✅ Materials used in this video include (affiliate links): ➡ LOKLiK Crafter Cutting Machines - amzn.to/48B4XXB ➡ LOKLiK Idea Studio Software for PC and Mac: www.loklik.com/download
Thanks so much for the helpful information. I am so afraid to do the update because some reviews says that the update version is hard to understand ❤️ Will get to know more of the machine and watch more of your videos. ❤️
I jumped right in and did the update with no issues. Hoping the same for you. I’m thrilled with the way the stickers cut so well. Excited to see what LOKLiK does next. 😊
Tina, the process is iterative. First I had to remove all the previously stored gubbins by performing a Help/Reset Calibration Value, I reset both, I then had a disappointingly poor match on the first run, the second was quite good, the third was so good that each cut was *precisely* in the centre of a reference lines, eyesight excepted.. So they listened, you reported. Keep up the good work. Regards, Francis.
Hi - thanks for the feedback. I’m going to look into what you described and maybe do an updated video. If it helps one it may help many. Appreciate your comments. Thank you 😊
I'm interested in this machine, but I need to wait it out a bit for them to make more improvement with the Print and Cut feature. Also your sticker cuts looked rough, maybe it was time to change the blade, not sure. Thanks for the update.
Thanks for the feedback. We haven’t cut small things…yet, but others in our Facebook group have. Check it out here - 📸 Look at this post on Facebook facebook.com/share/h5GMPw8apnrN7YdF/?mibextid=K35XfP
It's better in the latest version of the software v1.9.7 and firmware v0010. Calibration takes time and many attempts, but does get there. There is supposed to be a big software update coming in June as well. I have high hopes for that.
Hiya so I'm not sure what's up with my machine. straight up the bat printing the calibration sheet and it's only showing the borders on the left and not the right. Also the mat changes as well when it's on standard cut its 300mm but when I change it to print and cut it changes to 210??!?. I have no idea what to do to fix it! HEEELPPP!!
The latest version of the software is v1.9.7 and the latest firmware is v0010. With these, there is only top left and bottom left registration marks. Not sure about the mat issues. Sorry.
Hi, new to your channel and I finally unboxed my LOKLiK machine today. I did do the update for the machine. Since I don't have a printer to printout the calibration sheet, do I do it using the LOKLiK machine?
You only need to calibrate if you are making stickers (print then cut). To calibrate, you have to be able to print the calibration sheet out on a laser or inkjet printer. If you want to cut vinyl or make cards, go for it without calibration. 🙂
@@craftwithfelicia Oh okay. I did some rhinestone decorating on my pair of Ugg boots. I want to do the Ugg boot symbol (word) and iron on the front of the boot and of course rhinestone it.
I updated my loklip app and firmware version 009 but when I try to calibrate it doesn't cut. And it has 2 registration marks instead of 4. I did everything I could, i restart, uinstall but it still doesnt work and failed to read marks. What will I do? please help me
Which version of the software are you on? Which version of firmware? I haven’t upgraded to firmware v009 - been out of pocket the last week - but plan to work on this in the next day or so.
I have been having issue with the corner guides can you point me in the right direction what steps I will need to get the corner guides I am only getting 2 left corners
✅ Materials used in this video include (affiliate links):
➡ LOKLiK Crafter Cutting Machines - amzn.to/48B4XXB
➡ LOKLiK Idea Studio Software for PC and Mac: www.loklik.com/download
That's some incredibly accurate calibration! Now I wish Loklik software had a selection for sticker paper.
Hold tight. I’m sure they are working on it.
Thanks so much for the helpful information. I am so afraid to do the update because some reviews says that the update version is hard to understand ❤️
Will get to know more of the machine and watch more of your videos. ❤️
I jumped right in and did the update with no issues. Hoping the same for you. I’m thrilled with the way the stickers cut so well. Excited to see what LOKLiK does next. 😊
Tina, the process is iterative. First I had to remove all the previously stored gubbins by performing a Help/Reset Calibration Value, I reset both, I then had a disappointingly poor match on the first run, the second was quite good, the third was so good that each cut was *precisely* in the centre of a reference lines, eyesight excepted.. So they listened, you reported. Keep up the good work. Regards, Francis.
Hi - thanks for the feedback. I’m going to look into what you described and maybe do an updated video. If it helps one it may help many. Appreciate your comments. Thank you 😊
Wow thank you for this video this is so helpful. Hope you can also make one on how to calibrate the firmware.
You’re welcome and I’ll do one on the firmware shortly.
I'm interested in this machine, but I need to wait it out a bit for them to make more improvement with the Print and Cut feature. Also your sticker cuts looked rough, maybe it was time to change the blade, not sure. Thanks for the update.
Fair enough!
I’m working from my iPad Pro and l can’t even find the option for print and cut ,is the set up different on windows?
I haven't used the software on my iPad so I'm not sure what's different between that and Windows.
I'm so tempted by this new machine - how accurate is it for cutting small shapes and details?
Also, that's a very useful tutorial you posted.
💜💜💜
Thanks for the feedback. We haven’t cut small things…yet, but others in our Facebook group have. Check it out here - 📸 Look at this post on Facebook facebook.com/share/h5GMPw8apnrN7YdF/?mibextid=K35XfP
can you adjust the registration marks?
No you can’t.
Hello, from Philippines here! Loklik is now sale in ours, Im thinking of buying, how good is its print n cut now?
It's better in the latest version of the software v1.9.7 and firmware v0010. Calibration takes time and many attempts, but does get there. There is supposed to be a big software update coming in June as well. I have high hopes for that.
Hi! also from philippines, what paper did you use for calibrate the machine? thanks @@craftwithfelicia
Hiya so I'm not sure what's up with my machine. straight up the bat printing the calibration sheet and it's only showing the borders on the left and not the right. Also the mat changes as well when it's on standard cut its 300mm but when I change it to print and cut it changes to 210??!?. I have no idea what to do to fix it! HEEELPPP!!
The latest version of the software is v1.9.7 and the latest firmware is v0010. With these, there is only top left and bottom left registration marks. Not sure about the mat issues. Sorry.
what paper you use for sticker?
Joyeza - I get it here on Amazon amzn.to/4d2hmW9 #ad
Hi, new to your channel and I finally unboxed my LOKLiK machine today. I did do the update for the machine. Since I don't have a printer to printout the calibration sheet, do I do it using the LOKLiK machine?
You only need to calibrate if you are making stickers (print then cut). To calibrate, you have to be able to print the calibration sheet out on a laser or inkjet printer. If you want to cut vinyl or make cards, go for it without calibration. 🙂
@@craftwithfelicia Oh okay. I did some rhinestone decorating on my pair of Ugg boots. I want to do the Ugg boot symbol (word) and iron on the front of the boot and of course rhinestone it.
Hello, tfs. Do I need to calibrate if just using cardstock?
I updated my loklip app and firmware version 009 but when I try to calibrate it doesn't cut. And it has 2 registration marks instead of 4. I did everything I could, i restart, uinstall but it still doesnt work and failed to read marks. What will I do? please help me
I’m going to upgrade to firmware v009 and will post m findings.
Hey do you know when it will be available to donfrom android app?
Haven’t heard yet.
How comd when I try to print the calibration paper I only have 2 of the outside grid guard line instead of the 4 corners?....
i have the same problem too and I don't know how to fix it :(
Which version of the software are you on? Which version of firmware? I haven’t upgraded to firmware v009 - been out of pocket the last week - but plan to work on this in the next day or so.
I have been having issue with the corner guides can you point me in the right direction what steps I will need to get the corner guides I am only getting 2 left corners
We will check it out this weekend and report back our findings.
update ur firmware
@@DoubleZClips - firmware v0010 and software v1.9.7 works much better.
There's no layers button for me 😢
Check in the updated v2.0 that came out the end of June. Layers are to the right.
Can i use my iPhone for this
Yes
Can i use my iphone for
Yes
The print and cut stopped working after the update! I can't even doing a cut calibration! this machine has gone from bad to worse. I'm over it.
Ugh! I haven’t tried but will tomorrow and report my findings. Fingers crossed.
@@craftwithfelicia Hola ha intentado cortar con el software 1.9.7? solo me aparecen dos bordes y mi loklik no la lee y no puede cortar
@@LeudysRojas - I have and it works great. I was making stickers with it yesterday.