Thank you for all these super digestible videos on every aspect of this hobby. You really are quite a valuable asset to the community. If you ever need an idea for a video, I would love to see an update on this video including the new Airport and the MavLink-RC features.
Lee: Another great video! Thank you for covering the gotchas in detail and for repeating the key issues, especially that there are 2 different ELRS vs Express LRS firmware choices to match versions of the software (2.0). Excellent videography & audio. Keep up your great work!
Hello, I am new to ELRS, I have the Radiomaster TX16s mkII , happy model tx24 pro module and a betafpv elrs lite receiver. I managed to get the module flashed to 3.01 and the receiver flashed via wifi to the same, I did include a binding phrase. When I power cycled after flashing the rx goes into a super fast blink immediately when powering up, I am also unable to bind to it. Any idea? I am at my wits end. I do have another receiver on the way just in case...
Great video on this topic. Unfortunately during flashing to the latest version via Wifi, I bricked that 5Ch receiver. I know there is a device available to unbrick those nano and other receivers. But no manual how to do that with this receiver. Do you have an solution for this? Thanks anyway.
@@Painless360 Thank you Sir. For me in Canada it is probably cheaper to just buy another receiver than buying that unbrick dongle from BetaFPV if it even would work. But still it would be nice to recover the bricked one. Cheers.
Hi I have a question about Receiver in INAV My RX already binded with my TX (signal shows in TX, led light, sound if Telemetry lost or recovered) But INAV didnt detect the movement in my TX
Sounds like the bind is good but the connection or/and setup in INAV is wrong. See my INAV for beginners series for how to setup the Rx for SBUS and CRSF..
@@Painless360 it's the happymodel 2 in 1 Vtx and ERLS Rx. I'm so stumped with this. I've installed these receivers in 8 models so far and have never had this issue. I'm starting to think it's these happymodel 2 in 1s.
That is odd, I can't see anything about double flash when connected in the manuals for it or on the ELRS site.. If you get an answer, please let me know.
Hey great video! just stuck on what you mean that the binding phrase is set the same on BOTH TX and RX? i know i can flash the binding phrase onto the RX but how do i set the binding phrase on the TX controller? i have a TX16S Thanks a lot!!
Thanks Lee. I did setup this receiver but couldn’t get the servos to move for some reason. Didn’t investigate it enough. I’ll try again and let you know. I finally became a patron today :) it’s way overdue. Great work.
Only if that model provides support for an additional ExpressLRS reciever. I don't expect that it will easily. DJI only want owners to buy and use their stuff... Best of luck
I have the betaflight rx and tx module on my tx16s MK2 updated both. Installed rx in airplane and it went through binding process flawlessly. Took it to the field and flew the airplane. Following weekend took it back out to the field and nothing. Just a blinking blue light. This mess is so frustrating
I got a question, do you have to flash the TX 16s radio or the elrs receiver when new? Or can you just get the stock version of each and just bind and fly?
I had a problem with Matek 2.4 receivers - after flashing from "configurator" or "web page", receiver was constantly rebooting (connect it with USB2UART, then open "serial console" in configurator, if it shows "faults", dumps lot of garbage and uC registers) - what helped was a flashing tool i've found on Matek's page "ESP_NodeMCU-PyFlasher.exe". I've selected "clear eeprom" or similar option (erase flash, do not remember now) and flashed elrs. It seems that original firmware has different configuration area (size or actual parameters) that are not picked up by new version, and ELRS Configurator is not clearing it by default. I had same problem with both - ELRS-R24-D and ELRS-R24-S.
My HappyModel module has 2.0 and the BetaFPV RX I got are on 1.0 Do I flash the RX to 2.0 or downgrade the TX to 1.0??? Or will they bind without being on the same?
Mine didn't have one. Non mentioned in the manual either - support.betafpv.com/hc/en-us/articles/4404231679129-How-to-Flash-Firmware-of-ELRS-RX-TX - I'd get onto the seller.. Best of luck!
When I plug my battery into my drone there's like a tiny spark happens inside the plugs (xt60? Its nazgul 5hd with 6s fullsend battery). Is this normal? Should I just plug it in faster to avoid it or am I making a mistake? Am I going to ruin my first drone vrand new and expensive af before I even get through the complicated "bind and fly" process of downloading and updating dozens of software and updates? Who knows 😮💨
I was hoping you can help me, I was able to bind my rx but I cannot get ch2 to work..: I’ve verified the servos all work, adjusted and made new models in my zorro and ch2 whether it’s ele or rud it won’t send a signal while the other 3 work great
Check that you can see that channel moving on the radio ok, then move one of the known good servos to that output. If still no joy, check that the PWM output with the issue has power... Best of luck!
Does anyone know why while trying to connect to my rx wifi am forced to enter a password for the network? Since my tx uses elrs v3 I need to update but cannot access the pages to update it
Another "gotcha" to add to the list: I was getting stuck at the Lua script "Loading..." stage. I needed to remove existing Yaapu scripts that were already loaded to get ExpressLRS script to load. I guess you can only have one or the other.
Great video Lee. Looking for steps for changing channel 5 to 6 in expresslrs so it works with Kopilot for mode switch, since Channel 5 is only 2 position and need 3 for kopilot. Also have you tried the Matek CRFS to Sbus for elrs and if so same issue, How to change channel 5 to 6 for mode switch.. HELP please. Thanks in advance for any help or suggestion. Have a great day
Make sure your default gateway router is not set for 10.0.0.1 as mine was because the RX web page won’t come up. I had to re-ip my router to 172.16.0.1 for it to work.
Hi, this has been soooo helpful because i mistakenly bought the Radiomaster tx12 Mk2 elrs version for my 3D and sports planes.. SO now I'm so relieved i can still use it. Question though: can I use the 5th channel as the slave of the 1st (aileron) for a 2-servo aileron setup without adverse effects?
At the moment the 5th channel needs to be 'high' to enable all of the features you want 'on' when flying. You can remap the other channels on the Rx so that CH5 isn't wasting an output.. See ua-cam.com/video/3-l7mEklEY4/v-deo.html
I've got the built in elrs model radio that looks like yours. Jb edition. I'm getting errors when trying to flash(I guess that's what I'm doing) my radio using elrs configurator. Unfortunately I can't read code so I have no idea what these errors mean. It suggests that I upload a screenshot of the data log to a discord server lmfao now that's quality design/user interface right there 🤦👌
Good info mate. Don't forget the bind process. Most newer elrs receivers can enter the bind phrase be powering on and off the FC 3 times in quick succession. This will force the FC to enter bind mode. Don't bother typing bind_rx into the CLI of betaflight....this simply wont work. Also make sure that the ELRX RX firmware is the sameas the ELRS TX firmware. If not then they will also not bind.
It's getting a bit confusing. Why all the "jumping through hoops" to just fly an RC airplane????? It's not a 787 with people on board. It's just a tiny plane. OpenTx is looking better every time I watch one of these videos. So I will stop watching them.
It would be worth mentioning that binding is a really uncommon thing to be doing in ELRS. Setting a binding phrase while flashing makes this whole process unnecessary.
Thank you for all these super digestible videos on every aspect of this hobby. You really are quite a valuable asset to the community. If you ever need an idea for a video, I would love to see an update on this video including the new Airport and the MavLink-RC features.
One planned as the next version has some big MAVLink changes coming... stay tuned!
Great Vid, I love my ELRS stuff. Radiomaster TX16S/EdgeTX/ELRS/Arduplane/Matek and a PC. Happy days to be FPV'íng for sure.
Excellent, Lee! Thanks a lot! 😃
Stay safe there with your family! 🖖😊
Complimenti! Sei una incredibile risorsa!!!
Thanks for your vid. The model match info is what I needed.
Lee:
Another great video! Thank you for covering the gotchas in detail and for repeating the key issues, especially that there are 2 different ELRS vs Express LRS firmware choices to match versions of the software (2.0). Excellent videography & audio. Keep up your great work!
V3.0 is just out now too... happy flying
Hello, I am new to ELRS, I have the Radiomaster TX16s mkII , happy model tx24 pro module and a betafpv elrs lite receiver. I managed to get the module flashed to 3.01 and the receiver flashed via wifi to the same, I did include a binding phrase. When I power cycled after flashing the rx goes into a super fast blink immediately when powering up, I am also unable to bind to it. Any idea? I am at my wits end. I do have another receiver on the way just in case...
Excellent video Lee
I flashed my radio to the newest firmware. How can i tell what version my drone is on? They are both ELRS
Let the ELRS reviever go to WiFi and connect to it with your PC. Version information is there... Best of luck
Great video on this topic. Unfortunately during flashing to the latest version via Wifi, I bricked that 5Ch receiver. I know there is a device available to unbrick those nano and other receivers. But no manual how to do that with this receiver. Do you have an solution for this? Thanks anyway.
I'll add it to the list of things to investigate.? Stay tuned!
@@Painless360 Thank you Sir. For me in Canada it is probably cheaper to just buy another receiver than buying that unbrick dongle from BetaFPV if it even would work. But still it would be nice to recover the bricked one. Cheers.
Hi I have a question about Receiver in INAV
My RX already binded with my TX (signal shows in TX, led light, sound if Telemetry lost or recovered)
But INAV didnt detect the movement in my TX
Sounds like the bind is good but the connection or/and setup in INAV is wrong. See my INAV for beginners series for how to setup the Rx for SBUS and CRSF..
hi thank you so much
I want to inform you that your guess is correct
you are amazing!
the wire connection is a bit loose@@Painless360
what does it mean when it doesn't go solid and blinks 2 in a row. But you still get telementery?
What receiver and version?
@@Painless360 it's the happymodel 2 in 1 Vtx and ERLS Rx.
I'm so stumped with this. I've installed these receivers in 8 models so far and have never had this issue. I'm starting to think it's these happymodel 2 in 1s.
That is odd, I can't see anything about double flash when connected in the manuals for it or on the ELRS site.. If you get an answer, please let me know.
Great walk through.
Thank-you.
Hey great video! just stuck on what you mean that the binding phrase is set the same on BOTH TX and RX? i know i can flash the binding phrase onto the RX but how do i set the binding phrase on the TX controller? i have a TX16S Thanks a lot!!
You must have the same binding pphrase on your ELRS TX external module
Thanks Lee. I did setup this receiver but couldn’t get the servos to move for some reason. Didn’t investigate it enough. I’ll try again and let you know. I finally became a patron today :) it’s way overdue. Great work.
Would this reciver work with DJI naza lite? Looking to get more rang and upgrade
Only if that model provides support for an additional ExpressLRS reciever. I don't expect that it will easily. DJI only want owners to buy and use their stuff... Best of luck
I have the betaflight rx and tx module on my tx16s MK2 updated both. Installed rx in airplane and it went through binding process flawlessly. Took it to the field and flew the airplane. Following weekend took it back out to the field and nothing. Just a blinking blue light. This mess is so frustrating
www.expresslrs.org/2.0/quick-start/led-status/
I got a question, do you have to flash the TX 16s radio or the elrs receiver when new?
Or can you just get the stock version of each and just bind and fly?
Binding will normally only work if both the radio and receiver are on the same major version of ELRS.. Best of luck.
I had a problem with Matek 2.4 receivers - after flashing from "configurator" or "web page", receiver was constantly rebooting (connect it with USB2UART, then open "serial console" in configurator, if it shows "faults", dumps lot of garbage and uC registers) - what helped was a flashing tool i've found on Matek's page "ESP_NodeMCU-PyFlasher.exe".
I've selected "clear eeprom" or similar option (erase flash, do not remember now) and flashed elrs. It seems that original firmware has different configuration area (size or actual parameters) that are not picked up by new version, and ELRS Configurator is not clearing it by default. I had same problem with both - ELRS-R24-D and ELRS-R24-S.
My HappyModel module has 2.0 and the BetaFPV RX I got are on 1.0 Do I flash the RX to 2.0 or downgrade the TX to 1.0??? Or will they bind without being on the same?
Update the reciever to version 2.x and it should all work... Best of luck
@@Painless360 Thank you so much for answering!! I could find lots of other info except that 1 thing.
When I click the Lua script it just keeps loading. You have any idea on why that might be?
CRSF not setup. See my video on adding ExpressLRS to an RC car I shared recently... Best of luck
@@Painless360 thanks! 🙏🏻
my receiver asks for a network security key when i try to connect to it via wifi, do you know what the key would be, r how i can find it?
I've not had one here with that enabled. Which one do you have?
@@Painless360 It's the receiver you have in this video; It's a Betafpv 2.4gHz ELRS receiver. I got it from unmanned tech shop.
Mine didn't have one. Non mentioned in the manual either - support.betafpv.com/hc/en-us/articles/4404231679129-How-to-Flash-Firmware-of-ELRS-RX-TX - I'd get onto the seller.. Best of luck!
@@Painless360 Ok, Thank you.
When I plug my battery into my drone there's like a tiny spark happens inside the plugs (xt60? Its nazgul 5hd with 6s fullsend battery). Is this normal? Should I just plug it in faster to avoid it or am I making a mistake?
Am I going to ruin my first drone vrand new and expensive af before I even get through the complicated "bind and fly" process of downloading and updating dozens of software and updates? Who knows 😮💨
I will make a video on this. Don't worry it is normal... Happy flying
ua-cam.com/video/JGGWoH7rXsQ/v-deo.html :D
Where's the link to the configurator?
www.expresslrs.org/3.0/quick-start/installing-configurator/
I was hoping you can help me, I was able to bind my rx but I cannot get ch2 to work..: I’ve verified the servos all work, adjusted and made new models in my zorro and ch2 whether it’s ele or rud it won’t send a signal while the other 3 work great
Check that you can see that channel moving on the radio ok, then move one of the known good servos to that output. If still no joy, check that the PWM output with the issue has power... Best of luck!
@@Painless360 I didn’t check if it has power but I mapped it to the 5th pin and that worked so the ch2 pins I guess are the issue
Sounds like it... Best of luck
ho to cange the frequenci to 868mhz ?
That is set by the hardware, unless you have one of the new GeminiX TX units that can 'talk' both 2.4Ghz and 900mHz...
@@Painless360 i use TX16S radiomaster
Then you'd buy another module for the frequency you need... Happy flying
I have managed to bind it up however none of the motors spin I’m using radio master Zorro
What model type? Using a flight controller? What troubleshooting have you already done?
@@Painless360 it’s an rp1 reciver but the rx wire is soldered to the rx port same with the tx
I still have no idea what you are using. I can't help without that... see ua-cam.com/video/olIqTiSJHIY/v-deo.html best of luck
Does anyone know why while trying to connect to my rx wifi am forced to enter a password for the network? Since my tx uses elrs v3 I need to update but cannot access the pages to update it
ua-cam.com/video/q5qJQu8xT8w/v-deo.html
Thanks for your great video... help me how to enter the binding mode successfully...
mine is not going in bind mode
What have you tried already?
@@Painless360 yeah I did the power on and of 3 times but did not work I tired like 20 times
Best of luck with it. When asking for help including things like the hardware you are using and exactly what you've tried can help. Best wishes.
@@Painless360 it worked!! Now the other challenge is how to mix channels for the flaps or the alerons
I've got lots of videos on things like that. Best of luck!
This is what I needed. Thanks for sharing this. Love your content!
Another "gotcha" to add to the list: I was getting stuck at the Lua script "Loading..." stage. I needed to remove existing Yaapu scripts that were already loaded to get ExpressLRS script to load. I guess you can only have one or the other.
How odd. I have both here working OK. Maybe it's a version thing.. Thanks for posting.. Happy flying
If you new to the sport and ELRS this is not easy. Is there a map/ tree of screen to make it easier for a new guy to find where he needs to go..
Check out my ELRS playlist, it covers all of the basics and is designed for newer pilots..
Great video Lee. Looking for steps for changing channel 5 to 6 in expresslrs so it works with Kopilot for mode switch, since Channel 5 is only 2 position and need 3 for kopilot. Also have you tried the Matek CRFS to Sbus for elrs and if so same issue, How to change channel 5 to 6 for mode switch.. HELP please. Thanks in advance for any help or suggestion. Have a great day
In the BetaFPV receiver you can assign the PWM outputs to be any channel you want. On the Matek PWM receiver they don't pinout CH5..
Mesmo usando um receptor betafpv de 14ch, eu só consigo usar 4 saídas como pwm.
Make sure your default gateway router is not set for 10.0.0.1 as mine was because the RX web page won’t come up. I had to re-ip my router to 172.16.0.1 for it to work.
seems like the dev team intentionally messing with you.
Thank you for all the advices 👋
THANKS cheers Painless I am using groud vehicle with beta fpv pwm supper p with MT 12 so I assume its the same thank you bro
Hi, this has been soooo helpful because i mistakenly bought the Radiomaster tx12 Mk2 elrs version for my 3D and sports planes.. SO now I'm so relieved i can still use it. Question though: can I use the 5th channel as the slave of the 1st (aileron) for a 2-servo aileron setup without adverse effects?
At the moment the 5th channel needs to be 'high' to enable all of the features you want 'on' when flying. You can remap the other channels on the Rx so that CH5 isn't wasting an output.. See ua-cam.com/video/3-l7mEklEY4/v-deo.html
@@Painless360 Thanks a lot! Ill try those when the recceiver will arrive from china :)
The problem I’m having is that when I click on ExptressLRS the information doesn’t populate. All I see is the word Loading…
The external RF settings need to be CRSF or it won't be able to talk to the module. Best of luck
I've got the built in elrs model radio that looks like yours. Jb edition.
I'm getting errors when trying to flash(I guess that's what I'm doing) my radio using elrs configurator.
Unfortunately I can't read code so I have no idea what these errors mean. It suggests that I upload a screenshot of the data log to a discord server lmfao now that's quality design/user interface right there 🤦👌
Check out my videos on ELRS. I have a full playlist. Best of luck
Good info mate. Don't forget the bind process. Most newer elrs receivers can enter the bind phrase be powering on and off the FC 3 times in quick succession. This will force the FC to enter bind mode. Don't bother typing bind_rx into the CLI of betaflight....this simply wont work. Also make sure that the ELRX RX firmware is the sameas the ELRS TX firmware. If not then they will also not bind.
Where do i find the wifi password?
The password is expresslrs
Binding is the easiest part. Trying to program the ELRS controller to arm and assigning the buttons is the hard part.
What do you mean when you refer to 'ELRS controller' ? Happy to help if you can explain in a lot more detail what you're trying to do..
@@Painless360 Jumper T Pro Elrs radio. There are no English instructions for programming the switches. Can't even sell it.
If it is powered by EdgeTX or Opentx then check out my videos that show how to use it.. Best of luck
It's getting a bit confusing. Why all the "jumping through hoops" to just fly an RC airplane????? It's not a 787 with people on board. It's just a tiny plane. OpenTx is looking better every time I watch one of these videos. So I will stop watching them.
You can make it as simple or complex as as you want. That's all part of the hobby. Happy flying
It would be worth mentioning that binding is a really uncommon thing to be doing in ELRS.
Setting a binding phrase while flashing makes this whole process unnecessary.
Excellent point. Still relies on same frequency, major ELRS revision and RXNum setup... Thanks for posting.