Elijah Milan thanks for watching! I’ve heard they’re some sort of inserts you can add instead of wrapping around the springs. But I haven’t tested those out since I sold the bike. This should help you out tho.
Elijah Milan that should work as well as some thin wire. Watch the thickness because it’ll be hard to push it back if it’s too thick around that spring.
The next step is arranje onde solution to eliminate the light connector / adapter ... I am thinking of ... cut de wires, remove the original female connector of the motorcycle and put on one h7 female connector...
@@MotoRoUsaThanks-during the daytime do you ride with low or high beam on?I've heard so many different opinions on this one i.e.high beam makes you look 'too close' and shouldn't be used but then others swear by high beam during the day
@@redskies4530 when I had that bike I rode with high beam during the day. Not just for safety but I like to have both headlights on to avoid stupid conversations like “ dude your headlight bulb is out “
william dolezal no I did not have any power commander or fuel controller. Usually since it’s fuel injected the ECU adjusts the fuel and air pretty well.
Fun tip, you can turn the bars full lock to both sides you can reach the back of the headlights without removing the fairings
installed both low and high beam headlights without removing fairings 👍
Easier and more clearance if you do take it off. There’s always ways around doing things tho
I bought the same LED's as these new ones you installed. This should help a lot!
Elijah Milan thanks for watching! I’ve heard they’re some sort of inserts you can add instead of wrapping around the springs. But I haven’t tested those out since I sold the bike. This should help you out tho.
@@MotoRoUsa I think I'm gonna try a liberal application of electrical tape around the existing spring clamps
Elijah Milan that should work as well as some thin wire. Watch the thickness because it’ll be hard to push it back if it’s too thick around that spring.
The next step is arranje onde solution to eliminate the light connector / adapter ...
I am thinking of ... cut de wires, remove the original female connector of the motorcycle and put on one h7 female connector...
Luis R yeah but I didn’t want to do all that and keep it simple
What headlights were these from Amazon?
NINEO H7 LED Headlight Bulbs w/Small Size,10000LM 6500K Cool White CREE Chips All-in-One Conversion Kit
On low beam are both lights on or only one? High beam I know would be both.
Only one side unfortunately. I’m sure you can rig it up so both will turn on with low beam but I haven’t done it on that bike.
@@MotoRoUsaThanks-during the daytime do you ride with low or high beam on?I've heard so many different opinions on this one i.e.high beam makes you look 'too close' and shouldn't be used but then others swear by high beam during the day
@@redskies4530 when I had that bike I rode with high beam during the day. Not just for safety but I like to have both headlights on to avoid stupid conversations like “ dude your headlight bulb is out “
@@MotoRoUsa Thanks and good enough reason there.
No link in the description haha. What lights are they?
C G sorry I will edit it. Here they are NINEO H7 LED Headlight Bulbs... www.amazon.com/dp/B07MNDM185?ref=ppx_pop_mob_ap_share
Most LEDs are not going to make your vision better because thr beam pattern isn't right for the housing
william dolezal it did make a huge difference . The headlights need to be adjusted that’s all. They have a bit of glare but not too bad.
a.aliexpress.com/_dVOthAI
Luis R thanks for the link! It would take about 30 days to get them but it’s worth it i guess .
What exhaust do you have
Juan Jimenez it’s a two brothers exhaust
Did you have to get anything done to your fuel system when you changed the exhaust
william dolezal no I did not have any power commander or fuel controller. Usually since it’s fuel injected the ECU adjusts the fuel and air pretty well.
@@MotoRoUsa how do you think it sounds. Is it louder then the stock
william dolezal yes huge difference. Sounds great
which year is the bike ?
It was a 2009 model