I got the spigen glasstr ez fit protector for my iPhone 13 pro max and i have my unboxing for this as well on my channel. Best screen protector in the market!!!!!! great job Spigen.
WOW that was the easiest thing I have ever done with these darn screen protector. Thank you I love draw the line down the middle hint it made the protector land without bubbles!!!!! 🤩🤩🤩🤩🤩
its not completely necessary but also necessary at the same time, if you’re willing to spend a few extra 20 dollars or so you should, it evens out the uncomfortable feeling of the individual lens on your hands & fingers & of course protects them
C It’s like this you’ve got the lip and the sticker then at this point since of the sea has been flipped yeah maybe that’s not right no this is showing you to put it down and then you smooth it was a sticker and if you went back off I don’t know it’s confusing but there’s two that’s right someone comes off at the end of it I understand my confusion is this true layers it looks like one layer comes off there but another way comes off there I think it’s confusing that’s showing us if you want to separate the layers but I think it’s just Saint put it down if you put it down that’s on the bottom that’s sticky does that comes off and this comes off this to stickiness on both sides
Hey Phillip just wondering when will you be uploading a driving POV of the Tesla Model 3? Since I used your referral code and you said you would upload a video just for me last time. Thanks
Get a lifeproof, it’s got a killer screen protector built in and waterproof protection. Much better than otterbox defender too. Otterbox shit the bed recently, quality went way down. I got a otterbox for my iPad mini 6, and it’s a pos like legit straight up doesn’t sit tight , rubber has gaps , I had to replace the screen protector that’s built in with a tempered one because the built in one doesn’t sit flat on the screen. This leaves a big ass gap for dust to collect under. Also don’t get any screen protector that has cutouts for camera or sensors. You don’t need the cutouts infact they lead to dust getting trapped , and they also offer much less protection. Fuck cutouts fuck otterbox lifeproof is cum dumpster worthy gang gang boomerang
When I received my new iPhone 13 Pro, I tried to remove the air bubbles caused by a tempered screen protector. I used my finger to swipe hard against the glass with around 10 pounds of pressure. Do you think I have compromised the screen integrity?
I found that if you put a little vegetable oil on a cu tip and lift the edge of the screen saver where the bubble is and apply the oil it works great and got rid of my 3 bubbles don't need much oil on cu tip
@@VATOOUT uhhh they put it on at the cell phone store so you don’t have to buy the stupid screen protector- but if you don’t wanna look into it then carry on with your 4lb otter box that nobody’s carried since 2011
Thanks I did it step-by-step with your video guiding me! And not even one bubble!! God bless you
Thanks Phil! Your tutorial worked perfectly for me!
The Ed’s.
L
That alignment tool is lit
im doing mine today. comes with 2 because ill somehow mess up... lets hope for the best
does it affects front cam quality? because the lens was also covered by the screen protector
I got the spigen glasstr ez fit protector for my iPhone 13 pro max and i have my unboxing for this as well on my channel. Best screen protector in the market!!!!!! great job Spigen.
Thanks so much for this video! This screen protector is great!
Thank you !! I did it and it was perfect , without bubbles .
Zvjll
So… just did this and worked great. But how do it hear my phone now since the ear speaker is covered by the glass?! Am I doing something wrong?
The guide thing is awesome. Which mine came with that
WOW that was the easiest thing I have ever done with these darn screen protector. Thank you I love draw the line down the middle hint it made the protector land without bubbles!!!!! 🤩🤩🤩🤩🤩
Thank you so much for explaining it perfectly, I was so afraid of doing so....it was perfectly executed :D
Beautiful vid. Thanks 👍🏾
Okay you made it look easy but I’m still nervous lol
great description
I’m getting the iPhone 13 Pro Max 512GB Sierra blue
Just got my 13 Pro, very pleased with the photo quality but wish it had a bigger zoom like the S21 Ultra.
@@tommyharris5817 nice 👍🏻
@@tommyharris5817 what colour did you get?
@@jaywhite1141 graphite
@@tommyharris5817 nice 👍🏻
Do you recommend also using a lens protector for the camera?
I have personally never used one.
@@FuriousTechnology because they only came out for the new phones
its not completely necessary but also necessary at the same time, if you’re willing to spend a few extra 20 dollars or so you should, it evens out the uncomfortable feeling of the individual lens on your hands & fingers & of course protects them
@@denmarrx8355 thanks for your input, any suggestions on which lease protectors?
Camera lens are protected by sapphire crystal so it's pretty much impossible to scratch them under any normal circumstances.
C It’s like this you’ve got the lip and the sticker then at this point since of the sea has been flipped yeah maybe that’s not right no this is showing you to put it down and then you smooth it was a sticker and if you went back off I don’t know it’s confusing but there’s two that’s right someone comes off at the end of it I understand my confusion is this true layers it looks like one layer comes off there but another way comes off there I think it’s confusing that’s showing us if you want to separate the layers but I think it’s just Saint put it down if you put it down that’s on the bottom that’s sticky does that comes off and this comes off this to stickiness on both sides
Thank you so mach i did it and no bubbles 👍🙏
Does the screen protector affect Face ID and Front Camera?
No
no, instead it protects the face ID and Front camera.
obviously not tf if it did that would be a trash iphone
I COULD NOT GET 3 SMALL BUBLES OUT. HOPEFULLY THEY WILL DISSAPEAR BY MORNING ... THANK YOU FOR SHOWING US HOW TO INSTALL...
Did they disappear
Hey Phillip just wondering when will you be uploading a driving POV of the Tesla Model 3? Since I used your referral code and you said you would upload a video just for me last time. Thanks
Yes I’m filming it this weekend and will be out early next week. I haven’t forgotten!
@@FuriousTechnology ok sounds great I took delivery of my red model 3 sr+ on wednesday and oh boy its way faster than I thought.
ua-cam.com/video/82krYicvHu8/v-deo.html
@@FuriousTechnology thanks 😊
Have you found that covering the front camera with a screen protector affects the quality?
I bought a full screen protector but i regret it covers the camera and lowers camera quality
What about how cases fit? That looks a really good ‘to the edge’ protector as well. Very impressed with the fit of it. 👍🏻🙂
Yes, what about the case fit?
Get a lifeproof, it’s got a killer screen protector built in and waterproof protection. Much better than otterbox defender too. Otterbox shit the bed recently, quality went way down. I got a otterbox for my iPad mini 6, and it’s a pos like legit straight up doesn’t sit tight , rubber has gaps , I had to replace the screen protector that’s built in with a tempered one because the built in one doesn’t sit flat on the screen. This leaves a big ass gap for dust to collect under. Also don’t get any screen protector that has cutouts for camera or sensors. You don’t need the cutouts infact they lead to dust getting trapped , and they also offer much less protection. Fuck cutouts fuck otterbox lifeproof is cum dumpster worthy gang gang boomerang
Thank you so much
When I received my new iPhone 13 Pro, I tried to remove the air bubbles caused by a
tempered screen protector. I used my finger to swipe hard against the glass with around 10 pounds of pressure. Do you think I have compromised the screen integrity?
It should be fine. The screen is quite strong with pressure.
@@FuriousTechnology Thanks
This helped me
Thank you!!!!!!
What about the case fit?
Great install but bubble at the bottom is a fail 3:15.
Very bad quality of this. I applied yesterday and a lot of bubbles
Legend
I got dust under this because of my fucking cat…how to I remove this now? Lmao
Phones are expensive. I’m glad I still have my 7. World just fine.
I found that if you put a little vegetable oil on a cu tip and lift the edge of the screen saver where the bubble is and apply the oil it works great and got rid of my 3 bubbles don't need much oil on cu tip
Hi Everyone ❤️
Get an OtterBox defender case then you don’t need a screen protector
Or liquid glass
@@melmel3703 liquid glass wtf?
@@VATOOUT uhhh they put it on at the cell phone store so you don’t have to buy the stupid screen protector- but if you don’t wanna look into it then carry on with your 4lb otter box that nobody’s carried since 2011
@@melmel3703 🙄
@@VATOOUT carry on otter box 😂😂😂🤣🤣🤣🤣🤣🤣🤣🤭
It’s so much easier to just buy liquid glass at the cell phone store and let them do it. If it drops and breaks they pay for the screen to get fixed
he don't like bubbles. No hot tube time for him.
Hahahaha the bubbles
Bye bye thick and old iphone design as 5s. It holds much better in the hands of a slim 11Pro
iPhone szkiełka na obiektywy
Karma's a bitch, apple and you'll get yours!
Più di mille euro di telefono, e pellicola da 10 euro pezzente 😂
Does this affect the selfie camera compared to like a screen protector with a cutout?
Selfie cam works fine with this. You don’t notice any difference.