Two things this week. We know there is not enough Pascale in the episode and I did grizzle about it, but with the refit in crazy mode for about a month, only one of us was able to focus on film-making and things will return to normal. Also, yes, the hatch slide rails are different lengths. That's not some bizarre innovation, just an improvisation using existing holes till we decide on the final position. Again, sorry if we don't answer as many questions as we would like but things are HECTIC. T
2 things I never go to work with out in my tool bags a good sharp 1" chisel and a little pocket plane , both are essential and getting that custom-made look in the corners of finish work and I keep some Elmer's wood glue for the corners of trim work handy
Free Range Sailing sets the standard on youtube for all would be Sea Nomads. Calm, considered, resourceful its like you where were born to the sea. I have enjoyed every episode thank you for sharing your story.
Do you guys know about cabinet scrapers? Basically a piece of steel that you put a bur on the edge of, sort of like the bur that is raised when you sharpen a chisel or something. Anyway, they are neat because you can press hard, and they remove about as much wood as a low angle block plane, or you can press lightly and they are like 400-600 grit sandpaper, but they make a shaving rather than sawdust like sandpaper, so less mess. They work real slick for squirrelly grain wood used in boat trim, like mahogany, and they just get sharpened like a chisel, so no sandpaper to go in the bin when you are done, which seems like it might fit with your guys style, with caring about your waste volume. As an added bonus, they are easier for a less experienced person to use than a plane, where you have to kind of understand grain direction and things. Great channel, keep it up.
Your innovation in re-using and restoring old bits of other boats is exemplary . For many years , back In England , I bought , restored , and sold old English fibreglass cars working on the same principle . I became a mechanic , a fibreglass expert, a paint sprayer , a scrounger extraordinaire of bits no-one else wanted , and then an internet cruiser to find those bits that couldn't be found anywhere else . You , Troy, with your woodworking expertise and reluctance to buy when you can repurpose follow the same route . It's a joy to watch :)
Man I love the channel and your work. I'm a craftsman myself. I had a blade snap on my bandsaw the other day. Without the push stick I'd not be typing this right now I reckon. The older you get the more you worry about limbs dropping off. Maybe we should both invest in some kevlar gloves! Take care and be lucky
Wow! Just like one of those sci-fi shows where the outside of the spaceship is tiny but the inside is huge! This workshop must be adjacent to the engine room on Mirrool. Very well hidden up until now. Cool! 😁
Its really quite amazing how Troy can bring the most mundane repairs up to a whole new level. Well done to the both of you as the camera work is excellent as well Pascale!
I wonder if people realize that in twenty years you guys could be the Lin and Larry Pardey of sailing because of your experiences with how to provision how to live on a sailboat and how to maintain a sailboat, not just own a sailboat and go someplace. The experience the two of you have is very entertaining but you are so much more than just an entertaining couple who are on a sailboat!
This one is for Troy Water catcher what you need 1 golf umbrella I plastic paint kettle 1 hose fitting,. Open umbrella then with a soldering iron make holes close to the shaft. Then drill hole in paint kettle for hose fitting. The water will run down the Spike into the kettle it is so simple and it really does work. It takes 5 seconds to set up and the same to Stow. I used this on me Contessa 26 and used to set it up in the cockpit. Try it Regards
When you find a palm plane, like the one touted in this episode, with a 'spoon' on the back to fit in your palm, BUY IT. I carried one in my carpentry bags for a career. They work great for sharpening pencils too.
I spent most of the time drooling over the stuff in the shed. All neatly organised - a place for everything and everything in it's place . I now have a serious case of shed envy!!!!
Holy shit! You my friend are a true craftsman! There is an old saying here in the US, "Jack of all trades and master of none" . You however seem to be master of many and damned competent in the rest! Hats off to you both! Keep on doing what you do! And thanks.
Awesome job! Your rebuild is starting to feel like Sail Life. Mads has been refitting a 38 Warrior for many years. You could pick up some tips from there. Your hatch looks very spiffy! And you both look very happy working together
In the States we call your palm plane a block plane. It is indeed almost indispensable for sneaking up on the final fit. As to Pascale being behind as opposed to in front of the camera, she's not totally absent. We can hear her from time to time. As a pair you complement each other very well. Nice teamwork, good vibe. We can wait for you to tweak things to your liking as long as you keep us in the loop. Thanks! Can't wait until I again wish you fair winds.
Love your videos! They are such a great escape from grinding out the hours behind a computer screen. Make me long for the tools and something to restore.
It's always a pleasure to watch skilled craftsmanship in action. The only provisioning I need is a Pascale and enough money to buy her anything she needs.
Looking fantastic! Will be super to see if faired, painted and a part of the final companion way. Some smart woodworking skills there Troy. Those delicate fits are certainly what make it!
Its very gratifying to finally be able to restore the old boat after years of planning to do it. We couldn't have done it without you guys and the support you have given us.
Hi, slot-headed screws are used a lot on boats as in case epoxy or gelcoat goes into the slot, you can still clean the slot if needed - while in case of a phillips head, you are screwed. :)
I don't like Phillips because they bugger too easily if a bit of dirt gets in the bottom or the screw is cheap soft metal ("cam out") or you drive them with a driver that's been worn down. Those two conditions make each other worse. There are subtly different shape drivers that slip less (buy as tips for drills, Bosch, DeWalt). (btw get a hand screwdriver into which you stick any size type screwdriver bit, and buy a set of bits all types. Also made w flexible shafts. I like hex and square and Torx but they have the problem of you not having the driver tool type & size when you need it. At least Philips are universally available. Last resort drill out old screw or frustration use giant hammer. Everybody carries assortments of spare nuts bolts screws eh? Sheesh! Rather be sailing!
The packing tape tip was so timely. I am refurbishing my companionway and need to fill a rotted board with epoxy. I will let you know tomorrow if it worked.
Cheers 🍻 Well hatched guys. ! Great use of machine screw plugs. Did I see an embossed Clansman thistle on the hatch ? Cool logo. Really such a treat to watch this refit and no doubt you will reap well deserved rewards from the effort and care. I’m thinking the Plan must be the dodger !? Good luck with that.
You guys are doing such a great job. I'm impressed and trust me it takes alot to impress me. Can't wait to see you next week and see what else you're doing! Much love.
Hello from a sunny Sydney. I'm learning some great woodworking lessons from you...I love how you'll attempt to replicate (and improve on it). So thx for the great content. Where about in Tassie are you bunkered down? Stay safe and healthy. Cheers
Thanks Troy & Pascale for the detailed look at all the bits that go into making a sliding hatch and cover.. (not that I plan building one for my boat.. they're the work of the devil! Heh. But I did still learn some useful tips from it. So much appreciated!)
Great video to explain the workings of a companion way hatch. You've got me a bit concerned. You didn't mention that pretty piece of wood that is at the top of the companion way. It not only looks like a sharp edge but it looks like it's actually slanted out where it will be a real ouch if you hit it.
50 years from now that hatch and sliders will still be in better shape than it was when you started the video. You did a much better job than the original builders did. I can't wait to see how you refurbish or rebuild the dodger and if you add in a bimini and maybe a removable connector to it. Maybe you might even add sides for a more complete enclosure. I'm just guessing though. Our Hallberg-Rassy Rasmus has glass window dodgers like all HR models, but has a soft removable top to the windows. A hard top would be nice too, but at least the fabric is Stamoid "Open," their top of the line reinforced vinyl fabric which is much more durable, UV, water and mold resistant. You guys are getting so much more done during your COVID layup than we are. Stop making us look bad ;)
I learned the art of replicating wooden pieces years ago, while helping restore a Hampton 18, once the owner was done, we took it out for a beautiful afternoon of sailing
BTW. Anybody around Sydney area looking for a Clansman for them self, check out sail boats on Gumtree. I’m sadly not in the market for one, but our dear Free Range’s make it attractive and do-able. Cheers ⛵️
Seems like weeks between your videos but I know its not really. I enjoy these very much I am getting a boat next month and always like to see what others are doing.
Hi. Left a comment on adifferent episode (if you have a episode when building the dodger), but also wonder how big your Genoa is, 135, 150????. My is a 28 fot. Fair winds, Runar, NORWAY.
You just reminded me I need to trip over to the local lumber shop too have 4 2x8's trued(they were found on property leftovers and lightly water warped) for a monitor stand project I am envisioning and need a 5th one cut too....Just out of curiosity, how much 'bubble gum and bailing wire' did you uncover(yikes!!!!)????
quick question, although I am sure you have plenty so don't worry if you can't answer. Was a hinged companionway with Perspex considered or is that not viable in hot climates where you are? Also curious why you plane the wood so much rather than sanding the ship itself for straight edges. Ta and best wishes.
Some people use the thumbs down system as a lazy way to say 'stop recommending videos like this to me' (there is actually a proper way to do that). Also, some people use bots to add more thumbs ups to their own videos. So that they don't get caught doing this, the bots also randomly give thumbs up and thumbs down votes to other people's videos as well. And then there are some who've been blocked for posting inappropriate comments, who then proceed to give a thumbs down to every subsequent video that comes out. FRS has a few of those. Seems like a lot of wasted effort to me, but I guess some sad types really like holding on to their grudges.
Two things this week. We know there is not enough Pascale in the episode and I did grizzle about it, but with the refit in crazy mode for about a month, only one of us was able to focus on film-making and things will return to normal.
Also, yes, the hatch slide rails are different lengths. That's not some bizarre innovation, just an improvisation using existing holes till we decide on the final position. Again, sorry if we don't answer as many questions as we would like but things are HECTIC.
T
Definately not enough Pascale!.......
2 things I never go to work with out in my tool bags a good sharp 1" chisel and a little pocket plane , both are essential and getting that custom-made look in the corners of finish work and I keep some Elmer's wood glue for the corners of trim work handy
Free Range Sailing sets the standard on youtube for all would be Sea Nomads. Calm, considered, resourceful its like you where were born to the sea.
I have enjoyed every episode thank you for sharing your story.
Do you guys know about cabinet scrapers? Basically a piece of steel that you put a bur on the edge of, sort of like the bur that is raised when you sharpen a chisel or something. Anyway, they are neat because you can press hard, and they remove about as much wood as a low angle block plane, or you can press lightly and they are like 400-600 grit sandpaper, but they make a shaving rather than sawdust like sandpaper, so less mess. They work real slick for squirrelly grain wood used in boat trim, like mahogany, and they just get sharpened like a chisel, so no sandpaper to go in the bin when you are done, which seems like it might fit with your guys style, with caring about your waste volume. As an added bonus, they are easier for a less experienced person to use than a plane, where you have to kind of understand grain direction and things. Great channel, keep it up.
Your innovation in re-using and restoring old bits of other boats is exemplary . For many years , back In England , I bought , restored , and sold old English fibreglass cars working on the same principle . I became a mechanic , a fibreglass expert, a paint sprayer , a scrounger extraordinaire of bits no-one else wanted , and then an internet cruiser to find those bits that couldn't be found anywhere else . You , Troy, with your woodworking expertise and reluctance to buy when you can repurpose follow the same route . It's a joy to watch :)
Man I love the channel and your work. I'm a craftsman myself. I had a blade snap on my bandsaw the other day. Without the push stick I'd not be typing this right now I reckon. The older you get the more you worry about limbs dropping off. Maybe we should both invest in some kevlar gloves! Take care and be lucky
Wow! Just like one of those sci-fi shows where the outside of the spaceship is tiny but the inside is huge! This workshop must be adjacent to the engine room on Mirrool. Very well hidden up until now. Cool! 😁
Its really quite amazing how Troy can bring the most mundane repairs up to a whole new level. Well done to the both of you as the camera work is excellent as well Pascale!
Hopefully not a whole new level of mundane! Thanks as always Tim from the two (three) of us.
@@FreeRangeLiving 3 of us? was the goal keeper on holiday?
@@FreeRangeLiving lol x a bazillion or so ;-)
@@brucemcdougall8920 I'm re-watching, maybe they meant Mirool as the 3rd? ;-)
I wonder if people realize that in twenty years you guys could be the Lin and Larry Pardey of sailing because of your experiences with how to provision how to live on a sailboat and how to maintain a sailboat, not just own a sailboat and go someplace. The experience the two of you have is very entertaining but you are so much more than just an entertaining couple who are on a sailboat!
Love this channel from NZ
This one is for Troy
Water catcher what you need 1 golf umbrella I plastic paint kettle 1 hose fitting,. Open umbrella then with a soldering iron make holes close to the shaft. Then drill hole in paint kettle for hose fitting. The water will run down the Spike into the kettle it is so simple and it really does work. It takes 5 seconds to set up and the same to Stow. I used this on me Contessa 26 and used to set it up in the cockpit. Try it
Regards
OMG......thumb in a bum......I thought I was the only one.......Troy.......you have a fan for life!!!
When you find a palm plane, like the one touted in this episode, with a 'spoon' on the back to fit in your palm, BUY IT. I carried one in my carpentry bags for a career. They work great for sharpening pencils too.
Thanks for the video! It quite enjoyable watching a master craftsman in his element! She'll be better than new when your finished!
When you're all finished and the world sorts it self out
Are you going to sail across the ditch and visit NZ??
Did you just say "like a thumb in a bum"
Gold :)
I spent most of the time drooling over the stuff in the shed. All neatly organised - a place for everything and everything in it's place . I now have a serious case of shed envy!!!!
Me too. I have never seen a wood workshop outfitted so comprehensively! Green with envy !!
Nice job you two are going to be pros once all done can't wait to see the finished product! 😉😁👍
Holy shit! You my friend are a true craftsman! There is an old saying here in the US, "Jack of all trades and master of none" . You however seem to be master of many and damned competent in the rest!
Hats off to you both! Keep on doing what you do! And thanks.
Great work..Troy.....I wish I could sail with you guys in Mirool one day in future!
Awesome job! Your rebuild is starting to feel like Sail Life. Mads has been refitting a 38 Warrior for many years. You could pick up some tips from there. Your hatch looks very spiffy! And you both look very happy working together
again a VERY good Video - many thanks - my best regards
In the States we call your palm plane a block plane. It is indeed almost indispensable for sneaking up on the final fit. As to Pascale being behind as opposed to in front of the camera, she's not totally absent. We can hear her from time to time. As a pair you complement each other very well. Nice teamwork, good vibe. We can wait for you to tweak things to your liking as long as you keep us in the loop. Thanks! Can't wait until I again wish you fair winds.
Can't wait for the new hard dodger design (and material)!
Love your videos! They are such a great escape from grinding out the hours behind a computer screen. Make me long for the tools and something to restore.
Its really looking good.
It's always a pleasure to watch skilled craftsmanship in action. The only provisioning I need is a Pascale and enough money to buy her anything she needs.
I adore you both. Both so intelligent ppl. Thanks for teaching,sharing an basically being who you both are always! Love y'all thanks so much!❤💪😊⛵🌞🌐❗
You are probebly almost ready but there is a product called accoya and Tricoya those are super to use in wet situationeel. They wont decay or rot@
The chisel cut tongue depressor. Golden.
Looking fantastic! Will be super to see if faired, painted and a part of the final companion way. Some smart woodworking skills there Troy. Those delicate fits are certainly what make it!
Its very gratifying to finally be able to restore the old boat after years of planning to do it. We couldn't have done it without you guys and the support you have given us.
I like Pascale's confidence in your abilities.
Some very well done woodworking Troy. Nice work on the sliding hatch cover. Looking smarter with every episode.
nice 1, thumbs up. keep up the good work, stay safe an well eh!
Hi, slot-headed screws are used a lot on boats as in case epoxy or gelcoat goes into the slot, you can still clean the slot if needed - while in case of a phillips head, you are screwed. :)
I don't like Phillips because they bugger too easily if a bit of dirt gets in the bottom or the screw is cheap soft metal ("cam out") or you drive them with a driver that's been worn down. Those two conditions make each other worse. There are subtly different shape drivers that slip less (buy as tips for drills, Bosch, DeWalt). (btw get a hand screwdriver into which you stick any size type screwdriver bit, and buy a set of bits all types. Also made w flexible shafts.
I like hex and square and Torx but they have the problem of you not having the driver tool type & size when you need it. At least Philips are universally available. Last resort drill out old screw or frustration use giant hammer.
Everybody carries assortments of spare nuts bolts screws eh?
Sheesh! Rather be sailing!
The packing tape tip was so timely. I am refurbishing my companionway and need to fill a rotted board with epoxy. I will let you know tomorrow if it worked.
Cheers 🍻 Well hatched guys. ! Great use of machine screw plugs. Did I see an embossed Clansman thistle on the hatch ? Cool logo. Really such a treat to watch this refit and no doubt you will reap well deserved rewards from the effort and care. I’m thinking the Plan must be the dodger !? Good luck with that.
So, you hatched a plan, planned a hatch and executed the plan without killing the hatch. Great job!
Great video!!! Are you sure your not a carpenter? Beautiful wood work! Thanks for sharing!
I love it how you re-purpose as much stuff as you can :)
Are you guy's still at Kettering Marina and when are you meeting the public in Hobart
Aye m8’s, It's all coming out nicely. And I liked the way of using the bandsaw, turning the table, like a shipsaw!
Having access to such a well appointed workshop is an absolute gift, for which we are very grateful. Makes things very easy.
That boat is going to be practically brand when you're done with it, can't wait to see the finished product!!!👍
Nice video thanks
Great job guys!
A trim layer around the windows would really put the finishing touch on her!
You guys are doing an awesome job on the refurb...
Very nice work on the hatch.Looking forward to seeing the final results....
Do you put your chisel edges to a whetstone Troy?
One of my grandpa's always did his on one with what he called "neatsfoot oil".
Another GREAT video. Really informative, as usual!! Thanks. Cheers 🌹🌹🍷🍷🍷
Well done!! Bring on the next one!
You guys are doing such a great job. I'm impressed and trust me it takes alot to impress me. Can't wait to see you next week and see what else you're doing! Much love.
Hello from a sunny Sydney. I'm learning some great woodworking lessons from you...I love how you'll attempt to replicate (and improve on it). So thx for the great content. Where about in Tassie are you bunkered down? Stay safe and healthy. Cheers
AS Always BEAUTIFUL Workmanship
Thanks Troy & Pascale for the detailed look at all the bits that go into making a sliding hatch and cover.. (not that I plan building one for my boat.. they're the work of the devil! Heh. But I did still learn some useful tips from it. So much appreciated!)
Thank you guys for this and all your amazing films so far...
Great video to explain the workings of a companion way hatch. You've got me a bit concerned. You didn't mention that pretty piece of wood that is at the top of the companion way. It not only looks like a sharp edge but it looks like it's actually slanted out where it will be a real ouch if you hit it.
Ok this is video number 28 of my "I want to buy a Free Range Sailing hoody" campaign
Cheers
Matt
..."In Theory"... Words heard around the world in every shop..
Hey Troy! is there thing you can’t do , Pascy is a lucky mate.
Nice work.
Excellent as usual!!!
“Like a thumb in a bum”!!!
It's a Block plane usually bevelled at 22 deg. and can plane end grain as well!
Great job on the boat and the video's, don't have to see it all to know it's being done right!
Have a great day!!
What a Bonza work shop! Cheers Gray
Logan river Gold Coast
50 years from now that hatch and sliders will still be in better shape than it was when you started the video. You did a much better job than the original builders did.
I can't wait to see how you refurbish or rebuild the dodger and if you add in a bimini and maybe a removable connector to it. Maybe you might even add sides for a more complete enclosure. I'm just guessing though.
Our Hallberg-Rassy Rasmus has glass window dodgers like all HR models, but has a soft removable top to the windows. A hard top would be nice too, but at least the fabric is Stamoid "Open," their top of the line reinforced vinyl fabric which is much more durable, UV, water and mold resistant.
You guys are getting so much more done during your COVID layup than we are. Stop making us look bad ;)
Hey Troy that gauge is great .However there is phone apps Ive used .That work really well Too
Oh the boat looks so good without the dodger. I’m a minimalist though.
Great stuff guys!
I learned the art of replicating wooden pieces years ago, while helping restore a Hampton 18, once the owner was done, we took it out for a beautiful afternoon of sailing
Very nice work. Neat!!
BTW. Anybody around Sydney area looking for a Clansman for them self, check out sail boats on Gumtree. I’m sadly not in the market for one, but our dear Free Range’s make it attractive and do-able. Cheers ⛵️
The different length rails make it easier to get started on, I would think, as well.
Yes.. I noticed that too.. and had the very same thought.
heya oh wouw the out side is olso gone be dane nice
Seems like weeks between your videos but I know its not really. I enjoy these very much I am getting a boat next month and always like to see what others are doing.
Great video again guys.
In case I misheard, what wood did you use for the hatch combings?
moral support is always appreciated.
Hi. Left a comment on adifferent episode (if you have a episode when building the dodger), but also wonder how big your Genoa is, 135, 150????. My is a 28 fot. Fair winds, Runar, NORWAY.
We are filming rebuilding our dodger now and the Genny is 130
Hi. Wow did you ever make me happy😊. Love the channel. Thanks
Just became your 405 Patreon👍.
Great, welcome aboard! We answer any questions from our Patrons on the Patreon site so let us know if we can help out with anything at all.
You just reminded me I need to trip over to the local lumber shop too have 4 2x8's trued(they were found on property leftovers and lightly water warped) for a monitor stand project I am envisioning and need a 5th one cut too....Just out of curiosity, how much 'bubble gum and bailing wire' did you uncover(yikes!!!!)????
quick question, although I am sure you have plenty so don't worry if you can't answer. Was a hinged companionway with Perspex considered or is that not viable in hot climates where you are? Also curious why you plane the wood so much rather than sanding the ship itself for straight edges. Ta and best wishes.
Very cool! I am a subscriber from Karelia. What wood did you make these elements from?
I guess you will have to take Mirrool to BC, since you will never be able to part from her, with so much beautifull work and soul invested.
@@marengtech313 British Columbia
@@marengtech313 They said, BC would be an area they may cruise one day in the future.
Engineering wizardry!
One down vote from the Slot Head Screw Manufacturers Association.
Great job still being able to use the rotting wood as template
What program do you use for video editing?
Slot head screws are the devils work!
Troy is looking like Abraham Lincoln lol
You know you could just get a dado blade for that table saw and cut that whole piece out in one go
Thumb in the bum. Buttplug. Do I detect a theme here? Congratulations guys. Love the vids.
Looks like all that wood, wouldn’t.
2:24.., "I'l provide Marrool support!" :-p
lol
✨💯✨👍
Fits like a thumb in a bum, we had to stop the video because my wife was laughing so much. Is that a commonly used expression in Oz?
LMAO Too funny.
😎😎😎😎😎👏👏👏👏👏👏👏👏👏👏👏👏
I don't read all the comments. But I always wonder who's giving the thumbs down 😒
Can one please explain for me?
Fair winds down there,,, /),,,,,
Jealous and envious I believe.
Some people use the thumbs down system as a lazy way to say 'stop recommending videos like this to me' (there is actually a proper way to do that).
Also, some people use bots to add more thumbs ups to their own videos. So that they don't get caught doing this, the bots also randomly give thumbs up and thumbs down votes to other people's videos as well.
And then there are some who've been blocked for posting inappropriate comments, who then proceed to give a thumbs down to every subsequent video that comes out. FRS has a few of those. Seems like a lot of wasted effort to me, but I guess some sad types really like holding on to their grudges.
@@Garryck-1 @tent god
Some people need a life
Are the dislikes for Troys uneven hoodie string??? :P
:)
(:
"Try to keep the criminals out... if we ever go someplace where there are criminals." Troy! Are you baiting non Aussies!? 😉
3:36.., "Yep, I'm gonna fart".., Pascale remember your a lady :-0 .., just having my funny half hour :-p
Oh the facial contortions required to get those cuts exactly right. You do have to hold your mouth just so.