i tried to upload the code but got this message The project uses 4124 bytes (12%) of storage memory. The maximum size of the program is 32256 bytes Global variables use 241 bytes (11%) of RAM, leaving 1807 bytes for local variables. Maximum size 2048 bytes. avrdude: ser_open(): can't open device "\\.\COM3": The system cannot find the file specified. what can i do?
hey bro i did as you shown in the video i inserted the code but it is doing nothing please reach out to me i have to do this for school project it is in 3 days pls
hello, i'm new in this kind of technology. and i'm confused to why ours isn't working. we've followed all your steps but, it's not working. i mean, it is but, sometimes it won't 😓😓 please help. D:
Connect as per the description and video provided but servo motor automatically rotates with out any sensor detection . Can u help me what could be the error . I uploaded the code as well which is provided in descritption
Hi, I did whatever you showed in the tutorial. However I noticed that in my model the servo motor barrier is not moving either up or down. as soon as I connect the circuit it to the laptop it is moving upwards but is stopping over there. Pls guide me.
Sir i did everything, but it it not working, when i connect my ur sensor, the motorr stops to work on the upward position, after i remove ur, it is moving up and down continuously. Pls help
hey , bro i did every thing right but the code have a problem when the ultra sonic don't see anything the motor servo work but when it see something It stops so yea can you help me I have a school project after 2 days so please response fast
Join telegram group for any doubt. Link in description.
Me puedes regalar el código
It's in description
Sorry but where is the code
@Kid04414 it's in description
Bhai code
thank you very much i made it thanks
i have issue after i upload the code its done compiling but the servo doesnt move and the sensor doesnt react neither can you help please??
Sir dono taraf se get open karne ke liya kya kare
Hi I am your big fan ❤❤❤❤❤❤❤❤❤❤❤❤❤❤😊
Thanks for your support and please subscribe to keep supporting.
I have a issue in servo motor its not rotating 90 degree its rotating many times.... Continuously.... Can u solve the problem plz
join telegram group
Sir dono taraf se get open karne ka system kaise lagaye
Not made yet
Sir will it work after applying the code if we detach the cable from laptop will it work and also give the product links
Yes it will work and product link in description.
Can you please say this video this thing only works with battery
It can work with laptop with stable power supply also.
Hlo sir after uploading code if we detach with computer does it work
Yes
kok saya harus di upload baru servo motor nya berfungsi
Nice Oppenheimer wallpaper
Thank you, I am big fan of him. The movie was amazing by Christopher nolan and music is just💥💥💥💥💥.
ardeion ko hamesh laptop se connect karna parta hai kya
please reply about this sir it very necessary tomarrow is the last date to submit the project
Awesome 👌🏻
Ứng dụng hay quá bạn ơi
Cám ơn bạn tôi
Ye coding ka name kya hai.... Aur kaise seekh sakte hai????
It's basically based on C language and arduino have it's own libraries so you just have to type on UA-cam "arduino programming".
i tried to upload the code but got this message
The project uses 4124 bytes (12%) of storage memory. The maximum size of the program is 32256 bytes
Global variables use 241 bytes (11%) of RAM, leaving 1807 bytes for local variables. Maximum size 2048 bytes.
avrdude: ser_open(): can't open device "\\.\COM3": The system cannot find the file specified.
what can i do?
1. Disconnect all wires from arduino then reset the arduino and re-upload the code.
2. Or try to change the port from tools.
Can we give power to aurduiino from laptop cable to direct electricity
You can give power to arduino from laptop.
ardunio board electricity kaha se leta hai sir
Good 👍
even i made as per the video it is not working, i dont know how to solve it, can you help me?
Join telegram group I will solve this.
when connect it the app s is not appearing
??
The software in which we should program is not appearing
It's name is arduino ide
Hey where to make the code i need the answer now and
Is code is working properly? Without any error
Yes
@manahiljamil6034 Did you try it ? Did it work without eror ?
@@PsYra8 yes
Bro i need a help. The code is not working
Join telegram group. I will help you there. Link in description.
is your code working or not please tell i have a school project tommorrow fast
Working good
hey bro i did as you shown in the video i inserted the code but it is doing nothing please reach out to me i have to do this for school project it is in 3 days pls
Hello, can we make it become parallel circuit? How many maximum circuit? So we need servo motor and cencor in every toll/parking gate?
What to make parallel?
hi, do u have a flowchart and diagram block? it's for my school project, i appreciate if you would help, thankuu 🤩🤩
Join telegram group I will provide it there. Link in description.
@@SimpleCircuitsOfficialI have no telegram plz tell solution for it
Bro you have use tht Arduino Uno and link is for and uno..now will the same code of your work in and too?
Yes
I have a issue in servo motor its not rotating 90 degree its rotating 30 degrees.... please help
Try to increase the angle
From the code
@@SimpleCircuitsOfficial which part please it's due in 5 hours
@lin-jx6zq where some angels are written go through the code and check.
can we use mg 995 servo ????
pls answer fast
Yes you can.
hello, i'm new in this kind of technology. and i'm confused to why ours isn't working. we've followed all your steps but, it's not working. i mean, it is but, sometimes it won't 😓😓 please help. D:
Join telegram group I will solve this problem.
where is the link?
Connect as per the description and video provided but servo motor automatically rotates with out any sensor detection . Can u help me what could be the error . I uploaded the code as well which is provided in descritption
Make all the connections stable and provide stable power supply.
same problem with me
still not working
@@SimpleCircuitsOfficial please help
Do the same
Hi sir my servo motor is not rotating wt is the issue can u explain plz
Join telegram group I will solve this problem.
สวัสดีครับครูจุก
?
Is the code is working ...sir do you removed the errorr..can we run this sir
No error in code.
@@SimpleCircuitsOfficial my code cant working, i need solution
Arduino Uno r3 par hoga na
Yes
Sir can you provide this projects ppt 🙏 please
Bro can we do two working tolls with two breadboards, two ultrasonic sensors, two servo motors but one Aurdino
Yes
Hi, I did whatever you showed in the tutorial. However I noticed that in my model the servo motor barrier is not moving either up or down. as soon as I connect the circuit it to the laptop it is moving upwards but is stopping over there. Pls guide me.
Use stable power supply.
you got the wrong one you got the one that spins foever okay
Stable powersupply
Bro in which app we should need to insert this code
Arduino ide
plz tell me code i wnt to copy it plzz tell me
It's in description.
Its work?
Definitely
hi, i did every thing right but the error : avrdude: stk500_recv(): programmer is not responding . is poping can you help me ?
Reset arduino
Sir i did everything, but it it not working, when i connect my ur sensor, the motorr stops to work on the upward position, after i remove ur, it is moving up and down continuously. Pls help
Check the ultrasonic sensor wiring with the arduino and for more you can join telegram group for more live discussion.
hey , bro i did every thing right but the code have a problem when the ultra sonic don't see anything the motor servo work but when it see something It stops so yea can you help me I have a school project after 2 days so please response fast
Contact me after 10hrs
@@SimpleCircuitsOfficialI tried thecode and the ultrasonic sensor doesn’t work and does not detect but servo motor is work , can u help me please
Join telegram group I will solve this problem
My Servo Motor is not going Down again Please Help!
Use stable supply or remove hand after passing car.
Can you please send this thing work with battery 3:
What battery 3??
Can u aploud the code
It's in description
But ise kese pta chalega payment ho hui ya nhi
This is basic version of what you're expecting. I will make that in future.
Can u give me the link of arduino uno please
It's in description
can we use normal wires instead of jumper?
Yes, you can use.
My code is not uploading error return code is not 0
Join telegram group and show
Funktioniert es auch mit Mblock? Weil wir müssen in der Schule mit Mblock programmieren.
I haven't tried that.
Which coding language is this
C and cpp
Can you send the code 🥺🥺🙏🙏
It's in description
Uno code ta ktai pabo
?
tidak bisa saya bingung
hello bro your code will not working give an error on screen
May be you haven't install the library.
Hello bang please ask for the coding code
Code is in description
What is name of this website
Which website you are talking about?
Bro can u plz send me the documentation pdf link
I don't have such
Bro help me im getting error while uploading the code
Join telegram group. I will help you there.
Sir code me bahot error a rahe hai
I will solve this tomorrow morning.
you need to install the by using money can you find a to get it free
Can someone tell me all the materials involved?
Check in description.
Hlo bro can u send me a link of documentation pdf
I don't have such
I need code
It's in description
Report pdf chahiye thi project ki
I don't have such report for this project.
Okk
From where can i get this code?
Link in description.
How to get code
It's in description
Not working bro why happened please tell me bro
Join telegram group I will solve this problem.
Bro that excitement is not working
!!!
Code pls
It's in description
Has anyone tried ?does It work I want to make it!
I have tried it's working good.
@KrishnaSharma-ji4og my code is not getting upload ...there is an error please tell
@@RahulGupta-uv1bhwhat's the problem
Hey pls tell mi connection properly@@KrishnaSharma-ji4og
Can you help me pls@@KrishnaSharma-ji4og
send code broo
It's in description
Program
In description
RBT GAMING
🤩 P R O M O S M
Thamku
Kuya hindi po siya gumagana
?
The code is full of errors
Join telegram I will solve it there
Hello can u give here i dont use telegram please @@SimpleCircuitsOfficial
Sir dono taraf se get open karne ke liya kya kare
I want code
See in description
RBT GAMING
GAMING GAMING
Sir dono taraf se get open karne ke liya kya kare