⛐ Check out our Garage to see what tools we use and recommend: www.amazon.com/shop/worldmechanics ⛐ Subscribe and hit the notification bell by the subscribe button for new videos: ua-cam.com/channels/J9xpq0qUZevSEdBSFqO2ow.html ⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys
I just had new motor put in my 2016 Cruze run good for two weeks. When now it seems when it runs enough to get warm it don’t want go it to park and drive so I put the e brake on let cool down it when it all great fine to me I think the fluid low. I had the some thing happened to my G6 when replaced the radiator I hate these closed transmission
Great, Vid I have 2001 Nissan Maxima with 203k miles. Have check engine code P0744 TCC solenoid Intermittent. I changed fluid and put in Lucus and it was a lot better ( maybe 60% bettter) 300 miles later (maybe 75% better ) 600 miles later ( maybe 85% better) Fluid was very dirty and old Black/brown but did not smell burned No metal shavings either. The check engine like did come back (I had cleared it after the atf change) in 70 miles. Symptom of a dirty or failing TCC solenoid? On this car you don’t change a single solenoid you replace all shift solenoids At once. With repair kit. Transmission : RE4F04A Nissan Part No.: 31940-80X25 SOLENOID REPAIR KIT - CONTROL VALVE About. $77-120 part
My transmission starts to slip from gear 3rd to 4th and 5th to 6th. Other gears shifts smooth, i change fluid every 12k miles, it had being rebuild 2 years ago and i even have an atf cooler on. What could be the problem?
@@jasonmonkman272 Yes I did. It turns out that my car didn't like 87 octane gas. I use 93 octane now(paying 3.80 a gallon) and my car shifts very smoothly now.
Hi guys, what about a Cruze (Australia) 2010 Auto: The transmission will select gears perfect however the Gears seem to slip in selecting once moving and there is no Reverse it simply just sits basically, but it will slowly move in reverse... Cheers guys and keep up the Great Work you do.
I have a 2013 Chevy Cruze 1.8 with a automatic 6 speed transmission I'm getting a whining noise coming from the transmission I had a leak from the cooler line replaced them filled it back with fluid but still getting the whining sound is there something already damaged inside please help
Hi I got a 2012 2ltr turbo diesel auto cruze and I have removed and tested all 7 solenoids and test ok. What would make it work for a bit then neutralise. Thanks and your videos have been a massive help.
I have a 2012 Chevy cruze that when the transmission is hot struggles to shift into first and reverse. It doesn’t have issues when cold. And it doesn’t do it all the time but more often than not. Any ideas where I should start?
Hola tengo un Sonic 2012 automático el sensor de velocidad que está por fuera de la trasmisión está roto, y mi caja ya no entran los cambios crees que sea por el sensor
Nice video , congratulations . I have a problem . Can you help me ? I have a chevrolet cruze . Transmission replacemented. But it has fault code. P1751 ? How is it ?
Hi I have a 2013 Chevy Cruze 1.4 automatic some times when I’m driving and the car is going into 3rd gear it seems to stall or struggle to keep going , what can the problem be ?
This happens to me too. When im driving between 50mph and 70mph, it takes forever on that 3 rpm. It takes a while to shift. Most of the time it stays at 3000rpm even when I let go of the gas. Whats wrong with this, I feel like im going to mess up the transmission at the moment
My 2012 cruze started shifting hard into second. Now when going to second it goes to nuetral. If i let off gas it will catch and after going into 3rd the car drives fine. No lights on dash. Any help would be appreciated.
My Manual 2.0 has hard clutch? How to diagnose the problem? The mechanic says it need change of clutch plate, fly wheel renewal. Which could cost me a 1000 to 1200 bucks. The gear shifting is good, not the best. The braking is fine. Should I go ahead and look another mechanic to check for the Master hyd. Pump for clutch? Do suggest.
Hi there. I have a 2008 equinox with 110.000 kilometers on it. It stutters and somtimes shifts hard between 70-80 kilometers when holding the gas peddle at that point. But when stepping on the has hard l, it shifts and goes throughout all gears normally. What do you think it might be? Transmission,? Solenoid? Amor mechanics are saying it's gear hunting. Never heated of it before. Can you please advise it'll be greatly appreciated. Thank you in advance
Hi i have chevy cruze LT 2010 while changing the transmission its taking high rpm. I change already the spark plug and i changed also transmission fluid still the issue same.
I have 2018 cruze LT automatic. My car 6th gear not work. When my car 100km speed then rpm meter is on 3. Some time 6th gear working. Do you have any solutions?
Hello. I'm having a hard downshift from 4th to 3rd in my automatic 2009 Sonata. After about 5 to 10 minutes of driving it completely smooths out and goes back to normal. Any idea what might be the problem?
How many Kms Should I roughly be able to get on a full tank of gas for a 2011 Chevy Cruze? I’ve replaced the turbo and car has lots of power but I’m lucky if I can get 400kms on a tank of gas.
you say it is not expensive to get the solenoids changed i am having problems locating just a solenoid without replacing the whole valve body in my vauxhall insignia ? HELP if you know where to get them from i am in the UK
Hi. I have a 2011 cruze 1.6 petrol automatic transmission. The gears take up 4500rpm to shift the gear. I changed the oil was good for two days then back same problem and there is no torque like if you stop at the round about and try to go there is no power to go. Any idea.
my chevrolet in extremely hot days and after long drive once I stop in signal or try to take round about it not accelerate for 3 sec or less even I push pedal to end then it jump to speed what could that ?
(P0967 code )Chevrolet cruze ..clutch pressure control (pc)solenoid 2 control circuits high voltage. Problem please tell me solve this issue. And p2730 same solenoid valve 5. High voltage
@@Dicedaryn I couldn't get any information on it with out paying a mechanic to basically rebuild the tranny. But I hear the clutch plates are real weak points in the transmission. Then its opened up some plates just fall apart. I ended up selling the car for a loss.
I changed the transmission on a 2011, I've put a rebuilt unit but it won't show the manual shift function. Is there a concern other than they gave me the wrong transmission?
I replaced my fluid at 50,000 and it was too late damage was done and my transmission now shifts late and flares up. I’m still under warranty not sure if they’ll do anything about it. Rip
⛐ Check out our Garage to see what tools we use and recommend:
www.amazon.com/shop/worldmechanics
⛐ Subscribe and hit the notification bell by the subscribe button for new videos: ua-cam.com/channels/J9xpq0qUZevSEdBSFqO2ow.html
⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys
How do you clean solenoid? Have chevy sonic and can't find any for sale
I just had new motor put in my 2016 Cruze run good for two weeks. When now it seems when it runs enough to get warm it don’t want go it to park and drive so I put the e brake on let cool down it when it all great fine to me I think the fluid low. I had the some thing happened to my G6 when replaced the radiator I hate these closed transmission
Thanks for the information in the video however you do not have a link to the "valve body rebuild kit" in the video's description.
Great, Vid
I have 2001 Nissan Maxima with 203k miles. Have check engine code P0744
TCC solenoid Intermittent.
I changed fluid and put in Lucus and it was a lot better ( maybe 60% bettter)
300 miles later (maybe 75% better )
600 miles later ( maybe 85% better)
Fluid was very dirty and old
Black/brown but did not smell burned
No metal shavings either.
The check engine like did come back (I had cleared it after the atf change) in 70 miles.
Symptom of a dirty or failing TCC solenoid?
On this car you don’t change a single solenoid you replace all shift solenoids At once. With repair kit.
Transmission : RE4F04A
Nissan Part No.: 31940-80X25
SOLENOID REPAIR KIT - CONTROL VALVE
About. $77-120 part
My transmission starts to slip from gear 3rd to 4th and 5th to 6th. Other gears shifts smooth, i change fluid every 12k miles, it had being rebuild 2 years ago and i even have an atf cooler on. What could be the problem?
Could you make a video on how remove the transmission from start to finish?? Tips & tricks??
The transmission on my 2018 Cruze shifts so hard that it gives me headaches.
How many miles
@@edwinlewis1282 27k
@@markjou9799 Did you figure it out?
@@jasonmonkman272 Yes I did. It turns out that my car didn't like 87 octane gas. I use 93 octane now(paying 3.80 a gallon) and my car shifts very smoothly now.
Hi guys, what about a Cruze (Australia) 2010 Auto: The transmission will select gears perfect however the Gears seem to slip in selecting once moving and there is no Reverse it simply just sits basically, but it will slowly move in reverse... Cheers guys and keep up the Great Work you do.
Heyy what happened to your reverse did you figure it out?
I really appreciate this vedio it really did show me something on how to fix my Cruze thank you so much
I have a 2013 Chevy Cruze 1.8 with a automatic 6 speed transmission I'm getting a whining noise coming from the transmission I had a leak from the cooler line replaced them filled it back with fluid but still getting the whining sound is there something already damaged inside please help
Hi I got a 2012 2ltr turbo diesel auto cruze and I have removed and tested all 7 solenoids and test ok. What would make it work for a bit then neutralise. Thanks and your videos have been a massive help.
More important than ever to change the tranny fluid, even when owners are keeping their vehicles longer (it's a neglected service).
Hey there. Love your videos.. would you happen to have a video on how to drop and install a transmission for a 2013 sonic 1.8L??thank you in advance
I have a 2012 Chevy cruze that when the transmission is hot struggles to shift into first and reverse. It doesn’t have issues when cold. And it doesn’t do it all the time but more often than not. Any ideas where I should start?
Did you get a solution for it?
Hola tengo un Sonic 2012 automático el sensor de velocidad que está por fuera de la trasmisión está roto, y mi caja ya no entran los cambios crees que sea por el sensor
Nice video , congratulations . I have a problem . Can you help me ? I have a chevrolet cruze . Transmission replacemented. But it has fault code. P1751 ? How is it ?
Hi I have a 2013 Chevy Cruze 1.4 automatic some times when I’m driving and the car is going into 3rd gear it seems to stall or struggle to keep going , what can the problem be ?
i have the same problem, did you fix it?
You need to drain and refill the transmission fluid for some preventative maintenance good luck
This happens to me too. When im driving between 50mph and 70mph, it takes forever on that 3 rpm. It takes a while to shift. Most of the time it stays at 3000rpm even when I let go of the gas. Whats wrong with this, I feel like im going to mess up the transmission at the moment
The car ran better after replacing the lifters
My 2012 cruze started shifting hard into second. Now when going to second it goes to nuetral. If i let off gas it will catch and after going into 3rd the car drives fine. No lights on dash. Any help would be appreciated.
My Chevrolet Orlando has the same type of transmission (6T45), my question: can I remove the solenoids without removing the radiator? Thanks a lot
Videos are good my friend
My Chevrolet Cruze 1.6 automatic 2012 only drives in 1st gear, I changed the oil and all solenoids but still same. Can you please help
How do you test, diagnose the valve body?
Air compressor test
the link to rebuild the valve body where can i found it?
My Manual 2.0 has hard clutch? How to diagnose the problem? The mechanic says it need change of clutch plate, fly wheel renewal. Which could cost me a 1000 to 1200 bucks. The gear shifting is good, not the best. The braking is fine. Should I go ahead and look another mechanic to check for the Master hyd. Pump for clutch? Do suggest.
Are the transmissions the same in a Cruze diesel?
What would be the cause for reverse not to work and what is the cost to fix? Thanks!
Hi ..i have 2012 chevi cruze 1.8 where i find transmission number..?
Awesome explanations
Best video here
Hi there. I have a 2008 equinox with 110.000 kilometers on it. It stutters and somtimes shifts hard between 70-80 kilometers when holding the gas peddle at that point. But when stepping on the has hard l, it shifts and goes throughout all gears normally. What do you think it might be? Transmission,? Solenoid? Amor mechanics are saying it's gear hunting. Never heated of it before. Can you please advise it'll be greatly appreciated. Thank you in advance
I have the same issue with Chevy sonic did you ever find the issue?
if i replace my atf regularly, do i can avoid these problems? or it's going to happen anyway?
Thank you for sharing
Hi i have chevy cruze LT 2010 while changing the transmission its taking high rpm. I change already the spark plug and i changed also transmission fluid still the issue same.
If you change oil. Forget the gear unit. No one give assure after change.
I have 2018 cruze LT automatic. My car 6th gear not work. When my car 100km speed then rpm meter is on 3. Some time 6th gear working. Do you have any solutions?
Hello. I'm having a hard downshift from 4th to 3rd in my automatic 2009 Sonata. After about 5 to 10 minutes of driving it completely smooths out and goes back to normal. Any idea what might be the problem?
did you fix the problem? i have the same issue
how do you program the TCM 2011 Chevy Cruz 1.4L
How many Kms Should I roughly be able to get on a full tank of gas for a 2011 Chevy Cruze? I’ve replaced the turbo and car has lots of power but I’m lucky if I can get 400kms on a tank of gas.
you say it is not expensive to get the solenoids changed i am having problems locating just a solenoid without replacing the whole valve body in my vauxhall insignia ? HELP if you know where to get them from i am in the UK
So if I replace the transmission I would have to program it???
Hi. I have a 2011 cruze 1.6 petrol automatic transmission.
The gears take up 4500rpm to shift the gear.
I changed the oil was good for two days then back same problem and there is no torque like if you stop at the round about and try to go there is no power to go.
Any idea.
Transmission is slipping, clutches inside are worn out and causes to slip ver badly
Chevrolet Cruze 2012 1.8 manual transmission 6speed clutch kit what diameter
my chevrolet in extremely hot days and after long drive once I stop in signal or try to take round about it not accelerate for 3 sec or less even I push pedal to end then it jump to speed what could that ?
Hi. Did you ever solve this?
@@thisola transmission need rebuild i just sold
@@mohamedelmasry4452 Sigh. Thanks.
Hello, how did you tested your selenoids?
Thanks
Where is your video of how u change the solenoids
Hiiii Ali express Ac delco brand is it taken ?
what is the parts number for solenoid valve on sonic 1.4li hatchback ltz thanks..learned a lot from you!
(P0967 code )Chevrolet cruze ..clutch pressure control (pc)solenoid 2 control circuits high voltage. Problem please tell me solve this issue. And p2730 same solenoid valve 5. High voltage
Anyone lose the reverse after doing this procedure?
My reverse stopped working, what happened to yours?
@@Dicedaryn I couldn't get any information on it with out paying a mechanic to basically rebuild the tranny. But I hear the clutch plates are real weak points in the transmission. Then its opened up some plates just fall apart. I ended up selling the car for a loss.
Reason number 6 guys. Chevy Cruze transmissions are shite!
I changed the transmission on a 2011, I've put a rebuilt unit but it won't show the manual shift function. Is there a concern other than they gave me the wrong transmission?
Have you fix it ?
@@moviehouse8080 it was a programming problem. Needed the right programming.
Thanks
You da man
I replaced my fluid at 50,000 and it was too late damage was done and my transmission now shifts late and flares up. I’m still under warranty not sure if they’ll do anything about it. Rip
Ruben 2x OF COURSE they should do something about it you are under warranty. They better fix that sh*t.
Ruben, if you think they won't honor your warranty, then I think it's in your best interest to stop driving.
What damage?
my transmission is no good... -_-
Please tell me the issue solve
You don't need to program the transmission. What are you talking about.