Really nice install. I like the fact that you try and run new line sets for these new installs as much as it is possible since you can’t run them all the time for example in malls. Really clean work. And the KE2 is my favorite. They work 10x better than the mechanical one they usually come with.
Im going live this evening 3/4/19 @5:PM (west coast time) to discuss my most recent uploads come on over and check it out if you can ua-cam.com/video/u62cdOX0OvM/v-deo.html
Im going live this evening 3/4/19 @5:PM (west coast time) to discuss my most recent uploads come on over and check it out if you can ua-cam.com/video/u62cdOX0OvM/v-deo.html
thanks bud ! Im going live this evening 3/4/19 @5:PM (west coast time) to discuss my most recent uploads come on over and check it out if you can ua-cam.com/video/u62cdOX0OvM/v-deo.html
You can actually set the time for your defrosts, I just pulled up the manual to confirm: you have to set the defrost per day (dpd) to Custom (CUS). From there you will see the time of day (TOD) parameter and d1 through d12 for your defrost times. (those are from the controller, I don't remember how to set that on the LDA interface) That's all we've been installing on or WIC and WIF for a while now, so far they've been money savers and have been pretty reliable, I think we've had one failure out of +-20 or so temp and lowtemp controllers over about a year.
Im going live this evening 3/4/19 @5:PM (west coast time) to discuss my most recent uploads come on over and check it out if you can ua-cam.com/video/u62cdOX0OvM/v-deo.html
Thanks bud!! Im going live this evening 3/4/19 @5:PM (west coast time) to discuss my most recent uploads come on over and check it out if you can ua-cam.com/video/u62cdOX0OvM/v-deo.html
I actually used cush clamps which have the insulation built into them www.haydoncorp.com/products/h-strut-system/general-fittings/pipe-conduit-supports/cush-a-therm
Im going live this evening 3/4/19 @5:PM (west coast time) to discuss my most recent uploads come on over and check it out if you can ua-cam.com/video/u62cdOX0OvM/v-deo.html
Im going live this evening 3/4/19 @5:PM (west coast time) to discuss my most recent uploads come on over and check it out if you can ua-cam.com/video/u62cdOX0OvM/v-deo.html
Have you had any issues with temp controls mounted on the coils? I never mount on the coil anymore. Too many issues with vibration. The past year or more I am actually mounting the KE2 external of the W.I. at the entrance. Super nice to adjust when not in a -10 box. Less likelihood for condensation issues on the controller itself. And, customer sees constant temp and hears alarms more often. You do have to order the longer com cable but it’s cheap! Very neat and clean install!
Im going live this evening 3/4/19 @5:PM (west coast time) to discuss my most recent uploads come on over and check it out if you can ua-cam.com/video/u62cdOX0OvM/v-deo.html
on 20611ke2 temperature controls you can actually set a specific time for defrost. where you choose to set defrost.take it up to custom,custom is after 12.then you can choose the specific times and duration. hope it helps
Im going live this evening 3/4/19 @5:PM (west coast time) to discuss my most recent uploads come on over and check it out if you can ua-cam.com/video/u62cdOX0OvM/v-deo.html
Also I know it could always be the guages but I pressurize to 150 psi too except I never have a variation of .5 or 1 psi over 30-60 minutes (sometimes 24 hrs) unless there is a leak. Any more and I'm leak checking. Also I've never been able to hold below 500 with a 2.5 psi drop on my gauges. I use the CPS mdw100 guages. But really the install is perfect worst case scenario a pin hole leak that brings you back in a yearish.
@@HVACRVIDEOS I have not seen this yet. Its something you can install and looks like the KE2 or is it like the beacon where the controller is mounted inside of the evaporator and has the remote thermostat? I guess I could just look it up.
Isn't there a custom on that particular controller? I'm going off of memory, so I could be wrong... I think there is a option for "CUS" for custom on your defrost time.
Im going live this evening 3/4/19 @5:PM (west coast time) to discuss my most recent uploads come on over and check it out if you can ua-cam.com/video/u62cdOX0OvM/v-deo.html
Nice work Chris. I can see why that KE2 is more easy to dial in via phone without manually adjustment. its more benefit for us. What's con and pro of having KE2 ? it will more repair especially with sensor, sir ? And for new FP manifold , I like what I see with probe that clamped at evaporator coil at walk in cooler while you're up at roof. what's limit of range of probe ? Thank you for sharing as always 👍
The ke2 products are nice but time will tell what problems I run into with them. So far so good As far as the fieldpiece manifold it's only using bluetooth so there can be interference. I have ran into some frustrating interference problems with it before but overall its great
Im going live this evening 3/4/19 @5:PM (west coast time) to discuss my most recent uploads come on over and check it out if you can ua-cam.com/video/u62cdOX0OvM/v-deo.html
It would be really nice to have a time-lapse camera setup for these kinds of jobs so we can see you actually do the install without having to upload a multi-hour video
Im going live this evening 3/4/19 @5:PM (west coast time) to discuss my most recent uploads come on over and check it out if you can ua-cam.com/video/u62cdOX0OvM/v-deo.html
They are called cush clamps they are insulated strut clamps and work great www.haydoncorp.com/products/h-strut-system/general-fittings/pipe-conduit-supports/cush-a-therm
Im going live this evening 3/4/19 @5:PM (west coast time) to discuss my most recent uploads come on over and check it out if you can ua-cam.com/video/u62cdOX0OvM/v-deo.html
Im going live this evening 3/4/19 @5:PM (west coast time) to discuss my most recent uploads come on over and check it out if you can ua-cam.com/video/u62cdOX0OvM/v-deo.html
What the Hell, why is there a thumbs down? Is there a Troll following you? I heard you say there was stuff you disliked and stuff you did like on the install, is there Moran’s criticizing your videos
As Zack from shop talk puts it they are called the Tiny Weiner brigade and there are about 3-5 of them that always give me a thumbs down on just about every video.
Im going live this evening 3/4/19 @5:PM (west coast time) to discuss my most recent uploads come on over and check it out if you can ua-cam.com/video/u62cdOX0OvM/v-deo.html
Im going live this evening 3/4/19 @5:PM (west coast time) to discuss my most recent uploads come on over and check it out if you can ua-cam.com/video/u62cdOX0OvM/v-deo.html
Really nice install. I like the fact that you try and run new line sets for these new installs as much as it is possible since you can’t run them all the time for example in malls. Really clean work. And the KE2 is my favorite. They work 10x better than the mechanical one they usually come with.
Great job, I love the KE2 brand. Been using it a few years with huge success.
Nice install Bud ... Love the new technology ... Wish they could of had it back in the day ... Much appreciated ...
Very clean and professional work Chris. Beautiful job
Im going live this evening 3/4/19 @5:PM (west coast time) to discuss my most recent uploads come on over and check it out if you can ua-cam.com/video/u62cdOX0OvM/v-deo.html
Your like a genius. I wish you would do a podcast.
Thanks so much bud, I'm not a genius but I am getting ready to start a podcast soon......
Im going live this evening 3/4/19 @5:PM (west coast time) to discuss my most recent uploads come on over and check it out if you can ua-cam.com/video/u62cdOX0OvM/v-deo.html
Nice little install! I like that temp/defrost controller. Thanks for sharing that Chris.
Thanks bud
Great video Chris. We've been exposed to a few more KE2 systems and they are great.
thanks bud ! Im going live this evening 3/4/19 @5:PM (west coast time) to discuss my most recent uploads come on over and check it out if you can ua-cam.com/video/u62cdOX0OvM/v-deo.html
Awesome!!! Your work is great wish I was able to learn more from you.
You can actually set the time for your defrosts, I just pulled up the manual to confirm: you have to set the defrost per day (dpd) to Custom (CUS). From there you will see the time of day (TOD) parameter and d1 through d12 for your defrost times. (those are from the controller, I don't remember how to set that on the LDA interface)
That's all we've been installing on or WIC and WIF for a while now, so far they've been money savers and have been pretty reliable, I think we've had one failure out of +-20 or so temp and lowtemp controllers over about a year.
Good stuff thanks for the tip!
Cracking install.. great job..thanks for the vid
Im going live this evening 3/4/19 @5:PM (west coast time) to discuss my most recent uploads come on over and check it out if you can ua-cam.com/video/u62cdOX0OvM/v-deo.html
Great job again like always
Thanks bud!! Im going live this evening 3/4/19 @5:PM (west coast time) to discuss my most recent uploads come on over and check it out if you can ua-cam.com/video/u62cdOX0OvM/v-deo.html
Nice job. Check out klo-shure clamps for the suction line. Grabs the pipe great and you spray foam the insulation into the clamp.
I actually used cush clamps which have the insulation built into them
www.haydoncorp.com/products/h-strut-system/general-fittings/pipe-conduit-supports/cush-a-therm
Very nice. Glad to see a pee trap in one of your installs!
Awesome work
Thanks Paul
Im going live this evening 3/4/19 @5:PM (west coast time) to discuss my most recent uploads come on over and check it out if you can ua-cam.com/video/u62cdOX0OvM/v-deo.html
Great job 👍👍👍
Im going live this evening 3/4/19 @5:PM (west coast time) to discuss my most recent uploads come on over and check it out if you can ua-cam.com/video/u62cdOX0OvM/v-deo.html
Have you had any issues with temp controls mounted on the coils? I never mount on the coil anymore. Too many issues with vibration. The past year or more I am actually mounting the KE2 external of the W.I. at the entrance. Super nice to adjust when not in a -10 box. Less likelihood for condensation issues on the controller itself. And, customer sees constant temp and hears alarms more often. You do have to order the longer com cable but it’s cheap! Very neat and clean install!
Im going live this evening 3/4/19 @5:PM (west coast time) to discuss my most recent uploads come on over and check it out if you can ua-cam.com/video/u62cdOX0OvM/v-deo.html
That's all I install on any cooler that needs a replacement thermostat or new install that does not have a defrost clock
I'm really starting to like their products
on 20611ke2 temperature controls you can actually set a specific time for defrost. where you choose to set defrost.take it up to custom,custom is after 12.then you can choose the specific times and duration.
hope it helps
Thanks so much I will look into that!
Nice install Chris. Appreciate you sharing the install. Chris are they replacing 404a with hydrocarbon?
I'm sure eventually we will replace 404 but I'm not ready to do so yet. The most popular replacement at this time is r-448
Manitowoc is going to 410a over 404 due to gwp. Only a matter of time before hydrocarbons become required
Im going live this evening 3/4/19 @5:PM (west coast time) to discuss my most recent uploads come on over and check it out if you can ua-cam.com/video/u62cdOX0OvM/v-deo.html
Chris, are those new fieñd piece Sman's?
Trenton is selling the evaporators with the ke2 already installed. Think it's like 3-400 bucks more. Haven't tried it yet but want to.
Yeah I've been thinking about one of those
Also I know it could always be the guages but I pressurize to 150 psi too except I never have a variation of .5 or 1 psi over 30-60 minutes (sometimes 24 hrs) unless there is a leak. Any more and I'm leak checking. Also I've never been able to hold below 500 with a 2.5 psi drop on my gauges. I use the CPS mdw100 guages. But really the install is perfect worst case scenario a pin hole leak that brings you back in a yearish.
Kolpak is also just renamed (artic fox)
Yeah heatcraft just came out with a knock off controller that has all the same features built into it. It's called their intelligen
@@HVACRVIDEOS I have not seen this yet. Its something you can install and looks like the KE2 or is it like the beacon where the controller is mounted inside of the evaporator and has the remote thermostat? I guess I could just look it up.
Isn't there a custom on that particular controller? I'm going off of memory, so I could be wrong... I think there is a option for "CUS" for custom on your defrost time.
Oops... looks like someone has already addressed accessing the custom settings. :)
Yeah I'm gonna look into that thanks for pointing it out.
Im going live this evening 3/4/19 @5:PM (west coast time) to discuss my most recent uploads come on over and check it out if you can ua-cam.com/video/u62cdOX0OvM/v-deo.html
Nice work Chris. I can see why that KE2 is more easy to dial in via phone without manually adjustment. its more benefit for us. What's con and pro of having KE2 ? it will more repair especially with sensor, sir ?
And for new FP manifold , I like what I see with probe that clamped at evaporator coil at walk in cooler while you're up at roof. what's limit of range of probe ?
Thank you for sharing as always 👍
The ke2 products are nice but time will tell what problems I run into with them. So far so good
As far as the fieldpiece manifold it's only using bluetooth so there can be interference. I have ran into some frustrating interference problems with it before but overall its great
@@HVACRVIDEOS got it, sir. Again thanks and appreciate it for your time.
For witch reason is this P-Trap on the low-side of the Evap-Coil?
It helps the oil get back to the compressor
Great video!
btw LG Compressor ? it runs quiet.
Another great job done.
Thank you for sharing.
Are you using the fieldpiece sman?
Im going live this evening 3/4/19 @5:PM (west coast time) to discuss my most recent uploads come on over and check it out if you can ua-cam.com/video/u62cdOX0OvM/v-deo.html
It would be really nice to have a time-lapse camera setup for these kinds of jobs so we can see you actually do the install without having to upload a multi-hour video
Im going live this evening 3/4/19 @5:PM (west coast time) to discuss my most recent uploads come on over and check it out if you can ua-cam.com/video/u62cdOX0OvM/v-deo.html
What type of clamps did you use on the suction line? looked like it gripped around the insulation, "Klo-Sure"?
They are called cush clamps they are insulated strut clamps and work great
www.haydoncorp.com/products/h-strut-system/general-fittings/pipe-conduit-supports/cush-a-therm
Im going live this evening 3/4/19 @5:PM (west coast time) to discuss my most recent uploads come on over and check it out if you can ua-cam.com/video/u62cdOX0OvM/v-deo.html
Wow. Heatcraft use lg compressor like haier do
What fieldpiece sman is that?
The new sman 480 it will be released soon
That’s an awesome tool drawer stack. Where did you get from and what brand is it. Thanks
The drawer is from American van
Www.americanvan.com
Cool install Chris. I catched the Welbilt Digital Literature app in your phone. Has it a good selection of service manuals?
I just downloaded it recently and havent had a chance to use it yet
Im going live this evening 3/4/19 @5:PM (west coast time) to discuss my most recent uploads come on over and check it out if you can ua-cam.com/video/u62cdOX0OvM/v-deo.html
Love the videos
Thanks
@@HVACRVIDEOS no thank you
What the Hell, why is there a thumbs down? Is there a Troll following you? I heard you say there was stuff you disliked and stuff you did like on the install, is there Moran’s criticizing your videos
As Zack from shop talk puts it they are called the Tiny Weiner brigade and there are about 3-5 of them that always give me a thumbs down on just about every video.
Im going live this evening 3/4/19 @5:PM (west coast time) to discuss my most recent uploads come on over and check it out if you can ua-cam.com/video/u62cdOX0OvM/v-deo.html
#67 Thumbs up!
Im going live this evening 3/4/19 @5:PM (west coast time) to discuss my most recent uploads come on over and check it out if you can ua-cam.com/video/u62cdOX0OvM/v-deo.html
That solenoid is poop
I agree
Get a frickin iPhone!
Hell no! :-) I'm an android kinda guy
Great work!