Killing Welding Method! ! Sanitary piping (Senitari)
Вставка
- Опубліковано 21 вер 2024
- Good morning. welder jin.
The theme of this video is welding and welding of Sunnytari pipes.
Have fun and subscribe.
It is a motivation to make a new video.
First of all, the tungsten rod should be sharp.
The arc is concentrated in one place so that Tech welding works well.
Ceramic nozzle is not important for Tech welding.
The voltage is 80 amps, so the heat is not transmitted to the opposite side when Tech welding.
Set with one touch.
Place the center of the short pipe gap.
Tungsten rods should be pulled out short.
As the tungsten angle approaches 0 °, the arc concentrates in one place.
The alignment will fit well.
It's the fundamentals of every pipe piteop.
Not right.
Clean up the cross section with diamond Yasuri
This time, let's correctly.
After all, it's better to stand up. (Gravity)
Let's observe
Note that if you do Tech welding at 6 o'clock, the next Tech welding position will be at 12 o'clock on the other side.
Do tech welding with zigzag because the pipe gap should not open.
It's like this.
Ceramic No. 6 Diameter (15mm)
Tungsten rod (2.4 pie)
Tungsten Rod Extrusion Length (5mm)
4 "We start welding Sunnytari.
Welding voltage was set to 80-90.
You should arc start and watch the molten pool.
Do not start weaving right away, but wait for the melt to melt and the backside beads to form.
Why not start at the first start point?
Did you solve the question?
We make a cabinet with regular weaving.
It was edited at twice the speed to get rid of boredom.
Please understand and watch.
Sunnytari welding is characterized by welding without solvent
It is a killer welding.
Because we do not give a root gap but
The molten water that makes the molten pool may have convex beads or concave beads under the pressure of purging.
The purge pressure welding process is very important.
If the purging pressure is strong, push it out
If the purging pressure is weak, it will be affected by gravity and sink at 12 o'clock and convex at 6 o'clock.
The reason for narrowing the width of the widget is butt welding without improvement, and there is no reason to widen it.
This is to increase the thermal conductivity.
It is a method of welding while maintaining the liquefied water delivered to the backside beads.
Since writing a lot of wrist Welding
It is desirable to perform welding with the least amount of force.
Also, there is a pipe gap during welding
It is very difficult to find a weld seam.
You will have to move your head often so that you don't miss the weld line and concentrate.
It is recommended to start 20mm behind when welding the other side.
Because it's a preheating concept, to make a natural connection with the backside beads that we created.
Look at the paper tape side.
The red light seemed naneunge.
It feels like a backside bead is created.
Let's observe
Thank you for watching.
Challenge with new welding video.
Subscribe.Like.Share
subscribe!!!
"welder jin"
/ @welderjin
Beugeum sources .....................................
HYP - Catch Me If You Can
Music by (HYP MUSIC)
• [BGM] 저작권 없는 신나는 피아노 음...
HYP - Eyes (eye)
Music by (HYP MUSIC)
• 무료 BGM 감성적인노래 HYP - E...
HYP-Monologue
Music by (HYP MUSIC)
• [BGM] 감성 저작권 없는 음악 | 비...
#Welding #Tig Welding #Sunnytari
통역!!! 번역의 문제가 심각해요. 6시 테크웰딩 후에 반대편 테크웰딩을 하라는 말인데 번역의 문제. 죄송해요.
써니타리 위생배관 1미리 해봤는데요 테크치기가 너무힘드네요. 너무얇아. 반전기에도녹는게 보이는데. 원터치 가능할까요.
1.65t일까예요. 나중에 테크치는 노하우 공개해볼게요.
ooo9oo9o
🤣🤣🤣🤣🤣
А толщина стенки трубы сколько мм?
대단하시네요... 시작위치가 자세가 엄청불편할텐대 이걸 논스톱으로 거의 끝부분까지 작업하시네요
제살용접은 말그대로 모제사이의 간격이 제로였을때 가능한거져 전압은 알맞게 알곤용접은 위빙과 전압을 잘맞춰야 용접이 잘됩니다 영상 잘봤습니다 저도 알곤용접사고 현재 알곤용접병행 일당직종사잡니다 늘 용접법 잘봅니다 경력이 있다하여 자만하지않고 배우고 또배우고 나보다 더나은 용접법이 있다면 이렇게도 저렇게도 열심히합니다 구독자분들도 영상만 보지마시고 실전에 하실때 유용하게 자기습성에 맞쳐 하시다보면 실력향상에 도움 많이됩니다 용접기술자들 화이팅~~~^^
Sim uma bela apresentação e nesse processo trabalhar com o tungstênio mais curto é uma boa opção e dependendo da espessura do material a regulagem da amperagem é fundamental para não oxidar tanto o tubo e a penetração varea com a velocidade que você conduzir a tocha no grau certo e a concentração na possa giratória de fusão parabéns uma boa apresentação 🇧🇷🙏
눈부시지말라고 매너손 너무 감동👍👍👍👏👏👏👏
Saya dari indonesia saya sangat senang dengan trik welding yang di berikan, saya seorang welder yang masih butuh belajar, bravo master
Japanese welder is known as among the best welders with the most professional welding technics in the world
ㅂㅅ 한국이겠지 어딜 듣보잡 일본을
Sim mestre sou do Brasil aprendi que uma vez que surgiu uma possa de fusão devo prosseguir com essa gota de mel giratória visualizando assim a emenda do tubo caminhando em frente mantendo o grau dá tocha protegendo meu cordão de solda em todo meu percurso obrigado você é muito bom lindo trabalho bela apresentação e filmagem 🙏
Dziękuję za napisy w języku polskim. Bardzo przyjemnie ogląda się twoje filmy.
Dziękuję za obejrzenie. Rzucę ci wyzwanie nowszym filmem.
That is a work of art. Outstanding skill ... Well done!
Браво мастер!! спасибо поучительно очень и все подробно расписал молоде!!! за камеру внутри чтобы видеть шов отдельное спасибо !!!!!
Вам любопытно, швы? Я вернусь с другим видео в будущем.
@@welderjin yes. ok!!!!
이거 보니까 알겠네요. 한국사람들은 정말 용접을 잘합니다. 이론적인 매뉴얼이나 이런거 없어도 도제식으로 내려온 노하우의 레벨이 틀려요.. 진짜루..
Inert Atmosphere Purge Cam! I was going to suggest this, and it already happened. This is pretty advanced thinking for welding videos. There are tiny inspection cameras now, I wanted to see one stuck into the purge chamber.... and there it is! With no gap and no filler, this is very demanding. This used to be called "Autogenous" welding, where there is only the base material and no filler. If a machine does this people say "Orbital Welding", which sounds more exciting than it is. Clearly what we're seeing here is orbital welding, but done by a craftsman instead of by a special device.
Thank you for good advice. Auto welding also exists in Korea, and orbital welding is underway in the world's No. 1 offshore plant. This video is about sanitary pipe welding-senitari, and there is a mistake because it is manual welding. Thank you for the advice.
Didn't know that Leonard, thanks for the explanation
@@welderjin I can't really advise you! I'm just talking about the terminology. Just making conversation you know? I really enjoyed this video, and might be able to attempt something like this... next year? If I stop drinking so much coffee. I'm definitely not saying that you should go BUY an Orbital Welder or anything!
i am just starting to learn! Now , this is what a professional welder welds like!
촬영 굳 용접기술 굳 화질 궅 촬영
다각도 굳 요즘 영상 올리는 분들
정성과 노력이 느껴 지네요 특수용덥 기능 자격증 받고 수년 동안 한번도
안해보니 뻥이지만 구경만 해도
재미 있네요 수고 많았습니다
워 너무 좋은 평을 주시네요. 더욱 분발할게요. 감사합니다😁
Ap ka continues bohat acha hota ha mujy bohat kuch sekhne ko mela ha
A agulha Um pouco Mais recuada A solda Fica com Mais Brilho. . . Mas Parabéns ferramenta Afiada 👍
자세한 설명 감사합니다^^
Great camera work. I'm just starting out with my everlast tig welder so everything is pretty new but I would like to start a career in welding.
What kind of Everlast do you have? I have the 210 EXT which I am very happy with. Everlast makes an affordable machine that is super reliable and easy to use. The only thing I would recommend doing is upgrading to a CK torch with a flexible head and maybe some larger cups from Furick or GLS Fab. They are not expensive and make a world of difference. Also If you are welding stainless, backpurging is a must. I have figured out how to make a really nice back purging setup for a very cheap price. Send me a private message if you want the details as I don't want everyone knowing my secret!
Can you please explain to me that tack welding method? I’m shocked on how easily you tacked it, I have nailed everything else down where I don’t get color inside the welds, penetration is perfect, and no birds eye. But my freaking tacks sometimes go through and sugar.
Gracias por el vídeo. Muy buena soldadura. Mañana intentaré hacer lo mismo a ver si me sale jejeje.. Todavía necesito experiencia. Me ha gustado mucho ver como hacía la soldadura esa persona.. A ver si en unos meses consigo hacerlo parecido :D ^^
안녕하세요^^ 저ㄴ 용접학원만 다니면서 용접을 배웠던 사람이고 실제 필기시험(용접/특수용접기능사)는 합격했는데 실기에서 둘 다 떨어져서요 다시 도전해 보려고 합니다 잘 보고 갑니다 더 좋은 영상 기대할게요^^ 감사합니다^^
화이팅😊 자격증과 실전은 크게 많이 달라요. 용접직종을 택했다면 하루빨리 취업하시길 바랄게요.
А сам способ у нас называли зигзаг ,после слыхал коброй ... А у Вас вроде : шитьё ,вышивание ... Но мне всё же больше понравилось " зигзаг " потому что глядя на зашитый шов прямо поверх шва был именно такой зигзаг или по Английски "ГАЛС" ...
Cobra. Метафора так хороша. Как зигзагообразные кобры танцует ... Спасибо. Ваша страсть к сварке удивительна.
@@welderjin такой тяжёлой горелкой, как перышком ведешь 👍👍👍, годы тренировок должны пройти, чтобы так делать...
다른 채널들보다 설명이나 비디오가 구체적이어서 너무 좋습니다^^ 많은 도움이 되네요~
Super vidéo. Pour ma part la porcelaine glisse sans arrêt. Pas évident
''''Diviértete y suscríbete...'''' -- dice... welder jin. No tienes idea lo mucho que me he divertido... hasta tuve un ataque de carcajadas... Mi familia se vió forzada a darme un sedante...
Tanto poder me dices. Me siento muy bien Volveré con un nuevo video.
Watched from Kansas USA. Great work. Great video. Thanks!
Kansas USA. Thank you
기가 막힙니다.
신의 경지 입니다.
헐 그정도까지는 아니구요. 감사합니다.
Most beautiful weld.
Great job jin. . Thanks For tips. . . Saluttttttttttt from WELDER 🇮🇩🔥🇮🇩❤️
Can you speak english? Very different from American the welding method, more simple, more exact, very uniform clean like result, I liked your result very much, thank you Welder Jin!
I can't speak English. I know a simpler welding method. Please remember that the video is manual welding. Auto welding? Pulse welding? no. Welding varies depending on the situation.
@@welderjin , gracias
Good welder I try to study about it
Is it common to walk the cup on 16 gauge tubing like in this video in other parts of the world? Sure the weld looks nice but i wonder how much shrinkage there was in the overall length of the pipe. I've purge welded miles of pipe in my life but never did it this way....I do possibly see a benefit on thicker gauge stuff though like 1/8 inch wall and such....Maybe I'll give this technique a try and see how it goes. A guy can never have enough welding knowledge or techniques in his bag of tricks...
Sorry for late comment,would you explain why haven't you used a filler rode?
You should put that pipe on the roller and no need to go under and above and all kind off direction.
상세한 노하우 영상으로 공급해 주셔서 감사니다...
Magnifque soudure, les gros plan intérieur sont formidable ! Félicitations
Hola muchachos,les escribo de España, tengo una pregunta técnica,cuanto caudal de purga y cuánto tiempo debo esperar para comenzar a soldar tubería de inox de 3" en una línea de 6 tubos, gracias.
No sé cómo vamos hacer al final,tenemos que ponernos en contacto me mola mucho tu pantalla de soldar,estoy comprando mucho en China no creo que es muy difícil comprarte una pantalla gracias
The camera shot you took from the inside was awesome🤙🏽
Have a nice day.
@@welderjin olympiens knwes
I love watching precisious asian welders at work!
That's fucking racist.
¿Cuál es la manera para calcular la presión de purga? Saludos desde México
Nice to hear from you thanks
Джин,ты молодец очень хорошо вариш есть чему поучится у тебя.Удачи в работе!!!
Спасибо за просмотр
Nice welding job. Pipe welding with urgon purging.
Increíble eso sí es un soldadura muchas gracias por tu vídeo
Very good bit i prefer pulsweld same resultat faster.
안녕하세요 구독 좋아요 꾹꾹 누르고 시청하고 있습니다
저는사실 만드는걸 좋아해서 용접과 특수용접을 배웠는데 박판 용접을 배우려고 했는데 어쩌다 용접기능사 특수용접 기능사 자격증도 취득을 했지만 기술은 박판용접 인것 같습니다
퍼지를 해서 용접후 빠우 까지도 하는영상 보여 주셨으면 좋겠습니다
스텐파이프 몇티를 사용 하시며 전류는 얼마로 하는지요 알려주시면 감사하겠습니다
좋은영상 감사드립니다
선생님 채널도 번창하세요
6호는 거의 10mm 정도인데요.. 자막은 15mm로 나오네요. 보통 내경을 얘기하죠. 외경이 아닌.
Nie konidentem takim że w biurze przy wypłacie sprzedaje tylko Ja przy nich normalnie zdjęcia robię i dzwonię że jest problem ze spawaczami 😁😁😁
잘~찍었어요..구욷 영상 ~이네요
Nicely done. I really liked the camera inside the pipe showing the welding from the inside!
I prefer a rotary table , I can rest my torch at a fixed point and the the work rotate to me.
This video shows how to weld when there is no rotating table.
Dear Jin! Is it a MIG welder? Very beautiful work!
TIG
Is for food grade piping? If yes the inside beed should be smooth and flat so it can be washed out after use so no food get stuck to the inside beed. Just set a tight gap make standard weld with Argon purge. Pipe needs to be very clean to start.
Gas plumbing. gn2, pn2, liquefied nitrogen tubes.
자세한 설명과 선명한 영상으로 이해가 쉬웠습니다. 감사합니다! '좋아요', '구독'
감사합니다 새로운영상으로 다가갈게요.😊
용접하는게 아니라 예술가시네요
Root looks awesome.
Have a nice day.
Nice but you should give the wire from above.The cap is hollow.
норм)) мне понравилась подготовка и процесс сварки с поддувом.!)) но очень тяжело катать восьмерку не имея навыков. тем более так часто катать, и если бы я оценивал шов то поставил среднюю оценку так как обратный валик не получился как шов с катетом, а вышел вогнутый... ну это мое мнение что обратный должен иметь катет.... так что ребята, эта работа на твердую четверку по пятибальной)))) но в целом хорошо)))
I just started professionnally learning welding (stick, mag/mig, tig) . This is impressive !
Waw...cara pengelasan nya sangat bagus 👍👍👍🤝 indonesia 🇮🇩
Молодец! Очень качественная сварка! Вопрос - может горелку больше поставить, чтобы шов снаружи не был таким чёрным?
Это верно. Это хороший момент. Так работает сантехническая сварка труб в Корее.
선생님 좋은교육감사합니다
댓글 감사합니다😊
Hola
Cuantos kilos de gas purga lo as puesto ???
Gracias y saludos
Nice my friend. Good job!! Take care always!❤️
This is a kind of expensive way to keep shield gas. Another way I saw people do, is leave the butts a small clearance of about .5mm, so the inert gas can go through the over side.
But during welding this piece pipe.. I'm using 35amp.. Correct me if I'm wrong.. With purge also
Nice work Jin.
By the way, what make or brand name and model number of your tig welding machine.
Thank you very much, Barry
Love the video you are very talented man keep more videos to come thanks
Стесняюсь спросить - в чём убойность данного метода сварки?
Sseni Тари. Санитарный трубопровод Нет сварочных материалов. Правильного ответа на сварку нет. Я прошу прощения за трудности в переводе.
Дрочево не оправдованное!
Tig 6g
Залупа. Простой сваркой за 30 секунд заварить можно
Да тут я посмотрю одни профи блять собрались
멋지다..ㅜ
저도 빨리 진님처럼 a급용접사되고싶습니다
it is hard to find smooth step at pipe contact line in free state because pipe has an error/tolerance. except that contact line is generated from splitting 1 piece into 2 pieces
Thank you. Good advice.
самое крутое в этом видео это перевод, продраться сквозь мусор из не связанных между собой слов чтоб найти смысл это реально подвиг! )))
우와 이렇게도 되는군요 감사합니다 처음 알았네요
Very high attention to detail! Excellent job!
Have a nice day.
Buen trabajo!!! Yo hago menos movimiento pero avanzo mucho más a cada paso
Gracias Que tengas un buen día.
Cuanto kilos de purga se pone y con cuantos amperios se suelda ??
Saludos.
Gostaria que vc explicasse neste video de vcs quanto de amperagem vcs usou e a pressão do argonio se foi 8kilos de pressao ou 10 kilos de pressão ou bar
Mais um brasileiro interessado no assunto!! Tmj.
gracias por el tiempo y video, ahora podrás hacer un vídeo con soldadura en aluminio con arco pulsado?? gracias
라인이 너무 잘맞으면 용접시 길을 잃을 위험이 높아집니다
역시 최고네요
과찬이세요. 감사합니다. 소중한댓글😘
Absolutely cooked the weld. It is very very bad to have your stainless weld look that color.
Thank you for the advice.
Thats great ......
Iran has a lot of welders like this .
Thank you. Have a nice day.
Bạn có thể chia sẽ một vi deo hàn tig nhìn qua gương được không.? Xin cảm ơn nhiều.
Buatkan saya video trick mengelas plate satenless 0,8/1,0 mm, sudah saya coba berulang kali tapi gagal terus ..terimakasih
ASASUKA ngak di respon sama japan chanel ya,mungkin jarak kampuhnya tidak rapat ,atau harus di bantu dgn kawat tambahan,
Ficou Incrível muito bom 👍👍👍👏👏👏👏👏
기술이 좋으십니다 ^^ 엄청난 내공이군요
Good job from indonesia👍👍👍
Why do I have to wait 6 hours between first and second weld. Is it to cool down
I was taught by great tig welder who worked at food grade manufacturing company
Our welds left a golden bead on both sides perfect bead inside and out
The center turns black because it is overheating the weld
We leave a slight gap between 2 pieces
Using filler rod gold bead with blue edge on each side of the bead
Thank you. We have filmed a welding method, and this welding method also exists in Korea.
The color of a weld on stainless has everything to do with heat and speed. We never use filler on sanitary. We fuse it and it welds inside and out. This is what makes it "sanitary". There are no crevices inside like a root with filler rod for bacteria to grow.
좋은 영상 감사합니다 ㅎㅎ 😂 💕
Not bad for a beginner, just keep practicing and someday you will get there.....
That deep purple color is a fail in the us. Won't that rust. We go for the gold color, or light rainbow's.
멋집니다....좋은 정보 기술.감사 합니다.
Dẹp
The best gan. 👍
Лайк конечно за профессионализм, но почему бы просто не взять такой кусок трубы как эти два и ни мучиться. Это всётаки дорогой вид сварки, не?
Тонкая труба с тонкой тиковостью. Это метод сварки, который устраняет недостатки невозможности расплавления растворителя.
Неужели ты настолько тупой что не понимаешь что это типа обучающее видео.
so great i really like it brother
Mantulll,sy dulu jg welder gtaw,klu liat org lg ngelas naluri sy lsg keluarrrr biasa..
This is what I do for a living. Food grade sanitary welding.
Very skilled welder, well done.