There’s a seal in your power steering that allows fluid to drain into your oil pan also when the seal fails all the oil will go to the oil pan so make sure you always use straight oil or Lucas oil in power steering res. Also if you get too much play in your wheel you can take slack out with jam nut on backside of power steering pump FYI
@@edvisser3629 pretty much just take my time and do it the best I can do I don’t have to redo it anytime soon, nothing more disappointing than self failure
These Cabmates were very popular back in the eighties before the OEM’s caught up the slack. Thanks for bringing us along. Take care and hang in there. Have a good Thanksgiving.
Thanks Chad, great tutorial on swapping over to rear cab suspension. Something I would like to do one day even though mine has cab mounted exhaust stack and air intake complicating a swap.
Thanks Chad. You’ve got one nice looking rig there my friend. BTW, when pouring power steering fluid, oil, or any fluid, pour down the front or back of the container not down the side. It may seem less natural but will give a nice smooth pour without the glug glug of trapped air trying to escape. Practice pouring a few drinks of your favourite beverage;-) Keep up the great work!
Yeah I’m sure glad someone added cab mate air ride to the Pete somewhere in its life makes a big difference when the spring suspension slams back down while Bob tail
I'm never counting you out or having thoughts that you can't get s**t done. Proud of you bro. You always make things work. like always keep on figuing things to get um done. Two Thumbs Up. great video and very enjoyable to listen at you talk while you get s**t to work. Stay safe & Blessed man.
I think it might have something to do with the shift linkage. This K-Whopper has the stick hard attached to the engine and not moving with the cab instead of having the extra linkages to allow the stick to stay in the cab when jacked up. That's my thinking at least.
you should of used a 3/8 male pipe to 1/4 female pipe bushing Chad would of looked better and you wouldn't of had all that sticking out. just food for thought
Great content Chad. The Old Blue Ox looks fantastic, congrats on getting the air ride finally on. As always, the video was informative and I learned some more about old iron. Sucks about the filter being the wrong one though, typical in todays world. I don't care if your vids are 20 seconds or 3 hours, I like the content and will watch all of them in their entirety, screw the haters. Well done, and it looked like you had plenty of that fucking cardbard! Until the next one...K.A.M.!
@@keepontruckinoutlawlife1248 I'm sure he doesn't need help. We all know he's good at what he does. Still having Pretty there would be nice. Nothing more, nothing less.
@@slicksiderepairllc2822 well it’s a simple set up you should have no problems figuring it out. Ask them for ups shipping so fed ex doesn’t damage or lose it like they did with mine.
Very nice truck 👍
Thanks 🙏🏻
There’s a seal in your power steering that allows fluid to drain into your oil pan also when the seal fails all the oil will go to the oil pan so make sure you always use straight oil or Lucas oil in power steering res. Also if you get too much play in your wheel you can take slack out with jam nut on backside of power steering pump FYI
It’s all good
You need a shop at your house for your trucks so you can work on them in the warm
I don’t make enough off UA-cam for that 🥴
That's a good kid worth, that's a good K 100. It's a good k one hundred the brand takes care of his rig
Still working it hott
Good video again I like the long video it was good
Thanks Glenn hope you’re doing well!
That tape is always a pain..any air use pipe.dope..but that stuff is like silicone..always all over u...nice job
Thanks Ed
Awesome job time and patience..I Hate when people say how long is going to take...it will take as long as it does to be done right
@@edvisser3629 pretty much just take my time and do it the best I can do I don’t have to redo it anytime soon, nothing more disappointing than self failure
Good job like the content and your attitude makes me laugh . I Keep saying to my wife "I DON'T KNOW " LOL. Keep them coming
Thanks Robert
Definitely
These Cabmates were very popular back in the eighties before the OEM’s caught up the slack. Thanks for bringing us along. Take care and hang in there. Have a good Thanksgiving.
Thanks Carl I appreciate it, You Too My Friend!
Man you need sharper drill bits 😅
🤙🏻
Awesome sunset with the truck👍👍👍
😎
Thanks Chad, great tutorial on swapping over to rear cab suspension. Something I would like to do one day even though mine has cab mounted exhaust stack and air intake complicating a swap.
Yep you’ll need to fabricate some stuff
What’s going on today ?
I cut some stuff out and my music is off. 🥴
Hellow Chad hope you an your family are great good to see you an the trucks good luck see you soon buddy
Thanks Tommy how you healing up?
Thanks Chad. You’ve got one nice looking rig there my friend.
BTW, when pouring power steering fluid, oil, or any fluid, pour down the front or back of the container not down the side. It may seem less natural but will give a nice smooth pour without the glug glug of trapped air trying to escape.
Practice pouring a few drinks of your favourite beverage;-)
Keep up the great work!
😂 my beverages are a little lighter than that jug!
Good job Chad everybody with a cab over need to try that it sure made a big difference
Yep sure does
Great video Chad glad to see you get the air ride put on the Blue truck. Looking forward to your next video stay safe Chad.
Thanks Richard
Hellow Chad make the blue k/w batter and batter
😎
Rather than dope tape just use some silicone
🤙🏻
We need new vids bud….. I’m wearing all these old vids out. We got all the words memorized like a kids Disney movie…. Let’s goooooo…! 😜
Every Saturday night at 7pm there’s a new episode..
@@1ChadKeegan
Can u make one on Sunday too.. ? Jk
That’s one great looking truck chad 👍⭐️⭐️⭐️⭐️⭐️
Thanks Don
Yeah I’m sure glad someone added cab mate air ride to the Pete somewhere in its life makes a big difference when the spring suspension slams back down while Bob tail
Yessir especially with the short wheelbase
Did you buy the cabmate through the KW dealer?
No
Good job Chad👍👍👍
🤙🏻
cuando vas a reparar la camioneta ford
It’s not mine and it’s in Georgia, I’m in Ohio
hey chad! 👋 always enjoys your videos. thank you for keeping it 💯
Definitely! Thanks Mr.J
Nice job Chad,,, always s pleasure watching your videos, keep em comming driver,
Thanks messed my music up because I cut out some in the beginning 🥴
Waiting for the right full moon to come along isn't procrastinarion. LOL
We’re big moon people around here get your crystals ready 🤓
I'm never counting you out or having thoughts that you can't get s**t done. Proud of you bro. You always make things work. like always keep on figuing things to get um done. Two Thumbs Up. great video and very enjoyable to listen at you talk while you get s**t to work. Stay safe & Blessed man.
Thanks buddy I’m glad you enjoyed it! Bonecrusher
did the cab mate affect the shifting. I have one with the cab mate and one with out and the one with the cab mate seems more jumpy when changing gears
it didn’t effect anything
I think it might have something to do with the shift linkage. This K-Whopper has the stick hard attached to the engine and not moving with the cab instead of having the extra linkages to allow the stick to stay in the cab when jacked up.
That's my thinking at least.
Hell yeah brother! Gonna help the lower back fa sho! I’m so glad the short bastard I own already had the cab air ride.
Definitely will be nice
you should of used a 3/8 male pipe to 1/4 female pipe bushing Chad would of looked better and you wouldn't of had all that sticking out. just food for thought
I went to the store and they didn’t have that so I used what I had
@@1ChadKeegan you have to do what you have to do lol it works thats what matter's
Very humorous Chad great stuff as usual
Doing it buddy
Doing all you can do man that's all you can do, trucking ain't easy!
You got that right!
Hello Chad what price do you have in mind?
Email me your offer @ chadkeegan@live.com
Someone's let that chad keegan loose again 🤣🤣🤣🤣....just kidding chad 🤣🤣🤣🚛🙋♀️
The Goose Is Loose!
Great job driv,ah definitely not a easy one either... truck looks mean.
Thanks Bro
@@1ChadKeegan yez zir
Just wondering Chad, does your job let you come home every night????????????????
Yes I’m a local guy who will only travel in the state of Ohio with my current job
Great content Chad. The Old Blue Ox looks fantastic, congrats on getting the air ride finally on. As always, the video was informative and I learned some more about old iron. Sucks about the filter being the wrong one though, typical in todays world. I don't care if your vids are 20 seconds or 3 hours, I like the content and will watch all of them in their entirety, screw the haters. Well done, and it looked like you had plenty of that fucking cardbard! Until the next one...K.A.M.!
Always on top of the fucking cardboard! Thanks buddy I appreciate it
I took a screen shot of a K100 with the batteries set between the frame rails behind the cab. I want to do that so I can put on an APU 💪
Nice
Get er done chad 🍺
Trying
Chad. Would you let me know where you got your Cabmate airride system. I have an 1985 362 Pete that to convert to air ride. Appreciate a comeback!
Hot me up in the email @ (chadkeegan@live.com) and I’ll get you the direct link
Good job!
Thanks Randy
Chad watch out for them loose mink running around up there😳😳😳
Never seen any
@@1ChadKeegan Someone released 40,000 of them somewhere in northern Ohio from a mink farm.
@@raymondbradley6788 I’ll google it and let you know what I find out
I watch your video when I get off the road, I’m sure it’s a good one. Hell they all are brother😎😎😎👍👍👍
Also James Pretty needs to help you out more. You're always in his videos
Lol
Trust me if Chad needed his help James would definitely be their trust that.
@@keepontruckinoutlawlife1248 exactly but some people don’t hear when I say I don’t like help 😂
@@keepontruckinoutlawlife1248 I'm sure he doesn't need help. We all know he's good at what he does. Still having Pretty there would be nice. Nothing more, nothing less.
@@BDW0000 🤘🏻
I thought you got rid of all that junk
Nobody wanted it 😂 where you been 🥴
You talk to me with respect sir
@@BDW0000 who are you again? Couldn’t find your channel… 😉
@@1ChadKeegan Funny. Like your channel buddy!
@@BDW0000 always
Video way too long
You should come edit it for me then 🥴
@@1ChadKeegan make two videos then
@@robertfranki5477 next time, it was 2 full days worth of work and over 2hrs worth of footage cut down.
@@1ChadKeegan perfect I think. Definitely after a hard day of work myself. Appreciate ya bud
@@keepontruckinoutlawlife1248 thanks buddy
Be nice if someone who smokes less meth would do a video on the same topic….
I’ve never smoked meth so you can take your opinion and shove it. Go make a video better if you don’t like it.
And one time I dug to China for a fresh egg roll …. I believe I will.
@@slicksiderepairllc2822 well it’s a simple set up you should have no problems figuring it out. Ask them for ups shipping so fed ex doesn’t damage or lose it like they did with mine.