Can it replace the blower in effluent treatment plant- aeration based treatment? What would happen if sludge is there? Will there be deposition of sludge inside over the time?
The device could replace a blower, it would disperse the sludge, you can inject oxygen to help with the biological breakdown, it will not clog the G-CAV device. However, to give a more in depth and accurate assessment, we would need much more information to give an accurate appraisal. Please send info to; info@globalcavitation.com
Absolutely, it has been difficult to sanitise pools with ozone until now. We specialise in large volume complete gas infusion and I expect that there will be very high demand for this very thing. Please send us an email to info@globalcavitation.com and we will send you some information on it. There is much we can share.
Hi There, the G-CAV 3.5 would be ideal for this set up! Go to www.globalcavitation.com to see all the info' or drop us an email with an overview of how your system works, flow, turnover of water, current DO level etc... info@globalcavitation.com
At this point we would say it can, but we need a little more info around what your set up is, what environment is the yeast being used, for what? Please drop us an email with more overview/info to: info@globalcavitation.com
At which pressure was the HO gas infused into the liquid? ..and why at some point it became visible? ..does it mean bubbles are becoming bigger than 10nm?
Thank you for your comment! The gas is injected on the suction side of the pump if it makes sense, and the used HO generator’s maximum shut-off pressure is 7 PSI above atmospheric pressure. Since we are on the suction side, the gas injected is slightly below atmospheric pressure. As you have noted, after some time, microbubbles are formed (nanobubbles are still being formed). To understand this, note that the volume of gas injected is constant and that at the starting point of the experiment, there is a maximum amount of gas that can be held in the volume of water used. After each cycle, less space is available for the gas to dissolve, and through cavitation, nanobubbles may collide with another nanobubble, forming larger bubbles. This is why some microbubbles are formed after some time of recirculation.
@@GlobalCavitationwow. Great explanation. I really need to speak with someone there. I have a use for this technology, the way your unit works. I was very excited to come across this video just now.
Japan has a very simple device that takes no use of technology. Anzai Kantetsu used only a small specialized ceramic nozzle (resembling a carbon airstone) to generate bubbles the most efficient way possible. I think when it comes to machines like yours, it's only of industrial applications but yet that's where it only persists in the world of dynamic fluctuations. I do hope your tech will be more efficient to everyday economy and not only to the business companies where we can't afford.
BUEMOS DIAS . un cordial saludos hs todas personas que vicitamos esta pajina Creo con todo respeto que usted se merese , su critica es destructible y mal intencionada Antes se le debe de reconoser no solo su desarrollo para tantos fines .sino agradeserle por conparti con todos nosotros .cada cual le data el uso y desenpeño para el que lo require . De antemano le estoy muy agradecido desde COLOMBIA mi admiracion y que DIOS bendiga tal conocimiento .feliz dia NICOLAS MADRID
Thank you for watching!
🔗 For full specs and benefits of G-CAV, visit our website.
www.globalcavitation.com
Good One mate!
We're getting one of these to replace our old one. Using it for nanomedical technology.
What is Pump capacity from HP?
what could be the cost
Would definitely love to see a home hydroponics scale device.
Can it replace the blower in effluent treatment plant- aeration based treatment? What would happen if sludge is there? Will there be deposition of sludge inside over the time?
The device could replace a blower, it would disperse the sludge, you can inject oxygen to help with the biological breakdown, it will not clog the G-CAV device.
However, to give a more in depth and accurate assessment, we would need much more information to give an accurate appraisal. Please send info to; info@globalcavitation.com
Can this be used to promote septic waste purification on midsize vessel's..?
What about the nanoparticals mechanically removed from the device? How LONG does it last before cavatition destroys it? What's the mtf?
Cavitation through the device is what generates the nanobubbles, ranging from 7nm, 10nm to max size of 80nm
How would you go about infusing ozone nanobubbles into pool water with your system? What would that run for a ~10,000 gallon pool?
Absolutely, it has been difficult to sanitise pools with ozone until now. We specialise in large volume complete gas infusion and I expect that there will be very high demand for this very thing. Please send us an email to info@globalcavitation.com and we will send you some information on it. There is much we can share.
Can we use it for biodiesel production of En standard values.
Hi there. Please contact at simon@globalcavitation.com with your contact detail.
I need this in my life. Do you offer anything for a home 400 gallon aquaponics system? Thank you for making such a great video.
Hi There, the G-CAV 3.5 would be ideal for this set up! Go to www.globalcavitation.com to see all the info' or drop us an email with an overview of how your system works, flow, turnover of water, current DO level etc... info@globalcavitation.com
Hello! Can this system be used to aerate a yeast culture? I'm afraid the cells will die
At this point we would say it can, but we need a little more info around what your set up is, what environment is the yeast being used, for what? Please drop us an email with more overview/info to: info@globalcavitation.com
At which pressure was the HO gas infused into the liquid? ..and why at some point it became visible? ..does it mean bubbles are becoming bigger than 10nm?
Thank you for your comment! The gas is injected on the suction side of the pump if it makes sense, and the used HO generator’s maximum shut-off pressure is 7 PSI above atmospheric pressure. Since we are on the suction side, the gas injected is slightly below atmospheric pressure. As you have noted, after some time, microbubbles are formed (nanobubbles are still being formed). To understand this, note that the volume of gas injected is constant and that at the starting point of the experiment, there is a maximum amount of gas that can be held in the volume of water used. After each cycle, less space is available for the gas to dissolve, and through cavitation, nanobubbles may collide with another nanobubble, forming larger bubbles. This is why some microbubbles are formed after some time of recirculation.
@@GlobalCavitationwow. Great explanation.
I really need to speak with someone there.
I have a use for this technology, the way your unit works.
I was very excited to come across this video just now.
@@willlock3644 for more information please send an intro email to info@globalcavitation.com We will respond directly!
Japan has a very simple device that takes no use of technology. Anzai Kantetsu used only a small specialized ceramic nozzle (resembling a carbon airstone) to generate bubbles the most efficient way possible. I think when it comes to machines like yours, it's only of industrial applications but yet that's where it only persists in the world of dynamic fluctuations. I do hope your tech will be more efficient to everyday economy and not only to the business companies where we can't afford.
BUEMOS DIAS .
un cordial saludos hs todas personas que vicitamos esta pajina Creo con todo respeto que usted se merese , su critica es destructible y mal intencionada
Antes se le debe de reconoser no solo su desarrollo para tantos fines .sino agradeserle por conparti con todos nosotros .cada cual le data el uso y desenpeño para el que lo require . De antemano le estoy muy agradecido desde COLOMBIA mi admiracion y que DIOS bendiga tal conocimiento .feliz dia NICOLAS MADRID
good product. costing please
Thank you for your comment.
What size?
Please refer to the table on our website for more information:
globalcavitation.com/index.php/g-cav-series/
How well can the "right" saturation point be spotted? ...Is there any instrument you recommend to spot that saturation level? Thank you
For Oxygen, use a DO meter.
@@simonwalshaw3153 Thanks. What should I use for Hydrogen instead? ..Would a DO meter be good?
@@PierdamianoVenti Similar thing, that does Hydrogen Measurement.
Can not visit your website, you have email to reach you?
For 500 liters per minute of water, ¿what's the air/oxygen flow for this system?
Thank you for your comment. It will be around 5.0L per minute - 7.5L per minute.
@@GlobalCavitation Thanks a lot.
YOU MUST LOOK UP MALCOLM BENDALL’s THUNDERSTORM GENERATOR
You've been hunting around like me. Do you see the implications of this tech?
@@thumperhunts6250 Massive implications and massive applications.