Great video. I troubleshooted my generator and said to myself "That computer box must have taken a dump." After the generator sat in front of my shop for a while, I finally thought to myself, "I wonder if the voltage regulator is toast?" I found your video on Google, realized that's the box that I thought took a dump and suddenly realized that the generator was giving the same symptoms as one of our other generators that had the voltage regulator go bad. It was also awesome that you mention the hole in the frame to get the screw. I would have taken the regulator off had I known that was there. I have taken the top screw out like 3 times now and put it back in because I couldn't figure out how to get the bottom screw out. It's funny how some of the smartest people miss some of the simplest things. I found your company's voltage regulator on Amazon and have it on the way! Hope that I have this generator working soon. Thanks a lot for your help and for publishing this video.
thanks for the info. i have a Marquet 7000 model 7nhmfa26105f. the only way the engine continues to run is hold start button, but bad for starter. buying both control and voltage reg. may not fix the problem. saw another video that someone had a problem and mentioned your company helped him. what can i do to fix without buying unnecessary parts. hope you can help
Do yall offer carbs for onan emerald 1 gen set? My unit starts up and runs for about 10 seconds then dies. It will only do that once or twice then will not start again until it sits for awhile.
Well, this was the best/easiest to understand video out there!!!!
Great video. I troubleshooted my generator and said to myself "That computer box must have taken a dump." After the generator sat in front of my shop for a while, I finally thought to myself, "I wonder if the voltage regulator is toast?" I found your video on Google, realized that's the box that I thought took a dump and suddenly realized that the generator was giving the same symptoms as one of our other generators that had the voltage regulator go bad.
It was also awesome that you mention the hole in the frame to get the screw. I would have taken the regulator off had I known that was there. I have taken the top screw out like 3 times now and put it back in because I couldn't figure out how to get the bottom screw out. It's funny how some of the smartest people miss some of the simplest things.
I found your company's voltage regulator on Amazon and have it on the way! Hope that I have this generator working soon.
Thanks a lot for your help and for publishing this video.
i'm trying to convert my generator from two 120 volt leads to one 240 volt lead. do you know how to do that.
Onan generator 7000 only putting out 65 volts. Do you think it might be voltage reguator unit only? please Help me!
thanks for the info. i have a Marquet 7000 model 7nhmfa26105f. the only way the engine continues to run is hold start button, but bad for starter. buying both control and voltage reg. may not fix the problem. saw another video that someone had a problem and mentioned your company helped him. what can i do to fix without buying unnecessary parts. hope you can help
low oil pressure switch is bad
I have a marquis 5500 thàt shuts down after I let go the start switch ,how do I test what's the cause,please n thank you
Any troubleshooting of these devices?
What does the control board control?
Do yall offer carbs for onan emerald 1 gen set? My unit starts up and runs for about 10 seconds then dies. It will only do that once or twice then will not start again until it sits for awhile.
your voltage regulator is bad
@@Austin2276 thank you so much 🙏
What are the 2 black switches above the regulator for.
Those two switches are circuit breakers.
Which way should they be placed when trying to start the generator?
Got two white wires a green wire a black wire and black wire with a stripe
Good old Onan charging horrible prices, an older car voltage controller would cost 30 bucks and does the same thing for a quarter of the price
How do you hook that up?
Need videos on onan 7HGJAE - 2132 K series
I have a rotten egg smell coming from lp 6500 generator. Im desperately in need of guidance
I will
what