(Upgrade) OMTech 80 watt Laser Cutter, Air Assist install
Вставка
- Опубліковано 26 сер 2024
- Hello all!
Today i will show you how i did my (Upgrade) OMTech 80 watt Laser Cutter, Air Assist install! It is not very dificult and only takes about an hour...
Parts list below. THANKS for watching!
Solenoid.. smile.amazon.c...
Regulator.. smile.amazon.c...
Tube kit.. smile.amazon.c...
Elbow.. smile.amazon.c...
Wire.. smile.amazon.c...
Power strip.. smile.amazon.c... - Навчання та стиль
Great Video. I am interested in the power strip but the link you posted is a duplicate for the wire. Please comment the updated link. Thank you!
Thanks. Fixed... And THANKS FOR WATCHING!! smile.amazon.com/dp/B097JGGJTW?psc=1&ref=ppx_yo2_dt_b_product_details
would these instructions work on the 60 watt omtech? clearest video ive found, but diff machine....
It should, it is really just a switch.. I can not say for sure, but IDK how they could be different. Does your controller look a=the same?
@@sunriseadventures5459 ya it does. Thank you
I understand from reading and watching other videos that you (I) need to have low pressure airflow (about 5 psi) flowing whenever the laser is running to keep dust, smoke and residue off the lens so it stays clean and when engraving to help clear smoke from the engraving area and reduce the smoke residue.
With your setup I'm curious how you get that low pressure airflow without having a second solenoid or bypass valve?
I just turn down the regulator, the knob on the top lets you adjust it.
Hi, i have a question i seen other videos sayin to use 16 gauge and other other to use 18g. I bought everything to upgrade mine. I got a 18g. But is so confusing seen different ppl saying 16g or 18g. And i see on your list an 18g. Is that the right one?
IMO, it will not matter.. Not that much draw..
Amazon is out of the regulator... do you have another suggestion for that part?
Just make sure it has a bleed and the correct threads... I will look when i am home. And THANKS for watching!