My Kickstarter failed, so I open sourced it

Поділитися
Вставка
  • Опубліковано 22 гру 2024

КОМЕНТАРІ • 1,7 тис.

  • @skyguy4164
    @skyguy4164 2 місяці тому +2168

    you have my unfailing respect for open sourcing it. I want this to be the norm for eol projects in some form or another.

    • @stuckatprototype
      @stuckatprototype  2 місяці тому +176

      thank you! I want to give back to the world at this point. I have hoarded so many projects I made over the last 15 years! I am going to be remaking a lot of them and open sourcing with a video like this one :) I do wish a lot more projects out there were open sourced, especially at end of life!

    • @JacksHQ
      @JacksHQ 2 місяці тому +22

      I agree! Let's pump the algo with more comments. This dude deserves so many more subs!

    • @leandrrob
      @leandrrob 2 місяці тому

      kickstarters are not real, its just a way to promote a product and channel a lot of your own funds disguised as money from a lot of people supposedly interested, also even with a lot of your own funds your kickstarter will probably get zero page visits if not advertised in many other media

    • @thecatofnineswords
      @thecatofnineswords 2 місяці тому +14

      I want the same to be legislated for commercial products - as epitomised by the many devices that get bricked by the manufacturers when they stop supporting them.

    • @FineWine-v4.0
      @FineWine-v4.0 2 місяці тому

      ​@@stuckatprototypebetter host it on codeberg

  • @nionnemesis638
    @nionnemesis638 2 місяці тому +63

    Wow ! It's great! You people who are open-sourcing "anything" are literally contributing to humankind.......... ☺

    • @HSNDIY
      @HSNDIY 2 місяці тому +1

      Totally agree with that! Open source has a lot to do with the progress we've made in the last 20-25 years. ut at the same time, creators and inventors need to be rewarded too.

  • @YashKumar-be9sz
    @YashKumar-be9sz 2 місяці тому +1131

    Damn I thought you were some major diy tech channel but you are really underrated i need more of these videos

    • @stuckatprototype
      @stuckatprototype  2 місяці тому +34

      thank you!! I am making more, thanks for your support!

    • @YashKumar-be9sz
      @YashKumar-be9sz 2 місяці тому +15

      ​@@stuckatprototype This a fact that i went to the channel looking for more videos then saw that this was the first video then watched all the shorts

    • @stuckatprototype
      @stuckatprototype  2 місяці тому +14

      @@YashKumar-be9sz Thank you!!! that means a lot to me! I am glad you enjoyed my videos! I am making more :) Thanks for the support!

    • @indiannoob3145
      @indiannoob3145 2 місяці тому +5

      Not gonna lie. Exact same thing happened… Amazing work dude.

    • @Mug-Red
      @Mug-Red 2 місяці тому +2

      It's his first long form, and he has a big audience realitively speaking. Keep up the good quality video, and he'll make it.

  • @grungko
    @grungko 2 місяці тому +215

    What a kind move to open source your project. Failing to raise enough can hit you down, but having enough courage to improve the project before sending it is a real proof that you liked this one. I'm wishing you the best of luck for your future projects !

    • @stuckatprototype
      @stuckatprototype  2 місяці тому +12

      Much appreciated! Its humbling how well received this has been! thanks for the support!

    • @edwardfletcher7790
      @edwardfletcher7790 Місяць тому +1

      ​@@stuckatprototypePlease, please, drop the LOUD repetitive music, it's infuriating!!! 👺

    • @somponglertpolpairoj6762
      @somponglertpolpairoj6762 Місяць тому

      8:33 😮😂​@@stuckatprototype

  • @gabrieldolce889
    @gabrieldolce889 2 місяці тому +295

    A new electronics tech channel is born! I can’t wait to see what awesome projects you make 😁

    • @stuckatprototype
      @stuckatprototype  2 місяці тому +19

      thank you! I have a lot planned! next one will be the one that wins the vote in the community post :)

    • @KaziNazmulYT
      @KaziNazmulYT 2 місяці тому

      ​@@stuckatprototype Can't wait to check out your next video! Just don't stop making

  • @AntotaboQC
    @AntotaboQC 2 місяці тому +260

    Neural network to map RGB to 3 actions seems just a tiny bit excessive XD but the rest of the project is nicely executed. Well done sir

    • @andriiukraine6697
      @andriiukraine6697 2 місяці тому +34

      IMHO it is overkill here. But for fun project it is okay while you have fun)

    • @LombardoCodes
      @LombardoCodes 2 місяці тому +9

      Thats what I was thinking 😂

    • @SwiftyTheSword94
      @SwiftyTheSword94 2 місяці тому +11

      I think the optimal strategy would have been to write a distance function on color space(a^2+b^2+c^2), iterate over all known actions in a (color, action) map, and see which has the smallest distance (within some margin of error).

    • @AntotaboQC
      @AntotaboQC 2 місяці тому +11

      @@SwiftyTheSword94 agreed. Or instead of color space (which I assume still means RGB ? ) convert to HSV so you can empirically play with the relative importance of Hue / Saturation / Value in the "error" function.

    • @Shocker99
      @Shocker99 2 місяці тому +16

      But at least he gets to slap AI on the box and ask for multi-million dollar VC funds. 🤣
      I think both of your replies are still too complicated. The color sensor already indicates RGB. High values = white, low values = black, green is significantly higher than the other two = green. So it just becomes a simple switch/if-else statement.

  • @labhjoshi3182
    @labhjoshi3182 2 місяці тому +75

    criminally underrated video
    The projects seems so cool!!
    I suggest to sell a ready made version of this to people who wanna try this but don't wanna go through the hassle of soldering PCBs and all that stuff.

    • @stuckatprototype
      @stuckatprototype  2 місяці тому +26

      Thank you! Haha I could but turning it into an entire product is a different beast. I could potentially offer PCBs. Hey! If there is enough demand :) glad you liked it! And thanks for the kind words

    • @denrico777
      @denrico777 2 місяці тому +2

      Depending on the price I'd be very likely to buy at least two pcbs. ​@@stuckatprototype

    • @billkeithchannel
      @billkeithchannel 2 місяці тому +3

      There are companies in China that can crank out those cases and car parts real easy. They can machine the plastic injection mold need at a super low cost.

    • @billkeithchannel
      @billkeithchannel 2 місяці тому +2

      @@stuckatprototype My late dad started his 40 year electronics career by using the Bell & Howell kits in the 60's and early 70's. You built your own test equipment as lessons then used those built kits in learning how to design and troubleshoot components. He retired from GE Transportation Systems in 1992 after 30 years of working there.

    • @Emenemx
      @Emenemx 2 місяці тому +1

      @@stuckatprototype Would you be able to sell kits with the battery motors pcb and maybe 3d printed parts?

  • @pascualy
    @pascualy 4 дні тому +1

    Loved this project! Your enthusiasm is contagious. Hope to see more coming out of your channel!

  • @dfunited1
    @dfunited1 2 місяці тому +185

    Absolutely nobody needs a new app. I am, however, very in need of a nap.
    Subscribed!

    • @stuckatprototype
      @stuckatprototype  2 місяці тому +14

      hahaha while I don't like naps, I do need some sleep one of these days ;) thanks for the support! I am glad you liked it!

  • @user-wi5vi7dd3z
    @user-wi5vi7dd3z 2 місяці тому +61

    Have you considered making a 3d printed wheel with a groove and putting a small O-Ring onto it? You would have a nice rubber surface that is probably quite round. Also more grip then just harder plastics.
    Everyone can get O rings and they would allow for more common printing techniques for the wheels!

    • @stuckatprototype
      @stuckatprototype  2 місяці тому +16

      thats an awesome idea! I actually did the opposite, I made the groove on the outside. i.e. for a tire that can wrap around it and I put clear heat shrink over it! its not clear in this video, but its on the back wheels :)

    • @aspzx
      @aspzx 2 місяці тому +8

      @@stuckatprototype I was thinking of maybe using lego wheels since I don't have an SLA printer. Would that be possible?

    • @SenileOtaku
      @SenileOtaku 2 місяці тому +1

      I would think some wheels from "Hot Wheels" toys would be simpler. There must be a ready source of replacement ones for people restoring old ones.

    • @ized88
      @ized88 2 місяці тому +2

      @@aspzx Depending on your filament printer it should work, too. Espacially with a smaller nozzle like 0.2 or 0.1mm
      I give it a try with my bambu x1c and a 0.4mm nozzle tomorrow. I found a great profile for small details with which they should work

  • @mankoc
    @mankoc 2 місяці тому +89

    Please just keep on doing more of this, your first video is top notch. Not a fan of the repetitive background music choice, though, but it's such a minor detail when you got almost everything right from the start. Looking forward to your next one.

    • @stuckatprototype
      @stuckatprototype  2 місяці тому +9

      thanks for the feedback and thanks for subscribing!! I need to work on the audio, thats what I am going to improve in the next one. Thanks again!! :)

    • @TheGunnarRoxen
      @TheGunnarRoxen 2 місяці тому +5

      I agree. The video was great but the music got pretty repetitive, but I'm sure you'll fix that over time. Subscribed 😁

  • @ericguillemette7100
    @ericguillemette7100 Місяць тому +1

    Offering your project as open source demonstrates great generosity on your part. Congradulations on your gesture; it has earned you a new member and close follower for your channel. 👍

  • @parvuselephantus
    @parvuselephantus 2 місяці тому +14

    It was great idea to open source it! After first minutes I had great hope I could recreate it... my dreams failed seeing such a great park of machines behind (even though you could simplify few things here and there - like wheels. take these failed PLA prints and put a rubber gaskets on it. hint: driller + sanding paper).
    Now is the time you kickstart it!

  • @THEcjustins
    @THEcjustins 2 місяці тому +31

    Awesome idea! Bring back an updated Kickstarter version as well!! I’d love to just buy like a 4 pack with some hazards and barriers and still be able to 3D print car bodies and other obstacles!

    • @ArchieMassey
      @ArchieMassey Місяць тому

      Please, please reconsider making these as kits! Despite some
      Reasonable technical skills, sourcing all the components and making the pcbs is a step too far

  • @ALOSEmployee
    @ALOSEmployee 2 місяці тому +135

    According to these people you were at 300 only 13 HOURS AGO??? You need to be WAY higher!! Theres no way you're below MINIMUM 750k. Subscribed!!

    • @stuckatprototype
      @stuckatprototype  2 місяці тому +13

      The support has been incredible! I am glad you enjoyed the video! Thanks for subscribing!

    • @PixelSheep
      @PixelSheep 2 місяці тому +1

      over 13.000 now - its incredible!

    • @Sithhy
      @Sithhy Місяць тому +1

      @@PixelSheep 26k subs after 2 weeks

  • @sergeychistov8162
    @sergeychistov8162 2 місяці тому +2

    All failing projects deserve to go open-source. You have my respect!

  • @devvratarya1
    @devvratarya1 Місяць тому +30

    Dude just pulled out 3d design, embedded design, and Machine learning into just one project. That take 3 engineering degree. Great Work bro.

    • @rashidkhwaja959
      @rashidkhwaja959 Місяць тому +2

      To be fair as a data scientist you no longer need a degree to do ML. Plenty of smart high schoolers do ML projects now

    • @idan5323
      @idan5323 Місяць тому

      The ML part was complete bullshit just to sound smart. This is insanely unnecessary.
      And no, none of these things takes any degree at all

    • @Ciprian-Amarandei
      @Ciprian-Amarandei 29 днів тому

      I do not agree. I built my own electronics and also created neural networks and my background is classical music. You dont have to have engineering degrees to do these kind of things

  • @HuffyT266
    @HuffyT266 2 місяці тому +4

    Great project! Thank you for taking the time to open-source it, while also improving on your previous work. This would be a great setup to have at home and play with friends.

    • @stuckatprototype
      @stuckatprototype  2 місяці тому +1

      thanks for the support! I am glad you liked it!

  • @awdhut-e2e
    @awdhut-e2e 2 місяці тому +836

    For some reason youtube is recommending me random chanels with 300-400 subs and looking at their peoduction quality it looks like it should be atleast 1M +
    Is youtube glitching or this guy really have 375 subs ?

    • @stuckatprototype
      @stuckatprototype  2 місяці тому +102

      Im at my humble beginning! Glad you like it!! Thanks!!

    • @fridolineckerd6135
      @fridolineckerd6135 2 місяці тому +47

      well the number of subs doubled just two hours later. So i guess he will get there if he has a few more kickstarters to opensource, up his sleve

    • @JevKuznetsov
      @JevKuznetsov 2 місяці тому +11

      Same here, subscribed right away, this should be higher! :)

    • @stuckatprototype
      @stuckatprototype  2 місяці тому +47

      @@fridolineckerd6135 😂while I dont have any more kickstarters to open source, I have a ton of cool projects that I am going to be making videos on! its been a wild day! unreal how well this video is doing

    • @stuckatprototype
      @stuckatprototype  2 місяці тому +6

      @@JevKuznetsov thank you!! :)

  • @percy9228
    @percy9228 2 місяці тому +1

    You could have made this into a mini series with episodes of each part, the wins, the struggles. I would have watched everyone. I still crave more on each part right now. Man you're a genius and I'm glad you are sharing your work. thanks and looking forward to future videos. Subscribed

  • @LucidFabrics
    @LucidFabrics 2 місяці тому +9

    I'm a software engineer with a bit over 20 years experience. I would like to jump into electronics as a hobby, I bought myself a home lab for that ex: hako soldering station, a quick 861DW and some flux / solder. I have a bit of arduino experience play but it stops there. I hope to learn a lot from this channel. ** Subscribed **

    • @stuckatprototype
      @stuckatprototype  2 місяці тому +3

      nice!!! welcome to the embedded world!! I hope you get a lot of value from the project! I highly recommend getting on an ESP32, they are super fun and super cool to work with! Thanks for the support!

    • @aspzx
      @aspzx 2 місяці тому +1

      I'm a software guy as well but there's something deeply satisfying about building hardware. The ESP32 is a great chip to get started.

  • @pya-d2u
    @pya-d2u 2 місяці тому +42

    Legendary youtube channel in the making. I'm here for it!

    • @stuckatprototype
      @stuckatprototype  2 місяці тому +2

      thank you!!! I am at my humble beginnings :) this means a lot to me!

  • @sorenstorm
    @sorenstorm 2 місяці тому

    I really love following prototyping channels like stuffmadehere and Mark rober. This project and channel has similar potential. I hope people realize the enormous time and money put into this project AND the fact that you on top of this effort place such potent and fun project in open source is just super cool. Also really like the channel name.

    • @stuckatprototype
      @stuckatprototype  2 місяці тому

      Thanks so much for the super kind words! I’m humbled how well this has been received!

  • @metalheadmaker
    @metalheadmaker 2 місяці тому +9

    Dude your skill set is stacked. I'm so glad I got here at the start of your channel. Can't wait to see where you take it!

    • @stuckatprototype
      @stuckatprototype  2 місяці тому +2

      thank you!!! I cannot believe how positive the response has been, I have so many fun projects planned. I cannot wait to share them!

  • @b881903
    @b881903 2 місяці тому +3

    Absolutely respect your creation and open-sourcing of it.

  • @AdamKMarsh
    @AdamKMarsh 2 місяці тому +6

    Even though I probably won't make one myself, I appreciate your open-sourcing it. I wish this would become the norm rather than an outlier.

    • @stuckatprototype
      @stuckatprototype  2 місяці тому

      thank you! I am glad you like it. and thanks for subscribing!

  • @mrmadi035
    @mrmadi035 2 місяці тому

    that much of a dedication and work for a youtube video and still getting 8.8k subs and 120k views in two days thats not fair. subscribed, liked and turn the notifications on . man i need more content like this. love it.

    • @stuckatprototype
      @stuckatprototype  2 місяці тому

      thanks so much!!! I honestly never expected it to do this well! Its been a wild ride. Thanks so much for your support!

    • @mrmadi035
      @mrmadi035 2 місяці тому

      @@stuckatprototype keep working someday everything will be returned more than you effort.

  • @Loopy5418
    @Loopy5418 2 місяці тому +5

    Those kids are sure lucky to have a dad like you. Thanks for your creations and hardworks!

    • @stuckatprototype
      @stuckatprototype  2 місяці тому +2

      Thank you so much for the kind words!

    • @KeithOlson
      @KeithOlson 2 місяці тому

      ​@@stuckatprototype You are missing one important feature: RGB leds in the top shell of the car *AND* the controller. Why? So that each player can use the buttons on the controller to set their controller and car colour to tell them apart when a half-dozen are racing around.
      ...and you should binge on 'micro rc' build videos. Those folks can get up to some pretty crazy stuff. One neat trick to making tires that they use is to clamp an o-ring on a nut & bolt, then chuck it on a drill and run it against an emery board to shape the o-ring into a proper tire.
      Cheers!

  • @Bytekin101
    @Bytekin101 2 місяці тому +7

    your kickstarter may have failed but your inspiration continues to grow! Awsome project

    • @stuckatprototype
      @stuckatprototype  2 місяці тому

      Thank you so much! I am glad you liked it! and thank you for the kind words!

  • @dcdales
    @dcdales 2 місяці тому +3

    Commenting because I want the algorithm to show me more things like this.
    Creative, productive, techie. Very cool!!!

  • @Lykai150
    @Lykai150 2 місяці тому

    oh my god, this is amazing. It reminds me sooooo much of the old MicroSizers. Thanks for sharing this great project with us! Imagine it had little swappable motors like the MicroSizers did.

  • @sayo9394
    @sayo9394 2 місяці тому +2

    thank you for making this open source! for the many who don't have a 3D printer, or PCB building skills, it would be great if you can have your own store and sell kits! pre-assembled or for assembly...

    • @stuckatprototype
      @stuckatprototype  2 місяці тому +3

      I am glad this project is able to see the light of day again :) for now no plan for kits, but I am working on updating the necessary bill of materials, etc. that way anyone can make it! thanks!

  • @MegaManNeo
    @MegaManNeo 2 місяці тому +2

    Once your kids grow older, they will love you even more for going through all this to make them smile :)

  • @freakymidget
    @freakymidget 2 місяці тому +13

    Really cool project! Its so cool to see creators with small followinga demonstrating such high production quality.
    The only nitpick I'd recommend would be the sound mastering. Tone down the music and SFX slightly, and we'll be able to focus on your awesome content better

    • @stuckatprototype
      @stuckatprototype  2 місяці тому +3

      thanks for the advice! thats actually something I have been trying to learn. 90% of editing is sound design! Will do for the next video! cheers! :)

  • @local-admin
    @local-admin 2 місяці тому

    You are on the good side of modern inventions…have everything I can give you: my time, effort, a like and sub. Hope to see great things!

  • @JeromeDemers
    @JeromeDemers 2 місяці тому +48

    you can use "fuse holder" soldered directly on the PCB so the motor can clip into them. So no need of 3D printed part! Check this one for example FC-203 BRIGHT TIN

    • @svgPhoenix
      @svgPhoenix 2 місяці тому

      But then you're applying torque directly to the PCB.

    • @JeromeDemers
      @JeromeDemers 2 місяці тому +4

      @@svgPhoenix I do not understand your concern? Torque will be apply no matter the mechanical device holding the motors. If you are concerned about mechanical stress on the PCB components we should not be building RC cars for kids that bumps into things 😅😆

    • @paradoxx_4221
      @paradoxx_4221 2 місяці тому

      The little motors have very little torque. With a big enough solder pad, they will hold just fine. However, I suspect the longevity will suffer

    • @ized88
      @ized88 2 місяці тому +1

      if you want to make it at least partial kids safe you would need some kind of enclosure anyway, so those holders don't make much of a difference. I guess you could use heatwrap or something similar but than you would need to do cutouts after

    • @JeromeDemers
      @JeromeDemers 2 місяці тому +1

      @@ized88 the idea of fuse holder is about ease of manufacturing. There is no need of 3D printer. You receive the PCB assembled. Then clip the motors.

  • @CHERRADMohamedElmahdi
    @CHERRADMohamedElmahdi 2 місяці тому +2

    Thank you so much for open sourcing this wonderful project, you've earned my subscription.

    • @stuckatprototype
      @stuckatprototype  2 місяці тому

      I am glad you like it and thanks for your support!

  • @madeautonomous
    @madeautonomous 2 місяці тому +3

    Super impressive! Love the creativity of using magnetic sensors and color sensor to make it more fun!

    • @stuckatprototype
      @stuckatprototype  2 місяці тому

      thank you!! I love to spice things up a bit, this one was a fun one for sure! :) glad you liked it!

  • @gigacooper
    @gigacooper 2 місяці тому

    Awesome engineering effort (prologue, requirements, simplifying, doing) with full marks for the video editing! A supercut of designing the board schematics or layout could be useful. You surely remember those labors, but for the viewer it's like you made a list of requirements and then the boards magically materialized. Not so simple in reality ;)

    • @stuckatprototype
      @stuckatprototype  2 місяці тому +1

      Thanks, I appreciate the feedback on the editing and I totally agree that a schematic and layout timelapse would have been cool. I’ll throw in snippets for the next video :)

  • @optikalefx
    @optikalefx 2 місяці тому +3

    I would love to know more about the neural network. Why did you need to reach for that? There isn't a color sensor you can buy?

    • @stuckatprototype
      @stuckatprototype  2 місяці тому +2

      sure! I didnt actually need a neural network, the color sensor outputs "raw" data, I could have used algorithms that can "decipher" the raw data. I did look into it, but it was a really fun excuse to do a neural network! :)

  • @Dragoneye7777
    @Dragoneye7777 Місяць тому

    Thank you very much to putting so much effort into a failed project to give it a second life and hopefully much joy for all the great and small kids! ;)
    What I'd like to see is a way to buy the ready PCBs for the car and the remote so i could tinker around with only modeling some funny car tops to print on my printer or programming some logic for funny gameplay.
    I hope to see some more things going n on this funny project!
    Greetings!

  • @jiachen1078
    @jiachen1078 2 місяці тому +43

    Can you sell the kit?

  • @Doggo-404
    @Doggo-404 2 місяці тому +2

    Awesome video find. You nailed this on so many levels. Best of luck with your projects and campaigns dude.

  • @mcswizz9609
    @mcswizz9609 2 місяці тому +36

    This man went from

    • @Joshpods
      @Joshpods 2 місяці тому +5

      He's at 17k now

    • @stuckatprototype
      @stuckatprototype  2 місяці тому +1

      It was a wild ride for sure! and everyone has been super supportive. Thanks!!

  • @PaulSwenson
    @PaulSwenson 2 місяці тому

    This is awesome!! Excited to see your future projects. Also this inspired me to start diving into neural nets.. I've mostly been experimenting with running LLMs on commodity HW, quantizing them to require less resources etc. This seems line a much cooler way to develop code to interpret sensor data vs. a traditional control/sense loop!

  • @hort-dog
    @hort-dog 2 місяці тому +3

    form ~400 to 4.64k subs in 14 hours your flying up, grate project man!

    • @hort-dog
      @hort-dog 2 місяці тому

      up to 4.7k after I reloaded the page...

    • @stuckatprototype
      @stuckatprototype  2 місяці тому

      Thanks! It's been amazing to see the response. :)

  • @caperdoodle
    @caperdoodle 25 днів тому

    I was waiting for a sponsor of PCBWay but was very surprised and impressed you had a pick and place machine!

  • @testerman100
    @testerman100 2 місяці тому +76

    This is brilliant:
    AI Neural Network
    But I love this:
    switch (colour_sensor_state) {
    case Sensor_Reads_Green:
    Make_car_Spin();
    break;
    case Sensor_Reads_White:
    Make_car_go_Fast();
    break;
    case Sensor_Reads_Black:
    Make_car_go_Slow();
    break;

    • @The-Cat
      @The-Cat 2 місяці тому +2

      Well pointed out!! 😆 I hate the BS Hype use of the term "AI" lol

    • @stevenrichman7101
      @stevenrichman7101 2 місяці тому +5

      i think its for getting the color input kinda right. never programmed a color sensor, but my guess would be that changing light situations and color saturations are a nightmare to get correctly detected.

    •  2 місяці тому

      @@stevenrichman7101 yes but you can get some ranges, specially if the colors are very different from each other.

  • @Jac0bAar0n
    @Jac0bAar0n 27 днів тому

    It's impressive. I congratulate you for having made something so elaborate with so much potential.

  • @mstunnikamesh
    @mstunnikamesh 2 місяці тому +1

    This is the internet made for! You sir deserve high praise for the quality of your work!

  • @shin-kuro
    @shin-kuro 2 місяці тому +91

    Somehow, the scamming kickstarter raise the huge fund and the real ones don't

    • @stuckatprototype
      @stuckatprototype  2 місяці тому +20

      i suck at marketing! but thats ok :) thanks for watching!

    • @shin-kuro
      @shin-kuro 2 місяці тому +4

      @@stuckatprototype I think maybe it's the Kickstarter system false

    • @awdhut-e2e
      @awdhut-e2e 2 місяці тому +15

      Because they promise the impossible and real engineers don't , it needs a special breed of marketing people to do that level of deceptive marketing

    • @stuckatprototype
      @stuckatprototype  2 місяці тому +5

      @@awdhut-e2e true! there have been a few examples in the tech space lately.. but that's a different story!

    • @shin-kuro
      @shin-kuro 2 місяці тому +6

      @@stuckatprototype somehow we need to open source the marketing too

  • @kreach3r
    @kreach3r 2 місяці тому +1

    I can't believe the quality of the video, the technology discussed, and the opensourcing of the files. You deserve a lot of subs. Subscribed!

  • @derpinbird1180
    @derpinbird1180 2 місяці тому +13

    This would be awesome for the hobby train crowd, having micro automated cars

    • @stuckatprototype
      @stuckatprototype  2 місяці тому +3

      I have an n-scale model rail road. its slightly visible in the shots when making the car :) and I have thought about it! maybe one day ill venture that path again

  • @Aari0masdi
    @Aari0masdi Місяць тому

    Subscribed thank you very much sir for outsourcing this fun project ❤ I appreciate your time spent on it
    Cheers from Saudi

  • @vV-Original
    @vV-Original 2 місяці тому +2

    Cool!
    Eagerly waiting for your next project!

    • @stuckatprototype
      @stuckatprototype  2 місяці тому

      Thank you so much! I have really cool plans for next project :)

  • @MatthewBHoth
    @MatthewBHoth 2 місяці тому +1

    Thank you.
    I originally wanted to share a long comment but that'd just be a fancy way of saying thanks.
    Can't wait to see your channel grow. No doubt you'll be back in a year with another cool kickstarter if you want, this time with an audience that will market for you!

    • @stuckatprototype
      @stuckatprototype  2 місяці тому +1

      Thanks so much!! I do not plan on having a kickstarter any time soon. If I can make a living one day making projects and sharing them with the world, oh man. thats a dream come true. I wish to expand my lab and to dedicate my full days to working on cool projects like this one. for now, its only a night time and weekend ordeal! one day -- I hope! Thanks so much for your support!

  • @bluescorpian
    @bluescorpian 2 місяці тому +146

    I am confused on what the purpose of the AI is for detecting the different colors? Could this not have been achieved with basic color thresholding, perhaps even YCbCr?

    • @floride793
      @floride793 2 місяці тому +17

      Yeah i though the same, something like a conversion from RGB to HSV (where Hue is the only wanted value)

    • @eigenman2571
      @eigenman2571 2 місяці тому +21

      Lighting conditions!

    • @jojodi
      @jojodi 2 місяці тому +16

      Even with lighting conditions you can adjust the lookup based on light detected outside a magnetic area. Okay and even if there were a neural net there it has three scalar inputs and a max of what like 5 perceptions max? lol. Whatevs still a really cool project 😀

    • @MrVlogie
      @MrVlogie 2 місяці тому +8

      This would be a perfect place to just use the euclidean distance. There are even already some nice arduino libraries for it

    • @stuckatprototype
      @stuckatprototype  2 місяці тому +56

      yes! definitely could! but it was a really good excuse to learn more about neural networks! :) for the kickstarter, I had a simple range checking, problem came down to lighting. but definitely could have used a different approach! this approach was a bit more fun ;) plus... I like to complicate my life haha

  • @nym7973
    @nym7973 2 місяці тому

    Slammed the subscribe button before even hitting play. This looks epic. Good on you for sharing with everyone, it helps keep the maker world going round.

  • @goosenp
    @goosenp 2 місяці тому +4

    Awesome project, thank you for open sourcing it!
    You might be able to print the wheels using FDM with a 0.2mm nozzle

    • @stuckatprototype
      @stuckatprototype  2 місяці тому +1

      thanks for the support!! the biggest problem with my printer is the precision. the circle was more of a octagon! one day, if I am able to make money from this I will be pouring it all into my lab! I have so many cool ideas I want to make, I cannot wait to share them!

    • @ized88
      @ized88 2 місяці тому

      you probably could get it working with an 0.4 on a good printer like an bambu.
      Espacially if the wheels get modified to take o rings, than it wouldn't even matter if it isn't 100% round :)

  • @iotan09
    @iotan09 Місяць тому

    You deserves tons of subs!
    Sir, i'm really appreciate what you done, thanks a lot

    • @stuckatprototype
      @stuckatprototype  Місяць тому

      Thank you for the kind words! I really appreciate it!

  • @paulroberto2286
    @paulroberto2286 2 місяці тому +5

    Your channel name speaks to my soul :D

    • @stuckatprototype
      @stuckatprototype  2 місяці тому

      thank you!!! love this, and makes me want to keep going more than ever!

  • @HSNDIY
    @HSNDIY 2 місяці тому

    Really cool project and fantastic presentation. I am so sorry to hear that it failed with Kick starter. You are exceptional!!

    • @stuckatprototype
      @stuckatprototype  2 місяці тому

      Thank you! I'm glad you like it! It's been an awesome journey! Thanks for your support :)

  • @TylerLemke
    @TylerLemke 2 місяці тому +11

    super cool. I hope you get a million views. Thanks for sharing this! I want to make some for my family!

    • @stuckatprototype
      @stuckatprototype  2 місяці тому +1

      I really appreciate that! I hope you enjoy it! and if you make it I hope you share it :)

  • @himadri_asmitganguly
    @himadri_asmitganguly 2 місяці тому +1

    demn underrated channel bruh.. what a production quality... love ya .. subscribed .. love to support ya r work.. Me being a soft dev I kknow the pain in ass for Apps and software maintainence

    • @stuckatprototype
      @stuckatprototype  2 місяці тому +1

      Thank you so much! I'm glad you liked it! And maintenance is the reasons all the apps I did in the past are no more!

  • @randallyoung6715
    @randallyoung6715 2 місяці тому +2

    Wow, what black belt skills you have, I would love to see a video about your production/prototype setup. Seems like you got everything very well selected.

    • @stuckatprototype
      @stuckatprototype  2 місяці тому

      Thanks so much! I am going to make some more shorts about my lab, so much to show and tell. I have been slowly building it up over the last 15 years :)

  • @Robotsreloaded
    @Robotsreloaded 2 місяці тому +2

    Awesome project! Imagine adding a tiny camera to this car and having a vision through fpv goggles. It would be a hell of a multiplayer racing game!
    Also the colour detection and actions based on that is great! I would recommend cutting them in shapes more relevant to what function they provide. The oil splash is already a perfect shape for slow down, but for boosters maybe cut it is double forward arrow shape and ring shape for the spin-out green, so that the players can clearly visualize what they are running over :)

    • @ized88
      @ized88 2 місяці тому +1

      The spinout green is looking like 3 green bananas with too little details :)
      But yeah for boost i would go yellow arrows or red flames, too

  • @ChaonicMew
    @ChaonicMew 2 місяці тому +4

    This is AMAZING. Dude, you're criminally undersubscribed. I thought you had at LEAST 60k subscribers with the quality of video and topic.
    Make it big, I'm on board for this!

    • @stuckatprototype
      @stuckatprototype  2 місяці тому

      Thanks so much! it means a lot to me! I am super excited with the way its going, I absolutely did not think I would be getting this much attention. Thanks so much for your support!

  • @koen5905
    @koen5905 2 місяці тому

    It's crazy that this channel only have one video. Can't wait to see more of these in the future!

  • @afghitman
    @afghitman 2 місяці тому +4

    Dude where have you been hiding, I love your content and style!

    • @stuckatprototype
      @stuckatprototype  2 місяці тому

      I was playing the most extreme game of hide and seek hahaha. thanks so much for the support!!

  • @RobM8945
    @RobM8945 2 місяці тому +1

    Fantastic project!! Thanks for sharing with us. This has got the creative juices flowing, my grandson is going to be gobsmacked.

    • @stuckatprototype
      @stuckatprototype  2 місяці тому

      I'm glad you enjoyed it; that's the purpose of this video! :)

  • @mskiptr
    @mskiptr 2 місяці тому +4

    What a cool project! You should submit it to the OSHwA directory

    • @stuckatprototype
      @stuckatprototype  2 місяці тому +1

      I didnt think about this. Love it! I will! glad you like it!

  • @perspectivex
    @perspectivex 2 місяці тому +6

    nice. It would have helped to have shown the segment @11:10 at the beginning of the video. I had no idea the entire time what differentiated this rc toy car from the hundreds of other similar ones out there.

  • @micahw5970
    @micahw5970 2 місяці тому

    I would have 100% thought that this was a huge channel I somehow missed if it weren't for the other comments giving the truth away. I'm happy I found you as soon as I did, especially considering that you're definitely going to blow up if you maintain this level of quality. My mind is already racing with additions that the open sorce community could make. Such as a finish line/lap counter, ofcorce custom shells, and a way for the cars to communicate with and locate each other for combat, kinda like in anki overdrive. I definitely plan to keep up with this project in the future. Thanks for making this project opes source.

    • @stuckatprototype
      @stuckatprototype  2 місяці тому

      thanks so much! I am humbled by how positive the community has been! i never expected this to blow up this much! and yes! I am super excited to see where others take this. super fun

  • @HSSVSR
    @HSSVSR 2 місяці тому +18

    Nice but using a neural network for colour classification is such an overkill. There are existing metrics that would give optimal results.

    • @stuckatprototype
      @stuckatprototype  2 місяці тому

      100% overkill and you are right! It was really fun to learn though!

    • @d3str0i3r
      @d3str0i3r Місяць тому

      eh, it depends how you define optimal, the neural network lets you adjust what color it's working on without editing any code, by training it in the environment you plan to use it in, so that instead of looking for an estimated color you programmed it to look for, it's looking for a color it found in the environment

    • @HSSVSR
      @HSSVSR Місяць тому +1

      @@d3str0i3r the definition of optimal is unique. There is a direct formula for it. You can adjust it for your colours more easily than you would adjust the network.

  • @votrungchi
    @votrungchi 2 місяці тому

    I'm checking the channel right away and can't believe it's a new channel. Great work!

  • @LouisHuemiller
    @LouisHuemiller 2 місяці тому +3

    Looks interesting. I'd like to get started by building one or two for myself, but I'm having difficulties figuring out the exact parts to order. For example, what is the part number for the motors? A complete Bill_Of_Materials/Parts_List would be useful. Also, consider providing as a PCBWay project. That way I can easily order bare boards or partially assembled boards. I'd also be able to select an option where the author gets 10%.

    • @Glycheer
      @Glycheer 2 місяці тому

      I'm also stuck on which exact parts to order, Seems like it'd make most sense to make 5 right? as that's usually the amount of pcb's you get when ordering?

    • @stuckatprototype
      @stuckatprototype  2 місяці тому

      I added a bom :) also that’s a really good idea. I’ll look into it!

  • @KieranBond
    @KieranBond 2 місяці тому +1

    UA-cam recommended this channel and with 13.3k subs at the time of writing, to know this is your first video is amazing, great content keep it up bud. Earned a sub from me ❤️

  • @miked5444
    @miked5444 2 місяці тому +11

    3:15 My pkcell...

  • @dariovicenzo8139
    @dariovicenzo8139 2 місяці тому +2

    3 idea for videos
    1. An extended version of this one, with details on pcb, etc.
    2. Your home pcb machine, pro and cons with examples.
    3. Use and example of 1 pixel color sensors.

    • @stuckatprototype
      @stuckatprototype  2 місяці тому

      thanks for the ideas! :)

    • @hemtic
      @hemtic Місяць тому

      @@stuckatprototype Yes curious about the home pick and place

  • @redregar2522
    @redregar2522 2 місяці тому +8

    I look your video over 1:30 and still don't know what's your project about. Would be cool if you could give and introduction.

    • @Skaffa
      @Skaffa 2 місяці тому

      did you read the description?

  • @m1raclemaxsax
    @m1raclemaxsax 2 місяці тому +1

    Major major respect for open sourcing, this is amazing

    • @stuckatprototype
      @stuckatprototype  2 місяці тому

      thank you!!! it actually took a lot of weight off my shoulders! Its now finally after a long time a success instead of a failure! :)

  • @Arek_R.
    @Arek_R. 2 місяці тому +7

    Hey man what's that pick n place machine you've got there 1:00?

    • @stuckatprototype
      @stuckatprototype  2 місяці тому +3

      CHM-T36 :)

    • @Arek_R.
      @Arek_R. 2 місяці тому

      @@stuckatprototype Why this random Chinese creation instead of some open source machine.

  • @MaskedMarble
    @MaskedMarble 2 місяці тому +1

    Why do you need a neural net to identify colors? Just set a range for each color value.

  • @ewasteredux
    @ewasteredux 2 місяці тому +5

    Reminds me a little of Zip Zaps

  • @ondrejkozak3308
    @ondrejkozak3308 2 місяці тому

    Congrats on the success of the video and the rapid influx of subs. All well deserved as this is an incredible project. A kind of wish come true to me as I wanted to make a mini rc car for my kids. I have even picked out the same tiny gearbox motors and of course esp32 😂 Not a ML model for the color sensing though 😅 Anyway cannot wait to make this - thanks for open sourcing the project truly an awesome move 🎉

    • @stuckatprototype
      @stuckatprototype  2 місяці тому

      thanks so much for the kind words! I hope you do make one! I would love to see it :)

  • @FlakAttack0
    @FlakAttack0 2 місяці тому +12

    What is that machine at 0:36?

    • @az6433
      @az6433 2 місяці тому +19

      Pick-and-place robot that places all the small components on the PCB.

    • @bites.jtv.4
      @bites.jtv.4 2 місяці тому

      ua-cam.com/users/shortsuDh0vNSRmwE?si=MEWiH2Tw0QqZk8Tv

    • @FlakAttack0
      @FlakAttack0 2 місяці тому +3

      @@az6433 Oh I guess I should have asked which pick-and-place it was but I ended up on an adventure looking at home options and ultimately that's a bit outside of my current price range. I mean I'm not facing that kind of bottleneck anyway but it would have been neat to have.

    • @claybford
      @claybford 2 місяці тому +2

      There are ways/options for P&P that are cheaper but still helpful, like little vacuum tools and vacuum tools on a gantry

    • @SmokyFrosty
      @SmokyFrosty 2 місяці тому

      Looked at Lumen PNP? Or is it called Opulo now? Not 100% sure. ​@@FlakAttack0

  • @jonathanturner8117
    @jonathanturner8117 2 місяці тому

    Really enjoyed the video! Would love to see all the different tools you have at your office, looks like a hobbyist's wet dream lol. Definitely earned a new sub! :)

    • @stuckatprototype
      @stuckatprototype  2 місяці тому

      hahaha I still don't have half the things I like. Thanks for the support!

  • @kevingoble3227
    @kevingoble3227 2 місяці тому +7

    Magnetic switch is divine inspiration

  • @lomzart
    @lomzart 2 місяці тому +1

    Great video! Please just keep on doing more of this, your first video is top notch. Big thanks for sharing!

    • @stuckatprototype
      @stuckatprototype  2 місяці тому +1

      Thanks! I have a lot of fun ideas I want to make and share! :)

    • @lomzart
      @lomzart 2 місяці тому

      @@stuckatprototype I'm so eager to see what's next!

  • @2brokegirls2025
    @2brokegirls2025 2 місяці тому +3

    please somebody make the same but for hotwheels body.

  • @mrnlce7939
    @mrnlce7939 2 місяці тому

    I would have said it was more like Super Sprint than Mario Kart. But I'm old and many people don't know what Super Sprint is.
    Great video. Keep up the good work.

  • @Eriiiiiiiick
    @Eriiiiiiiick 2 місяці тому +7

    You can do it

  • @xSheinx
    @xSheinx 2 місяці тому

    I have somewhat basic ideas of coding, no idea of how to make the board, a friend that has a 3d printer and I want so bad to try this.
    Awesome project and video editing. Nice personality too!
    Keep on going, dude!

    • @stuckatprototype
      @stuckatprototype  2 місяці тому

      It’s a really rewarding experience to build!

  • @JacksHQ
    @JacksHQ 2 місяці тому +3

    This guy is such a gigachad for open sourcing this. You dropped this, king. 👑

  • @zpinacz
    @zpinacz 2 місяці тому

    I would love to finish watching this video (not even dreaming about actually putting such a toy for my kids to play with), but I am stuck with my own software prototypes... great content btw, bye! :)

  • @Blorvax
    @Blorvax 2 місяці тому

    Such a great work, stumbled across your video and can't stop myself from watching it till the end

  • @Sanchees3
    @Sanchees3 2 місяці тому

    This was such an awesome watch, looking forward to learning from your project files !!

    • @stuckatprototype
      @stuckatprototype  2 місяці тому +1

      Glad you enjoyed it! I hope it inspires you to do some awesome projects too! and my files are not perfect, but in the end, I am StuckAtProtype ;)

  • @CotyCondry
    @CotyCondry 2 місяці тому

    great video, and it's fun to see a channel blow up in real time. cheers!

    • @stuckatprototype
      @stuckatprototype  2 місяці тому

      Thank you so much! It's been a wild ride, and I can't believe this has been so well received :)

  • @JoePelusoMedia
    @JoePelusoMedia 2 місяці тому

    Seriously incredible! Glad the video is doing so well and damn over 10k already! Looking forward to the next one for sure

    • @stuckatprototype
      @stuckatprototype  2 місяці тому

      Thank you! I have lots of fun ideas lined up and cannot wait to share them! thanks so much for the support!

  • @nitishc4
    @nitishc4 2 місяці тому

    Wow! The sound design is so good, I would be apalled if you told me you just put it in the background start to end on loop. Great first video!