Hallberg-Rassy 312 "Ellös": INSTALLING THE VOLVO PENTA D1-30 PT.2 DIY
Вставка
- Опубліковано 28 сер 2024
- Hallberg Rassy 312 "Ellös" - Sea4See: "The Refit of Hallberg Rassy 312 Ellös"
Hello guys.. for you the new video with the conclusion of the VOLVO PENTA D1-30 engine installation, Vetus Waterlock and Guidi waterstrainer..It was hard work to get a nice and tidy installation but at the end we won!! For you there is also the installation of the new Ultra Safety Systems Bilge Pump Switch Junior one of the best on the market IMO.
If you like my video, leave THUMB UP and happy to get your comments I will reply to you!
A hug Gabriele
➡️Many thanks to Toptech Solution and Franco for his immense support and sponsor me:
www.toptech.it/
➡️Many thank to Stefano Moretti & Luca Caironi of Lineastem for support and sponsor me, if you need a new teak deck do not hesitate to get in contact ,they have excellent prices and professionalism at the top, here the website link and contact infos:
stemnautica.it/...
➡️Many thanks to Ennio Prase owner of Prase Media Technologies distributes products for the audio, video and digital signage sectors in Italy include Shure Mics and many other top products, check it out..
www.prase.it/
➡️Thanks for support me and my project also to:
Joakim of Batsystem for light and electric stuff:
www.batsystem.s...
➡️Many Thanks to Stefano Finco owner of Armare Ropes and Tiziano, among the leading companies in the sector of nautical ropes, offering a comprehensive range of technologically advanced products.check it out!!
www.armare.it/en/
➡️For epoxy resin and all stuff related Mr. Marco Cecchi, a master of knowledge and best products around!!
www.cecchi.it/
➡️For all related to sanding... the best products around check it out:
www.siaabrasiv....
➡️For spare parts for my Hallberg Rassy... thank to Ludwig at Hallberg rassy Parts!
www.hr-parts.com/
➡️And off course many thank to Marco Potente, to give the permission to use his music in my videos. He is probably one of the most talented musician and producer 🎸 !!.
I will forward the website where you can download the tracks for your videos or project. Stay tuned!
audiojungle.ne....
------------------------------------------------------------------------------------------------------------
➡️ About ®Sea4See - Official: Sea4See ⛵ was created with an aim to share my sailing life experiences and knowledge, especially restructuring sailboats. In my youth I worked in a factory where they built kayaks made by fiberglass so.. learn a lot regarding. In my off days from work, I have worked for a long time in a shipyard, further benefiting my knowledge and enhancing my sailing, boat maintenance skills. Today through my sailing vlogs on UA-cam, I want to share my sailing stories, sailing lifestyle videos, sailing adventure with all of you. I love working on boats because i belive that all boats have a soul...
More info...www.sea4see.org....
➡️ About Gabriele: Hello friends my name is Gabriele and I am an offshore Yachtmaster. A yachtsman who is passionate about everything related to the sea and sailing lifestyle. After having sailed in the various seas of the world, I bought my first boat and then refit her and later I left for a sabbatical year sailing through the islands of the Mediterranean. I am passionate about DIY in sailing boats and now after selling Dreamer which was my first boat, I am restoring "Ellös" a Hallberg - Rassy 312 that will take me back to the seas of the world..
Read more about me www.sea4see.org...
➡️ About My Boats: The Hallberg - Rassy 312 was built for fifteen years between 1979 and 1993. Totally 690 boats were built during this time period. The HR 312 was a very popular model. Until 1986 the Hallberg - Rassy 312 Mark I was built, with the portlights in the blue stripe in the hull and with or without quarter berth. Models without quarter berth had an extra cockpit locker on starboard.
Read More..www.sea4see.org....
___
⛵ Important Links ⛵
___
☑ Subscribe ®Sea4See - Official on UA-cam: bit.ly/Sea4See-...
☑ Follow ®Sea4See - Official on Facebook: bit.ly/Sea4See-...
☑ Visit ®Sea4See - Official Website: www.sea4see.org/
☑ Follow ®Sea4See - Official on Twitter / sea4see1
☑ Follow ®Sea4See - Official on Instagram / sea4see
☑ Join ®Sea4See - Official Affiliate program www.tubebuddy....
#Sea4See
#Sailing
#SailingVlogs
#SailingLifestyle
#SailingAdvantures
#SailingChannel
#SailingVideos
#SailingLifeVideos
#SailingVideoUA-cam
Category
People & Blogs
Music by Bensound
"I have a license or written permission from the proper rights holder to use this material"
➡️Visit www.Bensound.com
Gabriielle I love your work ... after 20+ years of owning yachts, there is only one way to install anything - and that's to aim for perfection ! Take your time and use the best possible components is the best advice I have ever been given. A job done well is so much more enjoyable ... and it keeps paying into the future.
Thx mate for the kind words!
As usual Gabrielle you set the standards mere mortals could never achieve. The engine room is looking both functional and and pleasing. Quality job.😀⛵️👍
Thx Norman still some thing to get a look...
Nothing more beautiful then a nice tidy engine room and clean bilge!
This is true nice and clean is the best!! Thx David!
As usual you have done a perfect job. I like the fuel cleansing solution as well as the good maintenance access! Thanks for sharing
Thx Mike but I need to improve Other stuff
Beautiful job as usual, now if I look at my engine room I will cry!
Ben for first start to clean 😀😀😀
Great job Gabriele. I can see Ellös splashing as soon as Covid allows. Can't wait!
From water the covid is the only thing could stop me!!!
Bravo, Gabriele!!
Grazzieeee
ciao, sei un grande bravo, ti seguo ho visto tutti tuoi video.
Grazie mille Davide!!!!!💪🏻
Engine installation looks good!
Now when you have everything connected, remember to check that you have no electrical connection or conductivity between the gearbox and the engine.
Pay a lot of attention ! Was already assembled by Volvo sono problem I check the electricconnection and was perfect!!!
Very good to check because another guy with a Volvo had a missing isolation washer. The dealers don’t know about this and they don’t check.
I got same concern Ben regarding the bronze water filter... need to check carefully if is better to use the plastic one....
Hallberg Rassy can learn a lot of you😜. What a great perfection!
Thx Edwin too much☺️
Engine room looks good. Very neat. 👍
Thx mate!
Another great bit of progress ......really nice clean install too 💪👏
Yes ! Need to sail as soon I can!!
@@sea4see .....won't be too long now by the looks of it 😁 ....will you do your first season cruising around Italy ? ....that would be pretty cool to see !
This summer test ‘ check everything and sail we will see!!
Thank you for such a good presentation.
Thx a lot for your comment🙏🏻
Gabriele, You made me wanna go to Sweden right now and have a tour on your boat !
Steven you need to come in Italy!!!😉
@@sea4see Forgive me:)))))
Hello Gabriele ! I am always amazed by your taste for quality workmanship. I learn a lot by looking at your videos. It give me good ideas for the maintenance of my own boat.
I am a little concerned about the hose passing true the fuel lines (6:50 on the video). A diesel engine vibrate a lot and I think that the hose might suffer from abration if it is not well protected from rubbing against those fuel lines. Of course, it will not append overnight but, better safe than sorry.
Hey mate same my concern I will move outside that hose I don’t like too! Thx for advise!!!’
hello gabriele,
you're doing a great job.
I hope you keep making good progress.
keep it up I like to watch.
by the way: i have the same boat as you, built in 1985.
werner from southern germany
Hey mate great you sail in lake?
Quest for perfection ! like it.
Thx mate not perfection still more thing to do.....
Nice attention to even the very small details :-)
Thx mate!! Detail are important!!!
Great work as allways
Thx pal!!!
Another wonderful step toward completion of Ellos. But then is boat work ever really finished? haha
My label for this vlog would definitely be "sea4see--the motorized happiness" and my reaction would be "motor envy"....
Ah ah ah 👍🏻 thx mate!
Mitico......👍
Grazzieeeeee Tommaso!!’
great videos Danke
Thx Alexander
Bella installazione del nuovo Volvo, lo vorrei mettere su anche io ma costa uno stonfo, qualche suggerimento?
Ciao io ho risparmiato facendo il lavoro... se passi da un rivenditore ti caricano il 30 % in più se basta....
Hi! Great video as always! Just would like to ask you where did you install the vacuum valve? I couldn’t see it usually stays after the raw water pump or after the heat exchanger.
What you meaning vacuum valve?
I mean anti syphon valve that prevents overflow the engine with raw water.
www.vetus.com/se/antisifone-con-valvola-4839.html
No I did t install it. Ready I’m my hand but I need to make the first trial in open sea with Volvo mechanic… check everything and if need I install straight away I’m at the limit border to install or not install it as the instruction followed
@@sea4see Well if that me I wouldn't think for a second because this is serious. Ok let's say that the mechanic says that the syphon valve is needed after the sea trial. Well after can be to late if you get sea water inside your engine... I am asking you because tomorrow I'm going to install the same D1-30 on friend boat and I know how careful you are taking decisions about work and design. I hoped that have already been true the dilemma where to place the syphon valve. Please don't hesitate install it. I personally like the vetus model with the drain tube because the drain can be installed in the cockpit and if there is malfunction on this valve it will start leaking and you will see it to close the seacock.
@Asen Naydenov thx mate !!! Piece of cake installing it if not need I will take out…but I will follow your advise!!!!
Perfect. Quando sara pronta la barca.?
George’s verso maggio/giugno covid permettendo..😀
Se mi mandi i dati ti faccio subito un bonifico per la caparra per quando la venderai... :-)
Prima però fammela mettere in acqua😂