom Klang her großartig anders als die Original-Tüte. Dazu kommt, dass nach Anbau das typische knallen bei Nutzung des Blippers und beim Gas wegnehmen ohne auszukuppeln komplett weg ist. In allen Modi. Dazu Cobra und Wunderlich (dort gekauft) angeschrieben zwecks Klärung = Null Reaktion bei beiden Firmen auch nach 2 Wochen. Bleibt für mich nur die deutlich bessere Optik gegenüber der Original-Tüte und nur dafür muss ich klar sagen, waren 700 Euro rausgeworfenes Geld. Wer sowas sucht -> gebe den Auspuff gern ab. Preis verhandeln wir.
Nuss a motoca já ta fumando... que merda em.
I have the same bike in the same colours; I’m gonna be fitting that exhaust; sounds excellent 👍👍👍👍
which year is that XR model?
I have the same bike in the same colours; I’m gonna be fitting that exhaust; sounds excellent 👍👍👍👍