Hi Mic, thank you so much for this video. I've been waiting for you to make this video for a week now! Lol. I've seen it done on other videos but I was just waiting for you to give it the green light jeje. You rule dude. For anyone out there who's affraid of damaging the gimbal with this mod, don't be. This gimbal is a lot tougher than it looks. I've dropped my phantom twice from 80 feet onto concrete, the first time the bottom of the gimbal body took the hit so hard that it pushed the ball bearing into the one of the motors. I managed to bring it out again using a screw driver and a fair amount of force. The second time the main arm bent sideways, again using a fair amount of force I managed to bend it back into place. I've done dozens of flights after both accidents and the gimbal works perfect! So a little bit of force with the dremel is not gonna do any damage. Just make sure you cover the motors properly to avoid fine metal dust from reaching the motors. Happy flying everyone.
Hi Mic, thank you so much for the video. Could you please tell me where can I get that excellent yellow clip on bracket to hold the gopro ti the gimbal please? Thank you.
I need that yellow bar! I keep a gopro on mine, only messed with it twice.. Third time I went to remove camera, the retainer bar broke & the data cable snapped off? Really disappointed in quality in that.. I'm going to try your yellow bar idea.. I generally don't remove it.. But still looks better made than stock retainer .. Thanks again! Love your videos!
I installed my go pro hero 4 on my h3-3d gimbal v2 USB port and seems to fit perfect didn't really notice it pressing the tool button but did notice a significant weight difference on the go pro side so would love to see if you think you need some added weight or if it's not nesseary Mitch make it another gopro tip because I know a lot of ppl looking for this answer
Great mod. Please could you measure the diameter of the lens of your range if go pro. I am interested in the diameter of the plastic or rubber surround that encompasses the lens so the largest diameter not the glass lens itself
Can you use an hero 3 black upside down? Or will this burn out the motors? The lens will then be more in the middle and lower down, so less of the legs and props will be shown in the video.. (I know i can choose horisontal and vertical radius in the program, but thats not the point) Great video by the way:)
What is the difference between sandisk u1 and u3, please help me, I'm going to buy the new gopro hero 4 silver edition and I don't know which one to buy. Thanks.
Hi Mitch love your work! I notice in your latest videos your not using the Shapeways Zenmuse bracket. Any reason for this? Just ordered mine and now worried there might be an issue.
Awesome videos Mic! I have a question for you, hope you can answer. When I use my gopro while hunting, which settings do you prefere? I use 1080p, 30 fps, and wide fov, and the problem is that everything far away (20 meters+) is hard to see. Any tips?
Hello Mic, Thank you for your videos I have a question! I have seen your gopro seems to be turning on the left part when you don't made anything. I have the same issue with the Zenmuse h3-3d. Do you know why or/and how to fix it? PS: what is this yellow component to fix the gopro? Just so cool! Thank you, continue your amazing job :) Regards from France
Hey mic, Sick video. Wish I could have a dji phantom but it's too expensive for me. Just a question, what dslr do u use. Thx mic. Look forward to ur reply
9 років тому
Hi! If I don't use FPV do I really need to connect the USB Hero4 to gimbal?
WHOA! Man i was just thinking of doing this yellow thing on 3d printer because, although I would not do it yellow)) But as for all great inventions, it was already invented before me :) I'd love to buy it somewhere , could you please share the link or smth
Love your vids! Do you know if the Hero 3+ will fit in the H4-3D gimbal? I'm wanting to purchase a new gimbal and currently have the Hero 3+. I will purchase the H4-3D gimbal if it can accommodate the 3+, that way in the future if I upgrade to the Hero 4 I wont have to do any modding!
TheTonstar1 .... The gimble was built for the Hero 3/3+ ???? GoPro released a NEW camera.... Was DJI just suppose to turn back the hands of time and magically make the gimble fit the new HERO4 ???? No , but people with some common sense and a little skill can mod the gimble and MAKE IT WORK. They don't cry, or blame these companies providing you with this AWESOME technology.... THEY JUST FLY !!! No one is forcing you to purchase a HERO4 for the purpose of putting it on these gimbles. Buy a used 3/3+ and stop blaming DJI and GoPro.
Hi Mic, thank you so much for this video. I've been waiting for you to make this video for a week now! Lol. I've seen it done on other videos but I was just waiting for you to give it the green light jeje. You rule dude.
For anyone out there who's affraid of damaging the gimbal with this mod, don't be. This gimbal is a lot tougher than it looks. I've dropped my phantom twice from 80 feet onto concrete, the first time the bottom of the gimbal body took the hit so hard that it pushed the ball bearing into the one of the motors. I managed to bring it out again using a screw driver and a fair amount of force. The second time the main arm bent sideways, again using a fair amount of force I managed to bend it back into place. I've done dozens of flights after both accidents and the gimbal works perfect! So a little bit of force with the dremel is not gonna do any damage. Just make sure you cover the motors properly to avoid fine metal dust from reaching the motors. Happy flying everyone.
What is that clip you are using instead of the standard one with screws, looks so much handier than taking screws out every time I need my GoPro out!
You could also just use a rubber band.
You can guy them here:
www.shapeways.com/model/1644897/gopro-zenmuse-bracket.html
That is sold by a company called shapeways (dot) com and cost $12. I use a rubber band. Works great.
Please tell me if that yellow clip allows room to put a uv filter on the camera.
If so, I will order both today.
Hi Mic.
I want to know more about the (yellow) latch you're using in this video. I hate the standard latch (with screws).
Were can I find it?
Thanks.
WHAT wire are you plugging into the side of the camera, a Fat Shark wire or?
Thanks for filling me in. Now I know what to to expect when I put the new one in. Instead of, what the hay???
Where did you get that cool yellow camera bracket?
www.shapeways.com/model/1644897/gopro-zenmuse-bracket.html
It snaps!
Shapeways
It is cool. But a $.03 rubber band does the same thing.
Ivano Romani but how is it called?
Never realized the H3-3d gimbal had the snap in option for the camera, damn that thing looks like a lifesaver!
You deserve more subs budd. Keep up the great videos.
Hi Mic, thank you so much for the video. Could you please tell me where can I get that excellent yellow clip on bracket to hold the gopro ti the gimbal please? Thank you.
Thank you so much, placing an order now.
I need that yellow bar! I keep a gopro on mine, only messed with it twice.. Third time I went to remove camera, the retainer bar broke & the data cable snapped off? Really disappointed in quality in that..
I'm going to try your yellow bar idea.. I generally don't remove it.. But still looks better made than stock retainer .. Thanks again! Love your videos!
I installed my go pro hero 4 on my h3-3d gimbal v2 USB port and seems to fit perfect didn't really notice it pressing the tool button but did notice a significant weight difference on the go pro side so would love to see if you think you need some added weight or if it's not nesseary Mitch make it another gopro tip because I know a lot of ppl looking for this answer
Great idea, would a file do if you did not have Dremel ?
Great mod. Please could you measure the diameter of the lens of your range if go pro. I am interested in the diameter of the plastic or rubber surround that encompasses the lens so the largest diameter not the glass lens itself
what is the bracket you used for securing the gopro to the gimbal i have to screw mine on and off
Great video!!! Please I wanna know more about Dji Phantom or other type or drone.
What is that mounting bracket called? the one that he used to hold his GoPro to the gimbal, I'm tired of unscrewing those screws.
Can you use an hero 3 black upside down? Or will this burn out the motors?
The lens will then be more in the middle and lower down, so less of the legs and props will be shown in the video..
(I know i can choose horisontal and vertical radius in the program, but thats not the point)
Great video by the way:)
Thanks for the video! Looking forward to seeing more !
I need one of those yellow clips! Very cool. Where can I find one?
What is the difference between sandisk u1 and u3, please help me, I'm going to buy the new gopro hero 4 silver edition and I don't know which one to buy. Thanks.
Hi Mitch love your work!
I notice in your latest videos your not using the Shapeways Zenmuse bracket.
Any reason for this? Just ordered mine and now worried there might be an issue.
Hello MicBergsma, can you tell me where do you buy the yellow clamp or where do I buy it?
Hi, please tell me where I can buy the yellow fast mounting bracket for gopro?
Is it REQUIRED to cut out that spot? I have the Hero 4 in a 2D and it doesn't actually press the button in all the way.
Hi Mic, may I know where do you get the yellow Go Pro holding clip
hi where is possible to buy your YELLOW plug foor ZEMUS 3D please is great
www.shapeways.com/model/1644897/gopro-zenmuse-bracket.html
Check out my store - micbergsma.tv for awesome GoPro mounts and accessories
Awesome videos Mic! I have a question for you, hope you can answer. When I use my gopro while hunting, which settings do you prefere? I use 1080p, 30 fps, and wide fov, and the problem is that everything far away (20 meters+) is hard to see. Any tips?
Hi. Why do you connect the mini usb cable?
Hello Mic,
Thank you for your videos I have a question!
I have seen your gopro seems to be turning on the left part when you don't made anything. I have the same issue with the Zenmuse h3-3d. Do you know why or/and how to fix it?
PS: what is this yellow component to fix the gopro? Just so cool!
Thank you, continue your amazing job :)
Regards from France
Mitch, what's the difference between h3-3d and h3-2d?
H3 2D = 2 axis h3 3D= 3 axis
Jr Freekicker 1 D
I've been using rubber bands to hold mine on for a couple of years. That screw is annoying and tiny.
Hey mic,
Sick video. Wish I could have a dji phantom but it's too expensive for me. Just a question, what dslr do u use. Thx mic. Look forward to ur reply
Hi!
If I don't use FPV do I really need to connect the USB Hero4 to gimbal?
WHOA! Man i was just thinking of doing this yellow thing on 3d printer because, although I would not do it yellow)) But as for all great inventions, it was already invented before me :) I'd love to buy it somewhere , could you please share the link or smth
Is "The Frame" still compatible with the hero 4?
going to get yellow clip awesome gadget thanks for tip to fit the g/pro4
MicBergsma hey I have question about gopro. Should I get macbook air or pro for gopro editing? If so, Which is good one? Air or pro?
Hi Mic!! where can I buy the yellow piece for go pro ??
I need this yellow mounting thing! Whats the Name of it?
Gopro Zenmuse Bracket
Love your vids! Do you know if the Hero 3+ will fit in the H4-3D gimbal? I'm wanting to purchase a new gimbal and currently have the Hero 3+. I will purchase the H4-3D gimbal if it can accommodate the 3+, that way in the future if I upgrade to the Hero 4 I wont have to do any modding!
Hey aren't they using phantom's in their gopro 4 promo video. They should have known this was an issue.
I'm getting my first go pro tommorow!!
Did the gimbal ever complain about the weight shift? Hero 3 and 4 have different CG.
I thought this would be about the weight difference to put less strain on the gimbal
Where can we get the yellow clip?
bigky226 www.shapeways.com/model/1644897/gopro-zenmuse-bracket.html
I think I'll stick with the Hero3+ for the H3-3D gimbal until they release the next version of gimbal specifically for Hero4.
hmmm... mine doesn't do this...
What will happen if the Settings button is pressed while flying?
Wifi will turn on
Great Job
Well... mine works fine without a mod. No pressure on the button.
Mic bergamot plz make it through the Ebola spreading around!
Cool trick
sehr guter Tip
Thanks!
Take a black sharpie and draw over the fix... it won't show up as much.
muchas gracias ...
thanks
I think ur cable tie is to tight.
not at all, it's loose, will post a video of them
MicBergsma Can't wait man... And can u make video how to eliminate jello effect on H3-3d without ND filter?. Much love
now we are talking!
Nice
it works normally without Mod
Hey, your videos are great, but put some music in the video, than it sounds better ;)
Mfg Ole
gopro-zenmuse-bracket
Why in the world would you put that blaring drill noise into this video? Owww my ears
+Daily Drone FPV Dude's deaf, give him a break. Besides, I think the sound of a drill is lovely. Unless I'm hungover.
Pilvenreuna Productions Oh I didn't know he was deaf. All is forgiven I suppose.
This is terrible! I want to buy the H3-3D and a Hero 4 but there is no way I would do this!
Nice of dji a go pro to work together!!!
TheTonstar1 .... The gimble was built for the Hero 3/3+ ???? GoPro released a NEW camera.... Was DJI just suppose to turn back the hands of time and magically make the gimble fit the new HERO4 ???? No , but people with some common sense and a little skill can mod the gimble and MAKE IT WORK. They don't cry, or blame these companies providing you with this AWESOME technology.... THEY JUST FLY !!!
No one is forcing you to purchase a HERO4 for the purpose of putting it on these gimbles. Buy a used 3/3+ and stop blaming DJI and GoPro.
Tyler Hatton bloody hell mate calm down all I was saying is it would be nice if these companies did work together!! Take a chill pill 💊
Bergsma* God damn auto correct