Damn! Your Content is absolutely amazing. Thank you for your inspiration. I'm still a beginner in 3d printing but you already created the note holder with the slot for the lamy pico pen which is really great. Keep up the good work, you got my sub! :)
Wow, thanks a lot for the kind words! it's just awesome to know my videos inspire others! Hope you have a super fun with 3D printing just like I do! oh, and thanks for the sub as well!! cheers!
Hey there! There are a bunch of ways to create a timelapse like that. In my case, I have modified my Ender 3V2 and attached a shutter switch to it. Then, I use a plugin called "Custom Timelapse" for Cura. Basically, after each layer is printed, the switch triggers the DSLR camera's shutter. That’s why it looks like the print is growing without the head moving. There are tons of fun ways to achieve this, so explore and find the way suits you best! Here are some links that you might like. Good luck! ua-cam.com/video/NgZZzi6sRDU/v-deo.htmlsi=sYTwOUQhsuC8aYj5 ua-cam.com/video/FC5av4OwNuc/v-deo.htmlsi=JVoJxitul6VTrzC-
見てて気持ちのいい動画ですね!素敵です!
3Dプリンターの活用の仕方も、動画のセンスもカッコいいです!
ありがとうございます!🙏
おしゃれで素晴らしいと思います。これからも動画配信楽しみにしています。
モチベが上がるコメントいただきありがとうございます!不定期ですが、また楽しんでいただければと思います!
売ってたら買うレベルでカッコいい
ありがとうございます!作り手としてめちゃくちゃ嬉しいです!😭
Your video style and design are so dope
You totally made my day! Thanks a lot!
@@CRAFDO Do you have instagram, i want to follow you. I amaze by your work, it so minimal and so technical
You flatter me, but thanks so much! I was just about to make an IG account for this channel. I’ll put the link above when it's ready!
Damn! Your Content is absolutely amazing. Thank you for your inspiration. I'm still a beginner in 3d printing but you already created the note holder with the slot for the lamy pico pen which is really great. Keep up the good work, you got my sub! :)
Wow, thanks a lot for the kind words! it's just awesome to know my videos inspire others! Hope you have a super fun with 3D printing just like I do! oh, and thanks for the sub as well!! cheers!
こんかい、デスク周りを検索してて、こちらの動画を見させてもらいました。
ダイソーと3Dプリンターで掛け合わせると、こんなにいいものができるのですね。
クラフ道さんのアイデアありきですけど
3Dプリンターでの作品ができる過程がわくわくします。
パンチングボードのアイデアもお願いします。
ものづくりの楽しさを共有したく始めたUA-camでドンピシャなコメントいただき、めちゃくちゃ嬉しいですっ、ありがとうございます!パンチングボード、面白そうですね!工作リストに入れておきますっ🙏!
初コメ失礼します!
サポートのクリアランス設定がバチバチに決まってて最高ですね!
インフィルのみの印刷もウォールがないと難しいと思いますが崩壊せずに綺麗に出せててすごいです!
個人的には最後のゲーミングサボテンがめっちゃ好きですw
初コメありがとうございます!
お褒めいただき、恐縮です。E-Stepなどのキャリブレーションは念の為行ったのですが、今回はフィラメントとの相性が良かったのかな~と思います!
ゲーミングサボテンっっ!サボテンもRGBで光らせる時代ですっ!笑 🌵👾
@@CRAFDO
ステップ数調整までしてるとはさすが!
今後も動画楽しみにしてます...!!
ありがとうございますっ!
まだまだ初心者ですが、今後も楽しんでいただけたら幸いです!
Real nice 👍🏾
Thanks!! 😉
はじめまして
ひょんなことから最近3Dプリンタを入手した初心者です。登録して参考にさせていただきます。
初コメで質問で恐縮なのですが,17:04辺りでお使いのフィジェットトイは何でしょうか?
(3Dプリンタで作りたいと思っており…)
コメントありがとうございます!細かいところまで見ていただいて作り手としてはとても嬉しいです!
お尋ねのフィジェットですが、ギリシャ人の友達から譲りうけた「ベグレリ(Begleri)」という物です。
ja.wikipedia.org/wiki/ベグレリ
ua-cam.com/video/4yZC1inesPY/v-deo.htmlsi=TdX1j2-URPF0qFYk
遠心力でビーズを回していくのですが、結構奥が深く難しいです…笑 その代わり出来た時の達成感は大きいのでハマります。
オリジナルのベグレリ作りっ、めちゃくちゃ可能性があって面白いと思いますよ!
遠心力を出すためにある程度の重さ(僕が持っているビーズは6g/個でした)が必要なので、スライサーソフトで密度を調整してみてください!
応援してます!
和製dukedocksの誕生や!
お…恐れ多すぎます…🫨
Hello, can you tell me how to make a time lapse like the 3:44 one? It's like the print head isn't moving but printing
Hey there! There are a bunch of ways to create a timelapse like that. In my case, I have modified my Ender 3V2 and attached a shutter switch to it. Then, I use a plugin called "Custom Timelapse" for Cura.
Basically, after each layer is printed, the switch triggers the DSLR camera's shutter. That’s why it looks like the print is growing without the head moving.
There are tons of fun ways to achieve this, so explore and find the way suits you best!
Here are some links that you might like. Good luck!
ua-cam.com/video/NgZZzi6sRDU/v-deo.htmlsi=sYTwOUQhsuC8aYj5
ua-cam.com/video/FC5av4OwNuc/v-deo.htmlsi=JVoJxitul6VTrzC-
@@CRAFDO Thanks for your helpful reply!