Did it all to my P 228 west German one I have had for about37 yrs. S R kit , grips , trigger return spring & super strut ! Best thing ever for my small hands & arthritis !
Thanks for your great installment of the SIG Sauer P226 AND P229 - Armory Craft - Sig Armorer Superstrut. Fellow your steps and came out very happy what I done. Again Thanks you for your Great videos!!!
My Super Strut arrived Monday. 12 minutes after the mailman left it was installed. Tuesday morning was putting rounds down range. Smoother action, Lighter pull in DA. Im happy. Thanks for the video
I've installed the Superstrut on all my P Series Sig's. Installation was slightly more difficult on the SAO P226 Legion,but still well worth it. Thanks SigGuy!
I added a 17 pound red spring to my p226 dak and i stalled the shorter spring retainer as the stock SIG retainer is tHe longer one. The SuperStrut being wider in size, and when i add the red lighter spring on, comes in contact with the backside of my G10 Hogue grip. First pull of the trigger works fine, but does not reset as the spring gets bound up on G10 grip. This is documented in forums as an isue with Hogue grips for the PSeries, so im running the stock SIG strut with the lighter sear and strut spring for now.
Would this be good for a 229 legion my friend ? Love your channel I have a few sig handguns and have bought many extras recommned by you. Next will be your punch set for my 229 legion.
Installed mine but it makes my trigger click once after the hammer has fallen. Any ideas what could be wrong? I've taken it out and reinstalled it, happened everytime. Stock one doesn't do it.
Sig Guy, great videos by the way. I just pulled apart my new P226 Legion SAO and don't see the issue described. Spring does not bow like video shows, it actually stays pretty straight throughout its range of motion. My spring does stick only after its been under full tension. Once it comes off, by hand I cannot make it stick to the strut. I also noticed that the shape of the section that goes inside the spring is slight different than what the video shows, actually closer to the Super Struts' shape. The notch at the top of the Super Strut is not present on my stock strut, so that could still be an issue. But as far as the binding goes on the spring, looks like Sig did some changes.
Commenting on your comment in hopes we get a response. My MK25 also has the long shoe. I'd like to order the super strut and metal shoe when it's available if it works!
No idea. I don’t used GG products anymore nor will I ever again. The Sig Armorer was the first to designed and developed an aftermarket upgrade strut. It works as advertised flawlessly. I now use them in all my p-series pistols.
I'd assume that if I wanted to... I could remove my strut and file the side that the spring contacts, and make it a much more friendly surface. If I wanted to improve my hammer slop... I'd have to get one of these, but it seems really expensive for a little piece of flat, stamped steel. Honestly... if you have access to a laser or water jet... you could use your original to revise the design and make your own super strut. Wouldn't cost you squat. Of course... not everyone knows the owner of a machine shop ;-)
There are more improvements to it other than the sharp edges contacting the spring. Did you watch the complete video? As far as upgrades, gunsmithing or modifications to classic SIGs I think the cost of this upgrade is right were it belongs. Most people don’t understand what goes into research, development and production of aftermarket upgrades like these. All that isn’t free. Many people file down and polish their struts. That’s nothing new. This strut does much more than that.
@@SigGuyI recently made a purchase from them and the made a mistake on my order. I got the correct, part but with lots of attitude and rudeness. Not very professional at all
Ok after redoing the test when i pull my hammer down the slide lever moves once up and clearly visiable to the eye but after repeating the pull it only moves a tiny bit. I called sig customer service.and they told me they have never heard one person complain but assured me if my P226 broke it would be fixed undsr warrenty. So as much as i would do this modification i dont want to.void.my warrenty. Also by the time it causes real problems we are talking several thousand rounds
So don’t fix it until it’s broken? That’s not a real good answer in regards to firearms. It’s yours and you can do as you please. Not very hard to reinstall the factory strut if you ever needed to send it in to SIG. That safety will get looser and the cross bolts are know to break. SIG doesn’t admit much is ever wrong. They still haven’t admitted to the sticker problem in the original 365 nor the drop problem in the 320. Yet there is the VOLUNTARY 320 upgrade but no recalls for both dangerous issues. A SIG CS rep is the last person I would ask. Message The Sig Armorer or Gray Guns and see what they think. I already know the answer.
@@SigGuy I agree with you but my grip is a one piece grip and heard it is a real pain to take off unless you have that special tool. I regret buying this gun maybe I will just take it to Cabalas and sell it to them. I do know if the safety does rattle Sig will fix it. They have taken care of me before and sure they will do the same again.
Armory Craft makes 13 different Sig triggers. Check out the website. Make sure you read the descriptions. I’m sure there is one there for yours. Sigguy.Com
I just took the grips off my made in Newington P220 and no spring of n e king is touching or hiting the strut where that notch is, everything seems very nicely fit and the strut spring is not binding either, the spring is curved a little but not touching either side of the strut so neither of the problems you describe here are taking place. There isnt n e thing even close to touching the strut 2 cause a problem on my gun, maybe i got a good one or something or they have fixed n e problems with this new P220.
@@jackomalley3687 ok, i couldnt see anything rubing, i even cocked the hammer exremly slow 2 c if i could feel n e thing that i couldnt see. Maybe you can make a video showing a stock one hiting where that cut out is. I do like that the new strut holds the spring nice and straight, that def cant hurt.
@@nobodysreview6137 with the pistol fully assembled, pull the hammer all the way back until it hits the rebound aggressively and firmly. Then look at the safety lever to see if it moves a bit. The 220 is not affected and no need to do the mod
@@nobodysreview6137 I just to give you an update it seems to affect the Sao model more than any other is but like you have noticed I have not seen any issues with the stock strut causing problems so I think in this case Sig often makes changes on the Fly about notifying the public
My Sig P226 SAO Legion was built in 2020. Mine has no grit is it possible Sig corrected this at the factory? If i don't do this mod and my trigger safety fails how can sig allow this to fester? This should be a recall issue
Racer X It’s no different than the strikers failing in the 365. They knew it was a problem yet they didn’t recall it because it was not a big enough problem to them.
@@SigGuy i just tried.the same thing. With pistol fully assembled and hammer cocked back i pulled the hammer all the way down no movement of safety lever. I also have no gritty feel to my trigger. Build date was 2020 so maybe sig correxted this issue dont know
You can install any spring that you want. Just make sure that you train and ensure that it’s going to be 100% reliable. I use lighter weight springs in mine personally. You can do whatever you want as long as you’re confident that it’s going to work flawlessly each and every single time.
You should do a video on how to get the most trigger pull reduction on the P series or P220. I just picked up my P220, I want to get as much trigger pull reduction as possible while still keeping it safe. You have any videos on breaking in the slide release lever? This is first P series pistol and I'm excited to make as many upgrades as possible, but nothing flamboyant like those Agency guys on the glock side.
Do not use these for the p226 X-five series of pistols! This strut works excellent for p226 DA/SA or p229 DA/SA. I tried this product on my p226 X-five and experienced light primer strikes with all springs provided in the kit. Yesterday I shot my X-five with the factory hammer spring and the problem still persist. The hammer strut on the X-five is completely different than a regular p226.
My 226 X5 SuperMatch is the only SIG I own that needs NO upgrades. As much as you pay for them you better believe they can’t be made any better! Absolutely correct though. The superStrut is amazing in all classic series SIGs. Master Shop SIGs don’t need any upgrades.
@@SigGuy Very true! The p226 X-five needs little to no upgrade however its just fun to upgrade them. I have a p226 x-five competition gen 1 and a p226 x-five classic gen 2. The Gen 2 has a armory craft hammer, purple sear spring and a red hammer spring. The trigger weight is probably under a pound! However I have not test fired the gen2 for reliability yet.
Curtis Rudisail ahhhh. Yes. The pin that the factory strut contacts. Yes it can fail. There have been instances of it breaking. I’m not sure how Sig deals with that issue. I’m not sure if they even recognize it is an issue. If you have the manual safety pull the hammer back all the way with your finger and you should be able to see the safety moving. If it’s moving that’s because the strut is contacting it. This new one is re-designed to illuminate that problem.
Ordered about a week ago, looking forward to getting it !! I been loading for it & a couple other 9's I have not shot. Health problems for me & her for the past yr. Also it has been toooo Hot for us old folks. I bought my P228 when the Mil. first started getting them. I think the issue ones were maid in USA but mine is west Germany. Sounds like very good redesigned strut ! Maybe today ! And all are SIG P228, P320 & 1911 Tac ops.
1,000,000% disagree. I don't know you but based on this comment I'd say you are new to this type of upgrade/product. Please elaborate on your findings and experience. Thank you.
![Lp. Последняя Реальность #107 РОДНОЙ ДОМ [Финал] • Майнкрафт](http://i.ytimg.com/vi/IK3QKzKUlHM/mqdefault.jpg)
Did it all to my P 228 west German one I have had for about37 yrs. S R kit , grips , trigger return spring & super strut ! Best thing ever for my small hands & arthritis !
Thanks for all the detailed videos! Gave me confidence to dissemble & resemble my Sigs.
Thanks for your great installment of the SIG Sauer P226 AND P229 - Armory Craft - Sig Armorer Superstrut. Fellow your steps and came out very happy what I done. Again Thanks you for your Great videos!!!
New to your channel. I couldn't subscribe fast enough. Outstanding information. Thank you!
Glad there will be a kit for the 2022.
My Super Strut arrived Monday. 12 minutes after the mailman left it was installed. Tuesday morning was putting rounds down range. Smoother action, Lighter pull in DA. Im happy. Thanks for the video
Ricky F you don’t mess around! Lol. Good follow up! That’s awesome. Thank you.
Where did you get it & how much ???
@@Hurricanepistol thesigarmorer.com 60.00. The support shoe is another 5 bucks.
I've installed the Superstrut on all my P Series Sig's. Installation was slightly more difficult on the SAO P226 Legion,but still well worth it. Thanks SigGuy!
how so? I'm getting the upgrade bug after getting my first Legion SAO
Any tips on the installation for the 226 legion sao would be appreciated
I added a 17 pound red spring to my p226 dak and i stalled the shorter spring retainer as the stock SIG retainer is tHe longer one. The SuperStrut being wider in size, and when i add the red lighter spring on, comes in contact with the backside of my G10 Hogue grip. First pull of the trigger works fine, but does not reset as the spring gets bound up on G10 grip. This is documented in forums as an isue with Hogue grips for the PSeries, so im running the stock SIG strut with the lighter sear and strut spring for now.
Very good product. Installed on my Sig 229 ELITE. VERY NOTICEABLE UPGRADE. INSTALLATION IS A Breeze:-)
i have the 229 pro what did you notice. cause the pro shoots nice
Awesome!
Your sig is beautiful love that camo finish. Do you mind if I ask where you got it done at? Is it cerakote?
Thank you very much for the compliment. That one was done by The Sig Armorer. Yes it’s cerakote.
Would this be good for a 229 legion my friend ? Love your channel I have a few sig handguns and have bought many extras recommned by you. Next will be your punch set for my 229 legion.
Absolutely! Greet improvement for all 226/8/9s
awesome thank you
i have installed the super strut.....best upgrade ever....doent understand why this is not a standard from Sig Sauer
Right!
I really like the multicam you have on the 228, would mind telling me what colors were used?
bill ennis that was done by The Sig Armorers cerakote guy. You would need to contact him for specifics. Pretty sweet eh?! 🤙🏼
@@SigGuy thank you sir
Installed mine but it makes my trigger click once after the hammer has fallen. Any ideas what could be wrong? I've taken it out and reinstalled it, happened everytime.
Stock one doesn't do it.
Makes sense
Sig Guy, great videos by the way. I just pulled apart my new P226 Legion SAO and don't see the issue described. Spring does not bow like video shows, it actually stays pretty straight throughout its range of motion. My spring does stick only after its been under full tension. Once it comes off, by hand I cannot make it stick to the strut. I also noticed that the shape of the section that goes inside the spring is slight different than what the video shows, actually closer to the Super Struts' shape. The notch at the top of the Super Strut is not present on my stock strut, so that could still be an issue. But as far as the binding goes on the spring, looks like Sig did some changes.
My 226 has the longer shoe and short strut, what would be the pro’s and cons to changing to the short shoe and long strut?
Commenting on your comment in hopes we get a response. My MK25 also has the long shoe. I'd like to order the super strut and metal shoe when it's available if it works!
How does the Superstrut compare to the Grayguns SIG P-Series Fat Custom Strut System?
No idea. I don’t used GG products anymore nor will I ever again. The Sig Armorer was the first to designed and developed an aftermarket upgrade strut. It works as advertised flawlessly. I now use them in all my p-series pistols.
I'd assume that if I wanted to... I could remove my strut and file the side that the spring contacts, and make it a much more friendly surface. If I wanted to improve my hammer slop... I'd have to get one of these, but it seems really expensive for a little piece of flat, stamped steel. Honestly... if you have access to a laser or water jet... you could use your original to revise the design and make your own super strut. Wouldn't cost you squat. Of course... not everyone knows the owner of a machine shop ;-)
There are more improvements to it other than the sharp edges contacting the spring. Did you watch the complete video? As far as upgrades, gunsmithing or modifications to classic SIGs I think the cost of this upgrade is right were it belongs. Most people don’t understand what goes into research, development and production of aftermarket upgrades like these. All that isn’t free. Many people file down and polish their struts. That’s nothing new. This strut does much more than that.
@@SigGuy... Thanks for the feedback! Yes... manufacturing a product does involve some significant investment. No doubt.
Does this work on the p220?
Looks like I need this kit. I did the test on my Legion SAO and the safeties move.
Definitely if take safety moves. Here’s the link if you are interested.
www.sigguy.com/the-sig-armorer-products
@@SigGuy Thank you. Ordering now.
Do you know what the mainspring weight is on the P220 legion SAO? Should I put the new included mainspring in??
I believe it's #21 vs #20 in this kit.
Will this work on a dak pistol.
So Sig had decades to change the spring but kept the old one ?
Have you tried the GrayGuns strut? A comparison video would be great.
hksigman I refuse to give them another penny of mine. Besides I already know which strut performs better. 😊
Sig Sauer Guy , wow!! Sounds like you’re not a GG fan. Neither am I honestly.
hksigman the manner in which a company conducts business says a lot about them.
Is there another company that sales something similar to their ELS system?
@@SigGuyI recently made a purchase from them and the made a mistake on my order. I got the correct, part but with lots of attitude and rudeness. Not very professional at all
Ok after redoing the test when i pull my hammer down the slide lever moves once up and clearly visiable to the eye but after repeating the pull it only moves a tiny bit. I called sig customer service.and they told me they have never heard one person complain but assured me if my P226 broke it would be fixed undsr warrenty. So as much as i would do this modification i dont want to.void.my warrenty. Also by the time it causes real problems we are talking several thousand rounds
So don’t fix it until it’s broken? That’s not a real good answer in regards to firearms. It’s yours and you can do as you please. Not very hard to reinstall the factory strut if you ever needed to send it in to SIG. That safety will get looser and the cross bolts are know to break. SIG doesn’t admit much is ever wrong. They still haven’t admitted to the sticker problem in the original 365 nor the drop problem in the 320. Yet there is the VOLUNTARY 320
upgrade but no recalls for both dangerous issues. A SIG CS rep is the last person I would ask. Message The Sig Armorer or Gray Guns and see what they think. I already know the answer.
@@SigGuy I agree with you but my grip is a one piece grip and heard it is a real pain to take off unless you have that special tool. I regret buying this gun maybe I will just take it to Cabalas and sell it to them. I do know if the safety does rattle Sig will fix it. They have taken care of me before and sure they will do the same again.
@@SigGuy and one more question, as the gun gets cocked every time you fire it does not go all the way back and hits the rebound stop or does it?
Called Sig to order it & he knew nothing about it ! Where do I buy it ??
The Sig Armory Robert Burke is the one who makes those. Here is the link
www.thesigarmorer.com/product-category/superstrut-components/
Will a regular armory craft trigger fit or you got a german frame
Armory Craft makes 13 different Sig triggers. Check out the website. Make sure you read the descriptions. I’m sure there is one there for yours. Sigguy.Com
There all out of stock
I just took the grips off my made in Newington P220 and no spring of n e king is touching or hiting the strut where that notch is, everything seems very nicely fit and the strut spring is not binding either, the spring is curved a little but not touching either side of the strut so neither of the problems you describe here are taking place. There isnt n e thing even close to touching the strut 2 cause a problem on my gun, maybe i got a good one or something or they have fixed n e problems with this new P220.
The P220 is not as effected as the P226 and P229
@@jackomalley3687 ok, i couldnt see anything rubing, i even cocked the hammer exremly slow 2 c if i could feel n e thing that i couldnt see. Maybe you can make a video showing a stock one hiting where that cut out is. I do like that the new strut holds the spring nice and straight, that def cant hurt.
@@nobodysreview6137 with the pistol fully assembled, pull the hammer all the way back until it hits the rebound aggressively and firmly. Then look at the safety lever to see if it moves a bit. The 220 is not affected and no need to do the mod
@@jackomalley3687 ok
@@nobodysreview6137 I just to give you an update it seems to affect the Sao model more than any other is but like you have noticed I have not seen any issues with the stock strut causing problems so I think in this case Sig often makes changes on the Fly about notifying the public
My Sig P226 SAO Legion was built in 2020. Mine has no grit is it possible Sig corrected this at the factory? If i don't do this mod and my trigger safety fails how can sig allow this to fester? This should be a recall issue
Racer X It’s no different than the strikers failing in the 365. They knew it was a problem yet they didn’t recall it because it was not a big enough problem to them.
@@SigGuy i just tried.the same thing. With pistol fully assembled and hammer cocked back i pulled the hammer all the way down no movement of safety lever. I also have no gritty feel to my trigger. Build date was 2020 so maybe sig correxted this issue dont know
@@SigGuy I have to make a correction when I do pull the lever back as far as it will go the safety lever does move a little but not extrme
Racer X interference. SA strut fixes that. Totally worth fixing.
@@SigGuy thanks
Is there a shorter version offered for the P224?
You would have to contact Robert Burke the SIG Armorer for that question.
Would it we wise to also install a 18 lbs spring while I’m at it or would you advise against that?
You can install any spring that you want. Just make sure that you train and ensure that it’s going to be 100% reliable. I use lighter weight springs in mine personally. You can do whatever you want as long as you’re confident that it’s going to work flawlessly each and every single time.
@@SigGuy I just got the master spring kit and slightly curved trigger order in. Thank you.
@@TransformersHoarder already packaged and headed to you first thing in the morning bud. Thank you for your support 🙏🏼
I read they don’t recommend anything less than #19
@@usamade5943 Who doesn’t?
You should do a video on how to get the most trigger pull reduction on the P series or P220. I just picked up my P220, I want to get as much trigger pull reduction as possible while still keeping it safe. You have any videos on breaking in the slide release lever? This is first P series pistol and I'm excited to make as many upgrades as possible, but nothing flamboyant like those Agency guys on the glock side.
Do not use these for the p226 X-five series of pistols! This strut works excellent for p226 DA/SA or p229 DA/SA. I tried this product on my p226 X-five and experienced light primer strikes with all springs provided in the kit. Yesterday I shot my X-five with the factory hammer spring and the problem still persist. The hammer strut on the X-five is completely different than a regular p226.
My 226 X5 SuperMatch is the only SIG I own that needs NO upgrades. As much as you pay for them you better believe they can’t be made any better! Absolutely correct though. The superStrut is amazing in all classic series SIGs. Master Shop SIGs don’t need any upgrades.
@@SigGuy Very true! The p226 X-five needs little to no upgrade however its just fun to upgrade them. I have a p226 x-five competition gen 1 and a p226 x-five classic gen 2. The Gen 2 has a armory craft hammer, purple sear spring and a red hammer spring. The trigger weight is probably under a pound! However I have not test fired the gen2 for reliability yet.
If what you are saying is true. Why not a recall if they will fail.
Who said anything about failing? The superstrut is an upgrade for the factory strut. Improves the performance.
Sig Guy I understood you to say the safety could fail.
Curtis Rudisail ahhhh. Yes. The pin that the factory strut contacts. Yes it can fail. There have been instances of it breaking. I’m not sure how Sig deals with that issue. I’m not sure if they even recognize it is an issue. If you have the manual safety pull the hammer back all the way with your finger and you should be able to see the safety moving. If it’s moving that’s because the strut is contacting it. This new one is re-designed to illuminate that problem.
Sig Guy Thanks
How much & where ?
Ordered about a week ago, looking forward to getting it !! I been loading for it & a couple other 9's I have not shot. Health problems for me & her for the past yr. Also it has been toooo Hot for us old folks. I bought my P228 when the Mil. first started getting them. I think the issue ones were maid in USA but mine is west Germany. Sounds like very good redesigned strut ! Maybe today ! And all are SIG P228, P320 & 1911 Tac ops.
Son Baird nobody cares dipshit
you are going to cost me my money sooner or later
That’s the goal!!! 😊
Waste of money! It will not make a bit of difference and the people that make them are terrible to deal with!
1,000,000% disagree. I don't know you but based on this comment I'd say you are new to this type of upgrade/product. Please elaborate on your findings and experience. Thank you.
lucky to live close to Sig NH 🏠🏔️♥️