Top Performances 86cc Unbox
Вставка
- Опубліковано 15 жов 2024
- Unboxing Top Performances 86cc cylinder kit + 44mm stroke crankshaft for AM6 engines.
Kit includes:
Top Performances 86cc cylinder
50mm 1-ring piston
Modular cylinder head
Top Performances 44mm stroke crankshaft
Top Performances C3 bearings
Small End bearing 12x15x15mm
Gaskets and seals
32mm and 28mm exhaust flanges
and other adapters, screws and bolts
The cylinder has 5 transfer ports (130°) and bridged exhaust port (190°).
On Maxiscoot's page they say that the cylinder can, without any tuning and tinkering, get up to 24/25hp.
Upcoming setup:
Top Performances 86cc cylinder kit
Top Performances 44mm stroke crankshaft w/ TPR C3 bearings
Most 70/80 2017 exhaust
MVT Digital Direct ignition
30mm Sunworld PWK
Most 30-34mm intake manifold
Most 10mm intake manifold spacer
Malossi E16 air filter
Stage6 V-Force reed valve
Stage6 Carbon clutch
BR9ES spark plug
14*53 gearing
Song: Ivan B - The Jump (feat. Abstract)
Can I ask about the jetting ? What jets to run to be safe and not destroying the kit?
Is top performances same as tpr?
yes tpr= top performance racing
Power!!
Oispa.
an airsal xtrem 88 is better or brk4race ...
@@lametraserillos1 86 has way better quality and has quite a bit more torque than 88cc
Itelle tulee aika samallainen setuppi syksyllä🤘
Noni 👍
Sande mikä putki on sit setupis? Onks viel Most 70-80 2017, ja paljo se makso ku ajattelin ostaa, vai oisko yasuni r3 parempi?
osta mielummin voca ku yasuni tai metrakit pro race
Jonku aikaa ajan viel tol mostil mut myöhemmin hommaan jonku toisen ja se makso siis 329€ Scootfastilt. Ite suosittelen tolle setupille Most 80-90cc, Yasuni R4/R3 ja Voca 90cc.
Sande juu, pystytkö myymään 75tpr?
When does the project/ showing the bike with Tpr 86 video release?
This spring/summer when I get to ride it again.
@@SandeProd Great!
Hello! Whats the size of the SKF C3 bearings? I have the same kit, but I have to buy new bearings and I dont know the size! PLEASE help :) Thank you!
I'm not sure because I don't remember. I think it was 6303 and the other was 6204. I'm not sure though.
I searched it for 2-3 hours and I got it. Its 6303 TN9 C3, but its plastic "case" bearing. Today I bought it, but its steel case. Thank you for you reply! Sorry for my bad english, Im from Hungary! :D
@@vbarna4012Dik a magyar XD 😅
What gearing do you have #greetingsfromsweden
14-53. 🤘
do you recommend Stage6 vforce?
The reeds broke twice when I had them on my 86cc TPR setup. Then I bought KTM SX 65 reeds for it and they worked perfectly. I would rather consider TPR V-force or the KTM SX 65 reeds.
@@SandeProd i bought the original ones from moto tassinari. Its the ones that goes on am6 so hopefully they will be better then my broken malossi vl6 ;)
Can I build this on cpi?
As it is also am6 motor?
Keestäkö kaua tiilata maxiscootilta??
3-5 päivää.
kiitos
Viides päivää ei ole viel tullut mitää
joskus kestää vähä pidempää mut se ei oo kaupan vika vaan postin :)
Do you have modyfied crank cases?
Yes.
Sande what’s it modified with?
Jeejee olin tuhannes tilaaja
Eiks 28mm kaasari pelitä tänkaa iha hyvi
Pelittää ihan mainiost.
Menikö sylinteri ilman modausta kiinni?
Menee ilman modauksia.
Veri nice ✌😋
paljon oli huiput 70cc kaa tolla tekniikalla ku itel on 70cc atheana.
70cc kans 13-53 väleil tais mennä jotaa 110.
Ok
Mistä toi 30-34mm imukaula on?
Ja toi most "läppäkoro"
Scootfast.com
Sande kiitti
ON
On
Tehoo
what carburetor?
are u going to use*
30mm Sunworld PWK
Millon ajovideoo tost?
Heti ku saan tarpeeks kuvamateriaalii nii väsään jonku videon.
Juu, mitkä läpät tos on
Stage6 V-Forcet.
Detsivideoo kiitos
Tänä vuon ei enää kerkee. Kevääl tulos, ihan vitusti.
Please update
New videos coming this spring.
milloin vidii?
Ku lumet sulaa ja pääsee kuvailee
@@SandeProd onko poliisinkaa ollu hutikalla ongelmii
Eihän tääl nyt mitää sellasii
Koska tullee uutta viteeoo
Sitte ku jaksais kuvailla. Nyt ei millää riitä aika eikä motivaatio.
Fobat tykkää
Milloin ajo videoo
Heti ku kaikki osat on tullu ja tekniikka kasas eli noin 2 viikkoo.