I pick up my Aselkon MX6 last Saturday and returned Saturday after noon. Barrel covered in surface rust , OK clean and reblue . Reg gauge leaking not a O ring but gauge it self . And to top it all off magazines don't fit without extreme force. Hopefuly the next one is better
Sadly, most PCP airguns, though especially Chinese or Turkish, are projects because of poor manufacturing and design. Even if you spend a lot of money on a high end PCP you can get an over complicated piece of temperamental equipment with POI shifts and constant breakdowns etc requiring constant servicing. It is a big contrast to say a decent spring airgun or a .22 bolt action rimfire that simply work and don't have POI shifts.
It is looking smart so far , thats a great video ,, I dont own one of these and probably never will , but i enjoy watching you work from an engineering point of view.
@@sub12airgunnersHello, good day, congratulations, you have nice videos, I have a question for you, I would be glad if you could help me. .22 cal is prohibited in my country, I bought .177 cal cricket 2 tactical, I want 18-20 gr slug 900-950 fps 50-100 yard accuracy, do you think hammer is enough to increase fps?
Brilliant just what i need to get mine back together LOL its in bits on my work bench and just needed clarification on a few bits before putting it back together got to agree the mix of torex screws and hex screws can catch you out if you not paying attention thanks for clear and simple review
great video mate . will be interesting to see what you can do with it for sure . the one i shot had a very noisy action a real ping . what does drive me a bit nuts is the use torx screws and allen screws i get it but it’s a tad if a pain having to gab different bits . not a deal breaker. have to say tge wood looks very nice 👍
Well that sure is a complex little beast. That is quite a high regulator pressure for a 12 ft/lb rifle. Will be interesting to see what you do to tame the ping when firing, I think I am getting a permanent ringing in my ears from firing mine!
Nice video. Would there be any reason to use the combination of torx and allen bolts? Is there a benefit? Now I can look forward to the tweaks and rebuild.
Surprised me how many small components there are
yes mate a fair few 😀
Many short-comings
Always look forward to your vids, very detailed and easy to watch!
thank you 👍
Excellent vids! May I respectfully suggest using a lighter color work surface to contrast with the airgun on camera. Your instructions are stellar!
thanks for watching, we use a grey mat now to help with the contrast
A really enjoyable video look forward to seeing more 👍🏻
thank you 👍
I pick up my Aselkon MX6 last Saturday and returned Saturday after noon. Barrel covered in surface rust , OK clean and reblue . Reg gauge leaking not a O ring but gauge it self . And to top it all off magazines don't fit without extreme force. Hopefuly the next one is better
Sadly, most PCP airguns, though especially Chinese or Turkish, are projects because of poor manufacturing and design. Even if you spend a lot of money on a high end PCP you can get an over complicated piece of temperamental equipment with POI shifts and constant breakdowns etc requiring constant servicing. It is a big contrast to say a decent spring airgun or a .22 bolt action rimfire that simply work and don't have POI shifts.
i hope you have better luck with your next one 😀
Great video as usual jake 👍 don't think I've ever seen a rifle with so many bits to it . Great job 👏
yes this one has a few bits 😁
It is looking smart so far , thats a great video ,, I dont own one of these and probably never will , but i enjoy watching you work from an engineering point of view.
thank you 👍
Great video as always Jeff and Jake. You make it look so easy when it's clearly not lol
thank you 👍
As always absolutely first class video!
Hi quality very clearly explained and a massive help to any owner👏
Much appreciated!
Looks to me like Kalibrgun and AGT are sharing their design, cricket and uragan look almost indentical.
yes lots of similarities with these guns 😁
Fascinated to see what you can do to improve it chaps.
thank you 👍 we have a few ideas 😀
@@sub12airgunnersHello, good day, congratulations, you have nice videos, I have a question for you, I would be glad if you could help me. .22 cal is prohibited in my country, I bought .177 cal cricket 2 tactical, I want 18-20 gr slug 900-950 fps 50-100 yard accuracy, do you think hammer is enough to increase fps?
Great work as always Jeff, Cheers 👌👌👌👍👍👍👍👍👍👍👍
Thanks 👍
Brilliant just what i need to get mine back together LOL its in bits on my work bench and just needed clarification on a few bits before putting it back together got to agree the mix of torex screws and hex screws can catch you out if you not paying attention
thanks for clear and simple review
yes don't know why they do that mix to to it drives me nuts 😁
@@sub12airgunners gun all back together shooting sweet as a nut thanks for the review
great video mate . will be interesting to see what you can do with it for sure . the one i shot had a very noisy action a real ping . what does drive me a bit nuts is the use torx screws and allen screws i get it but it’s a tad if a pain having to gab different bits . not a deal breaker. have to say tge wood looks very nice 👍
that gets me to mate one or the other not both, you end up with a bench full of different drivers, it drives me nuts 😁
Awesome video thanks for sharing bsafe buddy 👍
thank you 👍
Well explained and informative video👍🏼
Glad you liked it!
Good vid Jeff, Hope you know how to put it back together 🤣🤣. Can’t wait for the next instalment 👍.
LOL, thanks for watching 😁
Well that sure is a complex little beast. That is quite a high regulator pressure for a 12 ft/lb rifle. Will be interesting to see what you do to tame the ping when firing, I think I am getting a permanent ringing in my ears from firing mine!
yes it is a bit of a ping and twang in the shot cycle and it gets worse when you drop the reg pressure 😣 but i am sure we can make it better 😀
nice 😀😀
Nice video. Would there be any reason to use the combination of torx and allen bolts? Is there a benefit? Now I can look forward to the tweaks and rebuild.
i can't see any benefit mate drives me nuts 😂
Another excellent strip down tutorial .... The back block certainly has a lot of little bits to it 🧐
yes lots of parts in this one 😁
Man I hope you will get your hands on Fainwerkbau 800X and tune it to perfection❤
really like the FWB stuff 😁
@@sub12airgunners I've converted my FWB 800X to 16j recently and it's a laser BR gun, but I had to add additional plenum to it..
Приветствую. Отличный аппарат. Всех благ.
thank you 👍
excellent go to video for my new cricket !! get a lighter coloured background 🤣
thanks for watching
Marcelo , qual
O slug ideal para essa carabina ? Quantos grains ?
That will depend on speed and the barrel and may be different on every gun
Cricjet tatical 600 mm barrel
Excellent video, fancy doing mine?
sorry we don't take on work for other people, but thanks for the vote of confidence 👍😀
What a mess
🤣
Why its new gun !! Was working !!
If you watch the previous videos they take a standard rifle and see what they can do to make it better.
yes as said just watch a couple of the other vids and you will see why 😀