I recently bought yours and Zens Bounce Revolution pack. The sounds are amazing. The pack not only helps me making better music I also get sound design knowledge from the pack too. ❤
Tbh, the glue is doing more than what you actually think Jay. I hear a lot of good compression in it that is glueing the track togather into a cohesive mix. The track before the glue has a lot of transients peaking much higher making it a bit undesirable in my opinion but I'm no pro to audio engineering, just an aspiring musician and that's all. Amazing work as usual. Always here to support you brother!! 💜💜 P.S. The track is already way above 0 db and using the glue on these low settings actually is doing way more because the input signal is way higher that goes into the compressor. It's all about thr signal flow so I think there goes my whole point about glue compression. That's the reason why he used only less threshold to compress the track.
Thanks for this video bro ! The last video on your past channel about mastering helped me a lot and applying that masterchain and my improvisations totally helped me to know more about mastering. Now this one after a long time is gonna help me too and I'm gonna grow my production skills again with you :) Thanks Jay ! It's great that you didn't give up after all these non-sense happened to you, we are with you Jay , no matter what happens now ;)
Yoooo good video🔥i wanna start doing music and this could help me very well. Please more of these analytics :) Stay well and i hope you'll have a great day!
It is totally possible to master a track like this as long as you know what you are doing. It usually is unorthodox to master a track that is literally clipping so hard, but FL Studio works in 32 bit audio which might not make much sense as to what the question. I would recommend to leave headroom before mastering as it let's you push the track more.
I''m curious if you still would Master a track like this now 2+ years later. All i see is a lot of clipping from the master fader and the plugins itself.
I came back here cus i'm currently struggling mastering my own songs and i've been using the 'Pink Noise ozone' tip for a more balanced mix ever since i saw you do it but couldn't find that video no more
Rayos espero que puedas grabar tutoriales en español :/, Si se inglés pero se me facilita mas leerlo que escucharlo y entenderlo al 100. Pero igual viendo que lo tienes tan fluido el inglés puedo intentar aprender las dos cosas, Inglés y producción :D
8:40 , you can actually get away with a cut to remove everything blow 20 Hz instead of 10 Hz as he did in this track , most sub woofers can't play these frequencies anyway. this video is a really good master guide, one of the first people that doesn't start the video with: ''you need like 6000 dB headroom to start your master''
It is unorthodox to master a track thats above 0 dB but Disclosure told there are no rules to making music so.... there goes that. Its only a guideline to master a track beloe 0 dB. Its not a rule.
Nice vid bro, thanks! And i have problem, hopefully you could help me. Since I make music from fl studio mobile, it is not the same to master, or at least isn't that easy. So I don't know if you have a y recommendation or something, I would really appreciate if you could answer me, if not, theres no problem. You are a crack anyway 🔥🔥🔥
Full support for you! Never give up man!
Jay Escar, thank you for not leaving UA-cam and giving us knowledge we don't know about!
True 🙏
I really need a video explaining that track.... it’s freaking insane
I recently bought yours and Zens Bounce Revolution pack. The sounds are amazing. The pack not only helps me making better music I also get sound design knowledge from the pack too. ❤
Please make a mixing tutorial video🔥
Great video, Jay!
I hope you will make a video about melodies, this is a big problem for many producers
two words: pitch bends.
Thank you bro! I needed this
full support for you........love u man.....and really love your music😇
So glad to see you're back, really missed you and your vids man
You are Great Bro ❤️
Nice mastering bro .
our boy killing it 👹💯
Aqui aprendo más que en otros tutoriales, gracias Jay! 🔥🔥
Saludos bro
Please make a breakdown video on this song! i've been thinking about it ever since you released it :D
Tbh, the glue is doing more than what you actually think Jay. I hear a lot of good compression in it that is glueing the track togather into a cohesive mix. The track before the glue has a lot of transients peaking much higher making it a bit undesirable in my opinion but I'm no pro to audio engineering, just an aspiring musician and that's all.
Amazing work as usual. Always here to support you brother!! 💜💜
P.S. The track is already way above 0 db and using the glue on these low settings actually is doing way more because the input signal is way higher that goes into the compressor. It's all about thr signal flow so I think there goes my whole point about glue compression. That's the reason why he used only less threshold to compress the track.
Nice stuff, i really love this kind of videos from you! :) Big up!
Really helpful stuff, although I probably won't remember much while watching at 2 am haha gonna rewatch it tomorrow
I'm so happy you are finally back to making those tutrorials! I really made a big progress watching them!
Another awesome video, i love your songs and content on your channel!
This is actually amazing and super helpful!
Good stuff man!! I enjoyed this one ✌️⛈️
I hope you'll get a lot of your subscriber back, quick review, I think your videos are better than before!
keep it up My mann!
Banger Confirmen🔥✔
Man it's so awesome to see you back here on youtube
Thanks for this video bro ! The last video on your past channel about mastering helped me a lot and applying that masterchain and my improvisations totally helped me to know more about mastering. Now this one after a long time is gonna help me too and I'm gonna grow my production skills again with you :) Thanks Jay ! It's great that you didn't give up after all these non-sense happened to you, we are with you Jay , no matter what happens now ;)
Man's just the einstein of mixing
Early gaaang! Jay, you crazy!
And what do you think about video like "How to make drops more interesting"? 🤨
+
Sure!
Thanks for all Jay!!!!!!!
Yoooo good video🔥i wanna start doing music and this could help me very well. Please more of these analytics :) Stay well and i hope you'll have a great day!
This was really helpful, thanks!
As I can see that your master channel is already clipping so my question is can we master to the clipping track, Why didn't you left any headroom ?
It is totally possible to master a track like this as long as you know what you are doing. It usually is unorthodox to master a track that is literally clipping so hard, but FL Studio works in 32 bit audio which might not make much sense as to what the question.
I would recommend to leave headroom before mastering as it let's you push the track more.
I know SFRNG loves the Invisible Limiter G2 how come you didn't use that one lol. Great vid!
And Jonas Aden too
I will try
Amazing tutorial! Vocal mixing tutorial next?
Oh yeah , another fire 🔥
Your camera / light setup looks soooo good ! Amazing content as always bro, great job
I have an idea jay, why don't you upload all of the tutorial videos of your past UA-cam channel into this..
This might help you get grow again faster
Gulfoss is basically like Ozone's sculptor
Another amazing video by king of Future Bounce! Glad to see you back!
Increible Jay! Me sirve mucho
My bro jayeskar
We did explain it well ;)
Man you are amazing
This was really helpful
Jay eskar is (Au5) of future bounce!
Thanks for this Tut and lots of Love, Jay 🖤🖤
Helped a lot! Gonna master this way xD
Woooooo master chain pog, love your videos Jay! Keep up the great work
Big up brother your a legend! 🚀❤
WET MIX AT 69%
Here is a man of culture boys. But apart from that, great job! Now I really have an idea about what mastering ACTUALLY is. Thank you!
Great video again bro !
great video bro!
Best video i never seen
Love this tutorial! Worth my time. Thanks Jay Eskar!
Brother Please Make a Tutorial On Chakra .
Super helpful 👌🏻
Great tutorial 💯
that is so usefull,thank u Jay for sharing this with us!
Thanks for the great video once again!
Amazing video Jay!!
Wow! bastante interesante, voy a probar algunas cosas en mis proximos masters!
Crazy bro!! Love it!
this is amazing...
Stoping to say I LOVE YOU ❤️😂
LOL all the beans compressed get smashed LOOOOOOOOOL
Dude pörfekt ı love you dude super like kouul🔥❤👍👏👏👏 pörfekt
Jay, has algunos videos en español también, por favor, ¡Un abrazo, bro! ¡EXCELENTE VIDEO!
Hey I love your songs man, espacially the leads. Could you cover how you mix the leads and what you think about when you do it?
2:44 beans
I Looooooooooooove the VintageWarmer 2
Bass sound design tutorial?
Still a banger video in 2024
soo gooddd
Can anyone tell me why the signal before the masterchain it's clipped? Usually my mixdown are -3 db.
I''m curious if you still would Master a track like this now 2+ years later. All i see is a lot of clipping from the master fader and the plugins itself.
Yeah I do
Well kinda not really
@@JayEskarYT Been listening to your songs for years and would love to see an updated version to see your progress
I came back here cus i'm currently struggling mastering my own songs and i've been using the 'Pink Noise ozone' tip for a more balanced mix ever since i saw you do it but couldn't find that video no more
Jay Eskar some delay in your video the image is delayed.
this track Ignite is soooo fckin insane!
🔥🔥🔥
Great One 🔥
You do something after all these steps? Or just rendering it?
I noticed your song was clipping before you put the glue on it, does that mean you do not need headroom to master?
That's what id love to know
Legend 💜
Omg That's so many plugins 😵
hi, what are your studio monitors?
Nice
Execelente! Puedes hacer un vídeo de hacer un buen intro pars Future bounce? O something like that 👻
Hey, Jay! Please do a breakdown of your remix of "Games" by Macky Gee.
From now on, I'm always gonna have mix on 69%
I love it. XD
best
Rayos espero que puedas grabar tutoriales en español :/, Si se inglés pero se me facilita mas leerlo que escucharlo y entenderlo al 100. Pero igual viendo que lo tienes tan fluido el inglés puedo intentar aprender las dos cosas, Inglés y producción :D
8:40 , you can actually get away with a cut to remove everything blow 20 Hz instead of 10 Hz as he did in this track , most sub woofers can't play these frequencies anyway.
this video is a really good master guide, one of the first people that doesn't start the video with: ''you need like 6000 dB headroom to start your master''
20 Hz is still useless in my opinion. 25 or even 30 atmost is also alright.
💕💕💕🔥🔥🔥🔥🔥
Pensé que era el único que hablaba español xd que veía al tío jay
Jay, leave the videos subtitled.
Why does your mixed song peak above +3db without the master? I though that was bad practice
It is unorthodox to master a track thats above 0 dB but Disclosure told there are no rules to making music so.... there goes that.
Its only a guideline to master a track beloe 0 dB. Its not a rule.
Nice vid bro, thanks!
And i have problem, hopefully you could help me. Since I make music from fl studio mobile, it is not the same to master, or at least isn't that easy. So I don't know if you have a y recommendation or something, I would really appreciate if you could answer me, if not, theres no problem. You are a crack anyway 🔥🔥🔥
*_Pon subtítulos en español crack_*
Man, why your videos so crisp lol
good, Hello with Ukraine and Poland
mix on 69%. There's no accident - Master Oogway-