Nice review, the problem I have with all the sit stand desks is the tops are all kind of ugly looking. I was looking at the higher end desk and I’m glad I seen what the bamboo looks like because I almost bought it, glad I didn’t 😅
It’s still very stable but the higher it goes you will notice some wobble. This is most obvious at it highest point which is at 50-1/2 inches. Anything below 40 inches has very little wobble unless you’re really trying.
@@MoonRiderTech ah as I expected. Is it possible to assemble it without the third leg? Does the instruction allow it in case you suddenly lack space ? Assuming I would get a different table top
@@Gigatless You mean forgo the L design? Unfortunately you aren’t able to do that as the main frame piece is longer than the single 47” long table top, and the second, shorter frame attachment only works with the main frame. You could look into the regular E7. That has various single desk top sizes like 48x24, 48x30, 55x28, 60x24, 72x30 and 80x30.
@@MoonRiderTech so table top is the only issue here, right ? Like the power supply and motors can do their job property in a dual mode? Honestly I don't like the original colors and wanted to make my own table top
Oh right, sorry! Missed that last part you’d get your own table top. I can’t test that to confirm. I did try disconnecting the cable for the 3rd motor and the control panel errors out if I try to raise it (even minority which is what I was trying to do) Problem is I’m not sure if it would error out regardless once you try to use the panel with only 2 motors running, or because it’s experiencing resistance.
The PC in this video is my wife's. Hers is identical to mine with the exception of a Zotac RTX 3070 Twin Edge. As for the rest of the parts: 32GB DDR4 T-Force Dark Za ram, Ryzen 7 5800X, Asrock B550M Pro 4 motherboard, Cooler Master Hyper 212 RGB CPU air cooler, EVGA 700W power supply.
@@MoonRiderTech I have ZERO idea, how this comment got on this video 🤦🏿♂️🤦🏿♂️🤦🏿♂️🤦🏿♂️ seriously, this was supposed to be on a Luke Stephens video, idk what happened
I mention in the video that we’ll rework the space in the future when she has more of a plan for what she wants in the space and we can save up for it all 🤷🏻
Amazing as always you always give me new ideas for my future setup
"Nintendo Helped Me Cheat" Well there is a headline nobody ever thought they would hear/read 😆😆😆😆
Hopefully the Palworld suit preoccupies them enough for that to slip under their radar...
1:14 We getting Zombieland with this one🤣
It is Spooky Season
Thanks for the upload. I always love the narrations!
Thanks for the support! I'm glad you enjoy them.
Nice review, the problem I have with all the sit stand desks is the tops are all kind of ugly looking. I was looking at the higher end desk and I’m glad I seen what the bamboo looks like because I almost bought it, glad I didn’t 😅
Hey after 3 weeks what can you tell about the standing stability of the table?
It’s still very stable but the higher it goes you will notice some wobble. This is most obvious at it highest point which is at 50-1/2 inches. Anything below 40 inches has very little wobble unless you’re really trying.
@@MoonRiderTech ah as I expected. Is it possible to assemble it without the third leg? Does the instruction allow it in case you suddenly lack space ? Assuming I would get a different table top
@@Gigatless You mean forgo the L design? Unfortunately you aren’t able to do that as the main frame piece is longer than the single 47” long table top, and the second, shorter frame attachment only works with the main frame. You could look into the regular E7. That has various single desk top sizes like 48x24, 48x30, 55x28, 60x24, 72x30 and 80x30.
@@MoonRiderTech so table top is the only issue here, right ? Like the power supply and motors can do their job property in a dual mode? Honestly I don't like the original colors and wanted to make my own table top
Oh right, sorry! Missed that last part you’d get your own table top. I can’t test that to confirm. I did try disconnecting the cable for the 3rd motor and the control panel errors out if I try to raise it (even minority which is what I was trying to do) Problem is I’m not sure if it would error out regardless once you try to use the panel with only 2 motors running, or because it’s experiencing resistance.
I like your extended mouse pad! Where did you buy it? Can you send me the link, please?
Hi, here's the link. Enjoy! a.co/d/i6dRRZZ
Please explain the light behind the monitors
They're Govee Flow Bars. Here's the link: a.co/d/hT24RhF
i just got this desk and the fastening plate holes don’t even match…
Where did you get the cat mouse pad from please at 11:10 ?
From Amazon US, here’s the link a.co/d/eRe8jNP
What gaming pc you have? What rtx?
The PC in this video is my wife's. Hers is identical to mine with the exception of a Zotac RTX 3070 Twin Edge. As for the rest of the parts: 32GB DDR4 T-Force Dark Za ram, Ryzen 7 5800X, Asrock B550M Pro 4 motherboard, Cooler Master Hyper 212 RGB CPU air cooler, EVGA 700W power supply.
Nice video m8
Hello friend from Viet Nam
👋👋👋
Prefer the old desk tbh
Comment deleted
What does this video have to do with Suicide Squad? 😂
@@MoonRiderTech I have ZERO idea, how this comment got on this video 🤦🏿♂️🤦🏿♂️🤦🏿♂️🤦🏿♂️ seriously, this was supposed to be on a Luke Stephens video, idk what happened
😂😂😂 All good! I thought you might be trolling in a bizarre way so I respect the explanation 👍
Dimension of Each Part?
halppp!! you ruined her desk 😂 now it's just another gamer bro's set up before has her own personality atleast. goodluck signing that papers
I mention in the video that we’ll rework the space in the future when she has more of a plan for what she wants in the space and we can save up for it all 🤷🏻
stop being stupid