Hey if Anyone Is Having Trouble Listen Up!!!!!!!!! Plug in the wifi extender beside your router (This is just for setup you can move after) and hold down wps button until it flashes Then click the wps button on your router. Once all the flashing stops they should be synced. Now the wifi that needed a password should be unlocked and you get sent into the setup portal. And after setup you can plug into where ever dead zone is affected. And product should work as intended I hope this helps.
I followed your instruction and used the wps buttons and it paired with my Verizon router but it did not take me to the setup portal. what am I doing wrong? thanks
I bought this July 2023, worked like a charm. Switched telecommunications providers 4 days ago, so I had to reset this wifi extender. Once I reset the device I could not connect to either the 2.4/5G netoworks. It says "connected without internet." I threw out the old manual, didn't think I needed to keep it as the initial setup was easy. Judging by the comments here, it seems we're all experiencing issues with this device.
Hi! I had problems to connect the repeater to my laptop on the network. I followed the steps, but I had no network. I solved the problem by connecting my phone first on the network. Then I went back to connect my laptop. I hope my solution helps.
Hey if Anyone Is Having Trouble Listen Up!!!!!!!!! Plug in the wifi extender beside your router (This is just for setup you can move after) and hold down wps button until it flashes Then click the wps button on your router. Once all the flashing stops they should be synced. Now the wifi that needed a password should be unlocked and you get sent into the setup portal. And after setup you can plug into where ever dead zone is affected. And product should work as intended I hope this helps.
I have the Edtiske Extender Model Number: LCX-ZJ1200-03 and it has two ports, one says Wan port and the other a Lan port , So my question is which port do I use on the extender to connecting to the router with network cable. Instruction doesn't say :0( and what's the difference between the two ports on the extender ¿? Thanks for any answers ChEeRs
After connecting the main signal no menu pops up I'm just connected to the main 5 g and can't go forward to get the extended. I been workin on this for over an hr. 😢
Can multiple extenders be used? Say one on either end of the house to extend the connection in both directions or do too many connections complicate the extender path?
My phone recognizes the 2.4 and 5g but the menu doesn't pop up instantly like in the video at the 59 sec mark. Setting up with laptop seems really difficult. Why is this so hard ?
@@chloeb9417 I bought a tp link AC1200 wifi extender from best buy , early black Friday deal for the same price as the Amazon one in this video. I downloaded the TP link tether app and linked it up , it works really well.
Yea same no portal for me neither and no help anywhere. Even on my friends iphone it wont work. Just asks for a password like any other wifi connection. Cant get into the portal page to actually set it up. Ffs i can log into any wendys free wifi in america but not one wifi extender.
That looks super easy to set up! Thanks for the step-by-step guide. Can you tell me how the Wi-Fi signal strength is now in your bedroom compared to before using the extender? Did you notice a significant improvement in speed and coverage?
Hey if Anyone Is Having Trouble Listen Up!!!!!!!!! Plug in the wifi extender beside your router (This is just for setup you can move after) and hold down wps button until it flashes Then click the wps button on your router. Once all the flashing stops they should be synced. Now the wifi that needed a password should be unlocked and you get sent into the setup portal. And after setup you can plug into where ever dead zone is affected. And product should work as intended I hope this helps.
Mine worked perfectly for a month and now when you connect to it it would work for an hour or so and just stop any connection. You need to unplug it and put it back in and the same thing will happen again roughly the same time later it’s a pain in the arse.
Thank you for sharing my friend. I am looking for something similar here in UK on Amazon, and hoping this may will work. I need to extend my WiFi Signal to my Man-Cave, which is around 15M (45' Ft Approx) away from the house. I got two other in place all over the house, but they are not strong enough to boost that far. Nevertheless, thank you again for sharing. I believe *_Our World_* is a *_Shared Experience_* Remember *_Life-_*_ is _*__Short_* so, *_Live Long_* and *_Prosper_* ... 🖖... Cheers!!!
Can you uninstall it, and install it again, please.? I can't get it to go to the setup page after selecting 2.4G or 5G in the wifi dropdown box. Thanks
Hi is it better for the wifi extender to be near your PC/phone or does it work more effectively when near the Wifi router? I have the exact same model:
You’re going to want to test out proximity. If it’s too far frog the router the signal will be too weak. I’d say try halfway and see how that works. Worked well for me
This seems to be a pretty hit or miss product. Ive had many extenders in the past and none have giving me this mucb trouble to set up. Seems some people have zero issues while others like myself do.
Its trash. Had it for 2 months took forever to get to even function and it worked periodically and would disconnect and the lights flash and you have to set it up all over again. Pretty much useless, i ended up buying tp-link extender and it worked fine right out the box, easy set up and zero issues. Lesson learned on buying the cheapest extender... dont.
Hey if Anyone Is Having Trouble Listen Up!!!!!!!!! Plug in the wifi extender beside your router (This is just for setup you can move after) and hold down wps button until it flashes Then click the wps button on your router. Once all the flashing stops they should be synced. Now the wifi that needed a password should be unlocked and you get sent into the setup portal. And after setup you can plug into where ever dead zone is affected. And product should work as intended I hope this helps.
Hey if Anyone Is Having Trouble Listen Up!!!!!!!!! Plug in the wifi extender beside your router (This is just for setup you can move after) and hold down wps button until it flashes Then click the wps button on your router. Once all the flashing stops they should be synced. Now the wifi that needed a password should be unlocked and you get sent into the setup portal. And after setup you can plug into where ever dead zone is affected. And product should work as intended I hope this helps.
There is a WPS/Reset button on the front of the unit. Plug the unit into the wall. Wait for the system light to flash. Hold down the WPS/Reset button for about 5-10 seconds. Release. Wait for the system to reboot.
I dont get it man? I cant Connect. I cant get into the portal. No matter what i click. It makes me type a password into the extender. And wont let me access public portal.
Hey if Anyone Is Having Trouble Listen Up!!!!!!!!! Plug in the wifi extender beside your router (This is just for setup you can move after) and hold down wps button until it flashes Then click the wps button on your router. Once all the flashing stops they should be synced. Now the wifi that needed a password should be unlocked and you get sent into the setup portal. And after setup you can plug into where ever dead zone is affected. And product should work as intended I hope this helps.
@@amazingrandomproductsim on Android. And there is no interface like there is on iphone to sign in. Just the wifi extender name. And u have to entet password. Like u cant get to the part where u see all your networks
Watch my video again and follow it closely! It asks for your password for the Wi-Fi. And then it uses that same password for the extender. Let me know if that helps! Triple check your upper and lower case and all of that. Case sensitive. It can be a tad tricky at first.
@@amazingrandomproductsIt keeps saying my password is incorrect. I double checked and typed in password for the wifi network into its own connection itself and it worked fine. This extender does NOT recognize my wifi's password.
@@amazingrandomproducts Hi, this extender asked me for a PIN but it wouldn't work. I then put the ethernet cable from the router into the extender. Ever since McAfee states my wi-fi is under attack. How do I get pass the PIN as it makes my network unsecure?
@@Charlie-xd1vj nah I gave up for now. I will try again in a few months at my parents house to see if the extender is the problem or my wifi/modem/router settings. I find it hard to find a solution with so many possible suspects
@@Charlie-xd1vjbro me too. I got it in august. Just today it randomly stopped working. I redid the process but it says there no internet on them did u fix it?
Hey if Anyone Is Having Trouble Listen Up!!!!!!!!! Plug in the wifi extender beside your router (This is just for setup you can move after) and hold down wps button until it flashes Then click the wps button on your router. Once all the flashing stops they should be synced. Now the wifi that needed a password should be unlocked and you get sent into the setup portal. And after setup you can plug into where ever dead zone is affected. And product should work as intended I hope this helps.
One of the reasons for that might be that you have your routers WIFI MAC Address whitelist turned on and you haven't included the virtual MAC address of the device you're trying to connect to the internet. . I was unable to get Internet access due to having my whitelist turned on (In other words, only devices that have their MAC address listed in the whitelist can connect to the router). If you turn the whitelist OFF you should see the internet light come on and have access to the internet through the extender. HOWEVER, the added security of using the MAC address whitelist filter will be disabled if you allow ALL MAC Addresses to connect to your router. I still have not been able to find what the virtual MAC address is for each device I want to connect to the extender and router.
I am an EE and software engineer since 1973 and I can tell you that all communications products are consumer vicious requiring a network engineer to set up. That's why they get $1500 a day.
Hey if Anyone Is Having Trouble Listen Up!!!!!!!!!
Plug in the wifi extender beside your router (This is just for setup you can move after)
and hold down wps button until it flashes
Then click the wps button on your router. Once all the flashing stops they should be synced. Now the wifi that needed a password should be unlocked and you get sent into the setup portal. And after setup you can plug into where ever dead zone is affected. And product should work as intended I hope this helps.
My router is eero and doesn’t have wps button
I followed your instruction and used the wps buttons and it paired with my Verizon router but it did not take me to the setup portal. what am I doing wrong? thanks
My router is linked with the extender but it didnt show up the portal please help.
@@brianboughter1040 you just click the wifi name to enter password and it should send to portal. Unless they didint connect
@@r4wp Click wifi network name and it should say sign in and click that like your signing into free wendys wifi
setup page doesnt even pop up
would have liked to have seen you check the speed and signal strength before and after installation!
My before is 160 MBPS on the regular WiFi and the extenders is 68 MBPS. Kind of a down grade. I just set it up so might have to return it
just bought this and none of that is showing up
WHAT APP IS BEST FOR THIS DEVICE
I like the way it makes your plug socket look like a startled man.
😂😂😂😂😂
Hahahahahahaha! Yes! I thought the same & glad it wasn't just me
I bought this July 2023, worked like a charm. Switched telecommunications providers 4 days ago, so I had to reset this wifi extender. Once I reset the device I could not connect to either the 2.4/5G netoworks. It says "connected without internet." I threw out the old manual, didn't think I needed to keep it as the initial setup was easy. Judging by the comments here, it seems we're all experiencing issues with this device.
I can't get it to work & the instruction manual is useless. This video doesn't help because I'm not getting any of the same options.
Hi! I had problems to connect the repeater to my laptop on the network. I followed the steps, but I had no network. I solved the problem by connecting my phone first on the network. Then I went back to connect my laptop. I hope my solution helps.
This extender ask password and when ever I entered it says in correct how I don’t understand same router I think some thing wrong with this
Hey if Anyone Is Having Trouble Listen Up!!!!!!!!!
Plug in the wifi extender beside your router (This is just for setup you can move after)
and hold down wps button until it flashes
Then click the wps button on your router. Once all the flashing stops they should be synced. Now the wifi that needed a password should be unlocked and you get sent into the setup portal. And after setup you can plug into where ever dead zone is affected. And product should work as intended I hope this helps.
Thank you very much for the video, I was able to install it the first time, and the internet extender works very well 👌🏻 blessings 🙏🏻🙏
I have the Edtiske Extender Model Number: LCX-ZJ1200-03 and it has two ports, one says Wan port and the other a Lan port , So my question is which port do I use on the extender to connecting to the router with network cable. Instruction doesn't say :0( and what's the difference between the two ports on the extender ¿? Thanks for any answers ChEeRs
The supplied password doesn't work
Thanks for your easy explanations, worked the first time
I have Ethernet Cable and it’s Connected to the extender and the wifi is still weak please help
Can you also use the 2 Ethernet ports at the bottom to plug in to your computer?
did you find out if that worked? i have the same problem and would like to know
After connecting the main signal no menu pops up I'm just connected to the main 5 g and can't go forward to get the extended. I been workin on this for over an hr. 😢
What about the PIN, does it not need one?
Can multiple extenders be used? Say one on either end of the house to extend the connection in both directions or do too many connections complicate the extender path?
Mine didn't work as it said wifi not secure do I need VPN
I'm using a Repeater I just got. I'm supposing the premise is the same. Thanks for the tips this is so much simpler than I originally thought. 🥳
I'm trying to reinstall it. I selected the 5G and it didn't bring me to the setup page. It just said it couldn't connect to the internet
Did you work out how to solve this, im having the same problem.
Does it automatically switch between the extender and your router?
I plugged the repeater in right beside my router, went to my phones wifi networks and the network isn't showing up.
Super frustrating.
My phone recognizes the 2.4 and 5g but the menu doesn't pop up instantly like in the video at the 59 sec mark. Setting up with laptop seems really difficult. Why is this so hard ?
Did you work out how to do this, I'm having the same problem
@@chloeb9417I didn't figure it out. I returned it to Amazon, sadface,,
@@chloeb9417 I bought a tp link AC1200 wifi extender from best buy , early black Friday deal for the same price as the Amazon one in this video. I downloaded the TP link tether app and linked it up , it works really well.
Yea same no portal for me neither and no help anywhere. Even on my friends iphone it wont work. Just asks for a password like any other wifi connection. Cant get into the portal page to actually set it up. Ffs i can log into any wendys free wifi in america but not one wifi extender.
Did anyone resolve this? No 5G option anymore seems like scam
That looks super easy to set up! Thanks for the step-by-step guide. Can you tell me how the Wi-Fi signal strength is now in your bedroom compared to before using the extender? Did you notice a significant improvement in speed and coverage?
I had never tried an extender before. For me it was a night and day extreme improvement in both speed and reliability
It’s not showing up on my wifi list. How do you add it?
Hey if Anyone Is Having Trouble Listen Up!!!!!!!!!
Plug in the wifi extender beside your router (This is just for setup you can move after)
and hold down wps button until it flashes
Then click the wps button on your router. Once all the flashing stops they should be synced. Now the wifi that needed a password should be unlocked and you get sent into the setup portal. And after setup you can plug into where ever dead zone is affected. And product should work as intended I hope this helps.
Thank you, worked perfectly
This is exactly what I need
Much thanks
How do I change it because I changed my Wi-Fi router
Is there any way to set this up without a cell phone?
after picking 5g, says I have no internet and nothing happens
My wifi virgin media 1 gig fibre and from this extender I’m getting only 60mbps download and 34mbps upload speed , how to get 1 gig on this extender ?
Does anyone else not see the extender on the select Wi-Fi area
Mine worked perfectly for a month and now when you connect to it it would work for an hour or so and just stop any connection. You need to unplug it and put it back in and the same thing will happen again roughly the same time later it’s a pain in the arse.
What's the speed of ethernet ports. Can't find any indo on that
Would have been nice to see like a before and after speed test.
Is a app that you have to download?
I bought the same thing but I would like to have a differente password on this one. I don't see where I can do it. Can you help me?
so helpful thank you. way more helpful than the instruction manual.
Thank you for sharing my friend. I am looking for something similar here in UK on Amazon, and hoping this may will work. I need to extend my WiFi Signal to my Man-Cave, which is around 15M (45' Ft Approx) away from the house. I got two other in place all over the house, but they are not strong enough to boost that far. Nevertheless, thank you again for sharing. I believe *_Our World_* is a *_Shared Experience_*
Remember *_Life-_*_ is _*__Short_* so, *_Live Long_* and *_Prosper_* ... 🖖... Cheers!!!
how to hard restart it
The set up is not coming up
Can you uninstall it, and install it again, please.? I can't get it to go to the setup page after selecting 2.4G or 5G in the wifi dropdown box. Thanks
me either - did you get it figure out?
Before and after speeds would have told me everything I needed to know
Hi is it better for the wifi extender to be near your PC/phone or does it work more effectively when near the Wifi router?
I have the exact same model:
You’re going to want to test out proximity. If it’s too far frog the router the signal will be too weak. I’d say try halfway and see how that works. Worked well for me
Yeah, my question is, how exactly can you tell that it's now "working"? I haven't really seen much of a change, if in honest... 🤷🏻♀️
Wifi speedtest
So if you don't have a cell phone this is garbage??
Delivering tomorrow, trying to get wifi to my garage. hope it works.
🤞
How to connect on a New wifi?
Is this compatible with a ps5
Very helpful 😎
how to hard reset
This seems to be a pretty hit or miss product. Ive had many extenders in the past and none have giving me this mucb trouble to set up. Seems some people have zero issues while others like myself do.
Its trash. Had it for 2 months took forever to get to even function and it worked periodically and would disconnect and the lights flash and you have to set it up all over again. Pretty much useless, i ended up buying tp-link extender and it worked fine right out the box, easy set up and zero issues. Lesson learned on buying the cheapest extender... dont.
does this work for slow wifi?
It should work. But it won’t speed up the WiFi
If the WiFi is slow because your too far from tue router this WILL speed it up
I am trying to connect the repeater to my PC using ethernet and it is not working. Any tips?
Hey if Anyone Is Having Trouble Listen Up!!!!!!!!!
Plug in the wifi extender beside your router (This is just for setup you can move after)
and hold down wps button until it flashes
Then click the wps button on your router. Once all the flashing stops they should be synced. Now the wifi that needed a password should be unlocked and you get sent into the setup portal. And after setup you can plug into where ever dead zone is affected. And product should work as intended I hope this helps.
Where did you get the password.
Hey if Anyone Is Having Trouble Listen Up!!!!!!!!!
Plug in the wifi extender beside your router (This is just for setup you can move after)
and hold down wps button until it flashes
Then click the wps button on your router. Once all the flashing stops they should be synced. Now the wifi that needed a password should be unlocked and you get sent into the setup portal. And after setup you can plug into where ever dead zone is affected. And product should work as intended I hope this helps.
Can you change the password?
can you add a password to the new signal?
How do I factory reset this device
There is a WPS/Reset button on the front of the unit. Plug the unit into the wall. Wait for the system light to flash. Hold down the WPS/Reset button for about 5-10 seconds. Release. Wait for the system to reboot.
Anyone know where I can find the password
Hi everyone, if you have the issue it asking for your password, use your mobile data instead of wifi and then the page should appear automatically
I dont get it man? I cant Connect. I cant get into the portal. No matter what i click. It makes me type a password into the extender. And wont let me access public portal.
Hey if Anyone Is Having Trouble Listen Up!!!!!!!!!
Plug in the wifi extender beside your router (This is just for setup you can move after)
and hold down wps button until it flashes
Then click the wps button on your router. Once all the flashing stops they should be synced. Now the wifi that needed a password should be unlocked and you get sent into the setup portal. And after setup you can plug into where ever dead zone is affected. And product should work as intended I hope this helps.
Don’t work on my ps5
Does not work for me
First step is a no go. The 2.4G and 5 G networks are both locked. I need a password to open them. Where do I get this from.
It’s going to be your password for your original wireless router network
@@amazingrandomproducts
This is incorrect.
@@amazingrandomproductsim on Android. And there is no interface like there is on iphone to sign in. Just the wifi extender name. And u have to entet password. Like u cant get to the part where u see all your networks
Press and hold the wps reseet button on the extender. It will reset the extender and password would be removed
Keeps telling me my password is wrong? Don't get this me.
Amazing way to teach. Thank you.
It’s asking for a password and it’s NOT my wifi password😢
Watch my video again and follow it closely! It asks for your password for the Wi-Fi. And then it uses that same password for the extender. Let me know if that helps! Triple check your upper and lower case and all of that. Case sensitive. It can be a tad tricky at first.
Didn't ask me for a password and it is connected but with no internet
@@amazingrandomproductsIt keeps saying my password is incorrect. I double checked and typed in password for the wifi network into its own connection itself and it worked fine. This extender does NOT recognize my wifi's password.
Same
@@amazingrandomproducts Hi, this extender asked me for a PIN but it wouldn't work. I then put the ethernet cable from the router into the extender. Ever since McAfee states my wi-fi is under attack. How do I get pass the PIN as it makes my network unsecure?
I can connect but it does not have Internet... signal is max but no internet. Seriously frustrated with this shit
Did you manage to fix this? Having the exact same issue (and even more annoyingly it worked for 2 months and has randomly stopped working)
@@Charlie-xd1vj nah I gave up for now. I will try again in a few months at my parents house to see if the extender is the problem or my wifi/modem/router settings. I find it hard to find a solution with so many possible suspects
@@Charlie-xd1vjbro me too. I got it in august. Just today it randomly stopped working. I redid the process but it says there no internet on them did u fix it?
Man I'm seeing a ton of negative reviews on this product.
not super simple what happened for you was not my experience. worst buy
Hey if Anyone Is Having Trouble Listen Up!!!!!!!!!
Plug in the wifi extender beside your router (This is just for setup you can move after)
and hold down wps button until it flashes
Then click the wps button on your router. Once all the flashing stops they should be synced. Now the wifi that needed a password should be unlocked and you get sent into the setup portal. And after setup you can plug into where ever dead zone is affected. And product should work as intended I hope this helps.
So I must own a phone worth hundreds of dollars to set up a fifty dollar extender...................that doesn't make cents.
Cents?
What devices are you connecting to it?
Your Pathetic
The internet icon doesn’t glow for me 😢
One of the reasons for that might be that you have your routers WIFI MAC Address whitelist turned on and you haven't included the virtual MAC address of the device you're trying to connect to the internet. . I was unable to get Internet access due to having my whitelist turned on (In other words, only devices that have their MAC address listed in the whitelist can connect to the router).
If you turn the whitelist OFF you should see the internet light come on and have access to the internet through the extender. HOWEVER, the added security of using the MAC address whitelist filter will be disabled if you allow ALL MAC Addresses to connect to your router. I still have not been able to find what the virtual MAC address is for each device I want to connect to the extender and router.
Nothing that is in the videos exists ...lol
I am an EE and software engineer since 1973 and I can tell you that all communications products are consumer vicious requiring a network engineer to set up. That's why they get $1500 a day.
Did this but it always has very low signal strength regardless of where i put it amd it also disconnects at random times