I really enjoy your videos, not because probably ever I'll get to work on steam engines but because of your careful and methodical explanations. I have a MG Midget and work on it myself and you have many machining tips and wise ways of doing repairs that applicable to me. I really enjoy watching a craftsman at work.
When I put together a steam engine plant about 10 years ago now, I solved the issue with the open drain cocks making a mess on the base board of the plant by piping them all to an oil sump.
Keith, I'm shocked that a man in West Yorkshire doesn't know that the very best scissors are made by Ernest Wright and Co, in Sheffield. Proper scissors, traditionally made!
About the Rustiest Pair of Scissors; Do they happen to be WISS brand? They made great scissors. Don't know if they still do. But the do make sheet metal sheers and tin snips. Very good ones too. -- Too bad yours rusted so much. Maybe do a video on nickel plating??? ;-)
They've been called drain cocks for over two centuries. A little late to suggest changing the terminology just to suit the PC police. Drain cocks,Gudgeon pin,Gib and cotter. All old terms because they are used in old technology. Correct terminology adds another historical element which adds immensely to Mr. Appleton's description of what he is doing and why. These early terms add an incredible dimension to Keith's work and are historically accurate.
I really enjoy your videos, not because probably ever I'll get to work on steam engines but because of your careful and methodical explanations. I have a MG Midget and work on it myself and you have many machining tips and wise ways of doing repairs that applicable to me. I really enjoy watching a craftsman at work.
When I put together a steam engine plant about 10 years ago now, I solved the issue with the open drain cocks making a mess on the base board of the plant by piping them all to an oil sump.
Would it be within reason to plumb the draincocks to a collection tub rather than letting them drain all over the engine?
Great videos! How is the mahogany lagging attached to the cylinder? Thanks.
Cyanoacrylate Adhesive - I've shown this process in a few videos ......
Keith, I'm shocked that a man in West Yorkshire doesn't know that the very best scissors are made by Ernest Wright and Co, in Sheffield. Proper scissors, traditionally made!
About the Rustiest Pair of Scissors; Do they happen to be WISS brand? They made great scissors. Don't know if they still do. But the do make sheet metal sheers and tin snips. Very good ones too. -- Too bad yours rusted so much. Maybe do a video on nickel plating??? ;-)
Your videos are wonderful - so many little tips.
They've been called drain cocks for over two centuries. A little late to suggest changing the terminology just to suit the PC police. Drain cocks,Gudgeon pin,Gib and cotter. All old terms because they are used in old technology. Correct terminology adds another historical element which adds immensely to Mr. Appleton's description of what he is doing and why. These early terms add an incredible dimension to Keith's work and are historically accurate.
Great. I drilled my drain cock holes all the way through with the 5/32”. Hopefully it won’t be a problem.
not unless the Silicone "O" ring (if fitted) on the piston passes over the hole . . . . .
Keith I notice there are no brass band on the cylinder.Q,How is the wood around the cylinder held on.
The wood is a tight fit and held with adhesive
That gasket method is pretty ingenious. ;)
alas it was not my idea - a viewer suggested it, I tried it and it works :-))))
Ah yes, that viewer was me. :D
I am pleased to see that it works for you!
Thanks {:-)))))))
You forgot to note, deburring the inside sharp edge of the holes you drilled. Other wise you risk damage to your silicone o-ring!
Oh God nooooooo . . . . what is "Demurring" anyway ? Life will never be the same again ......
Keith Appleton sorry. Deburring. Fat fingers.
}:-)))
well done.
Dribbling drain cocks are not good. Love your channel Keith.
He's on about incompetence, sorry, incontinence again..
you have the wrong die for flush fit threads. surface grind the back side of the die, and flip it around to finish
I would just flip the die anyway . . . .