Cardboard Iron Man Helmet That OPENS! DIY No Electronics
Вставка
- Опубліковано 27 вер 2024
- Install Raid for Free ✅ IOS/ANDROID/PC: clcr.me/SeansC... and get a special starter pack 💥 Available only for the next 30 days
Support me on Patreon here: / seanscrafts
Iron Man helmet template by DaliLomo DIY: dali-lomo.blog...
How to print the template:
1. Download Adobe Acrobat Reader here (for free): acrobat.adobe....
2. Right click on the template, then click "Open With" and "Adobe Acrobat Reader DC"
3. Click the printer icon at the top left
4. Under "Page Sizing & Handling", click "Poster", then change the "Overlap" to "0 in"
5. Set the "Tile Scale" to 100% or larger or smaller depending on your head size. DaliLomo DIY has a blog post about how to resize his template to accommodate your head size which you can find here: dali-lomo.blog...
6. Click "Page Setup..." and specify what type of paper you are using (US Letter for example) before printing
Materials:
paperboard (AKA cereal box cardboard)
Dupli-Color Perfect Match Inferno Red spray paint: amzn.to/3rZwBrE
Dupli-Color Perfect Match Sunburst Gold spray paint: amzn.to/3twojb8
Dupli-Color Perfect Match filler primer: amzn.to/3qSVl3v
corrugated cardboard: amzn.to/2NBAP6i
binder board: amzn.to/3sfwQ1h
8x5mm neodymium magnets: amzn.to/34hvfhV
super glue: amzn.to/2xSssPq
hot glue gun: amzn.to/3kjUx5F
resin: amzn.to/2NOAaBy
floor mat foam: amzn.to/2NkoNSl
sponge: amzn.to/3aFVjH4
metal wire coat hanger: amzn.to/2MbubX8
white perforated vinyl: amzn.to/2TAEqUU
bamboo skewer: amzn.to/2A6CzAL
rubber bands: amzn.to/3mmWI8f
sandpaper: amzn.to/3pEAOPh
wood filler: amzn.to/35GU5rz
craft foam: amzn.to/30PFdGw
craft knife: amzn.to/3fzVcO0
replacement knife blades: amzn.to/3eUIgBw
cutting mat: amzn.to/2ZxGqjo
Film equipment I'm currently using:
cameras: amzn.to/2SiHLI2
amzn.to/2UQVwij
lenses: amzn.to/3fa4ccv
amzn.to/2Wcwzhq
amzn.to/3ic0504
amzn.to/2Yklo90
microphone: amzn.to/3et9YFn
tripods: amzn.to/2qYbk6Y
amzn.to/2HMRmou
amzn.to/3FWOHBy
lighting: amzn.to/2ETC2Ve
Music:
Blues or Something like That - Tigerblood: www.epidemicso...
Don't Wanna Be Dead Anymore (Instrumental Version) - Coma Svensson: www.epidemicso...
In My Time - Shiver Disk: www.epidemicso...
Holding on to Suspense - The Grateful 7: www.epidemicso...
Someone I'll Never Be - The Grateful 7: www.epidemicso...
Out and About - Harper Rey: www.epidemicso...
Just Say When - The Grateful 7: www.epidemicso...
DISCLAIMER:
This description contains affiliate links, meaning if you purchase something using those links, I will receive a small commission. The links do not cost you anything extra at all, but clicking on them to buy something helps out the channel!
Install Raid for Free ✅ IOS/ANDROID/PC: clcr.me/SeansCrafts and get a special starter pack 💥 Available only for the next 30 days
Support me on Patreon here: www.patreon.com/seanscrafts
Iron Man helmet templates by DaliLomo DIY: dali-lomo.blogspot.com/2019/09/iron-man-mk4-retractable-back-piece-for.html
How to print the template:
1. Download Adobe Acrobat Reader here (for free): acrobat.adobe.com/us/en/acrobat/pdf-reader.html
2. Right click on the template, then click "Open With" and "Adobe Acrobat Reader DC"
3. Click the printer icon at the top left
4. Under "Page Sizing & Handling", click "Poster", then change the "Overlap" to "0 in"
5. Set the "Tile Scale" to 100% or larger or smaller depending on your head size. DaliLomo DIY has a blog post about how to resize his template to accommodate your head size which you can find here: dali-lomo.blogspot.com/p/head-measurements.html
6. Click "Page Setup..." and specify what type of paper you are using (US Letter for example) before printing
Materials:
paperboard (AKA cereal box cardboard)
Dupli-Color Perfect Match Inferno Red spray paint: amzn.to/3rZwBrE
Dupli-Color Perfect Match Sunburst Gold spray paint: amzn.to/3twojb8
Dupli-Color Perfect Match Scratch filler primer: amzn.to/3qSVl3v
corrugated cardboard: amzn.to/2NBAP6i
binder board: amzn.to/2O6IwFm
8x5mm neodymium magnets: amzn.to/34hvfhV
super glue: amzn.to/2xSssPq
hot glue gun: amzn.to/3kjUx5F
resin: amzn.to/2NOAaBy
floor mat foam: amzn.to/2NkoNSl
sponge: amzn.to/3aFVjH4
metal wire coat hanger: amzn.to/2MbubX8
white perforated vinyl: amzn.to/2TAEqUU
bamboo skewer: amzn.to/2A6CzAL
rubber bands: amzn.to/3mmWI8f
sandpaper: amzn.to/3pEAOPh
wood filler: amzn.to/35GU5rz
craft foam: amzn.to/30PFdGw
craft knife: amzn.to/3fzVcO0
replacement knife blades: amzn.to/3eUIgBw
cutting mat: amzn.to/2ZxGqjo
DISCLAIMER:
This comment contains affiliate links, meaning if you purchase something using those links, I will receive a small commission. The links do not cost you anything extra at all, but clicking on them to buy something helps out the channel!
Second
Please make a benten's watch
can you please do a cardboard beyblade?
Yeay i love your craft i love it
Make a scarlett web shooter
THIS IS THE BEST DIY IRONMAN HELMET TUTORIAL ON UA-cam! 💯🔥🤘💙
P.S. loved the acting at 18:55
Hey yowawerts i am your regula viwer
@@kamalhossain4731 Hi 😊 Nice to see you here!
@@ImYowawerts hi there im your regualar commenter and Og viewer
AHHH HI YOWAWERTS! You know your style and Sean's style of making things are pretty similar using cardboard and all that stuff!!!
Dude, this is incredible. I absolutely love how you use simple mechanisms instead of the fancy electronics that most people, including myself, can never understand. All I can say is thank you for this amazing content.
Now I want to make a DIY
Hehe
Facts. Recently found his channel. And I’m seriously considering doing everything he’s made. All with time ofc. But this iron man helmet and the web shooters and caps shield are definitely a must.
So true, amazing what hes doing, because of him i atemted making masks on my own, u like my black panther 2 mask? :)
Bro how to close this helmet 😊
From Sean's Crafts to Sean's Industries real quick
@MrCool_KID AND GANG bot
ua-cam.com/channels/cs0xQQc7AS5HnkmAKQbzfQ.html
Subs this guy instead lol
He tried harder and he started 5 year ago and only have 37 as his subscribers
@MrCool_KID AND GANG Bot
@MrCool_KID AND GANG i subbed, just keep at it and I'm sure you'll get 1k. Good luck dude
@MrCool_KID AND GANG np and ty for subbing
They way you introduced the sponsor actually made me listen instead of “NoW IntO tOdaYS SponSOR” thank you for that😊
Man, in a year I won't be suprised if he makes a fully functioning cardboard Iron Man suit! Great video :)
Yes
Yup
Yep
Bet
Yeup
Wow, didn’t expect to see myself when I clicked on this haha. Great work man!
yea lol
Yeah mega lol
l
Wdym?
Hi! I recommend you to watch tis video about DIY iron man head!
m.ua-cam.com/video/2kjAU17Q0K0/v-deo.html
I have seen many diy iron man helmets in UA-cam but this is the best.
Love that you use cardboard and other thing a lot of people would already own. It reminds me of when I was a kid and used to make everything out of card board but at some point through adulthood you feel like you need to upgrade your materials in order to make quality things. That’s definitely not necessary weather its card board or 3d printed they both will take a lot of time but look great!
Gorgeous Helmet design!
Ok
Ok
@@ロロノアゾロ-c4d ok
Ok
@@zaidiatoranimation3947 ok
I love your videos because you make things accessible for the average person, that don’t have access to servos and motors
Sean: exists
Superglue:your NOTHING without me!
Cardboard: if he's nothing without superglue then he shouldn't have superglue
Sean: what?
Cardboard: I'm taking the superglue away
@@dominictoretto8859 nice reference. XD
Hot glue: damn bro you gotta do me dirty..
MCU: amateurs
UA-cam: Sean wouldn't be known without me even you super glue and cardboard you both wouldn't be Sean's best friend without me!!!.
Really. This is the Best craft video of Iron Man Helmet that I ever seen on Internet. Easy build and easy open mechanism. Congratulations!!
First : Spider-Man Web Shooters And Helmet
NOW : Iron Man Helmet That Open
Next : Thor Mjölnir That You Throw And Come Back 😁👍
He could make that
Using similar mechanics to spiderman retractable Web shooter
@@bladeoftheruinedking2543 if he make the muilneer super light
@@yuvalmaharshak5566 or he could make the strings tensile strength stronger
@@bladeoftheruinedking2543 or he could make the hammer head hollow and light only to be filled with a drone and the attach the handle for some balance and then bring it back to him by controlling it with the remote control.
You are the only "crafts" person on youtube that is not corny and your stuff that you make is cool an durable 👌
make 2099 web shooter
check my channel bro , u did not see people that doesnt mean people dont exist
True
Love how the bottom goes down,nice little touch
If u were ever to remake this, I would recommend painting the pieces first before adding the mechanism to minimize the amount of masking tape
Sean: makes craft
Subscriber: makes people feel to see the video of Sean
yeah yeah
The slight flex of using AirPod boxes for the ears is amazing
@MrCool_KID AND GANG bot
16:52 Wow! this looks like it's 3d printed! Great job!
Who is wachinv in 2024
Me
🙋♂️🙋♂️🙋♂️
Me
Nahh it's who making in 2024
@@XDxdbite yeah
“Hey whats up Sean here and this…. is my Iron Man helmet that i built in a cave with a box of scraps”
Hahaha
Thank you for taking the time to post this. some people dont really know how hard it is to record and build.
This guy never stops doing awesome things who’s with me like
@RAMSAI stop begging for subs man 😂
When I grow up I want to be the real iron man and when I grow I also want to be like you
💀
Bro your a genius bro can you make a spider man homecoming spider drone pls bro 🥺
Hard but not imposible
Me and my sister are very impressed with how it looks like metal. Keep up the good work sean.
I feel like this is really awesome because you make these things easy for other people and use materials that are easy to find.
my guy has a big brain and the biggest imagination. i love your videos
keep it up
You are really a Tony Stark Sean. Great keep it up. Your talent can take you far
I think it would be awesome to get a tutorial of your own style of wolverine claws, maybe even retractable.
It looks so cool and the fact that it's cardboard makes it even cooler 😎
Yeah now we can make one for ourself way easier
This is my favourite sean’s crafts video
Make a Thor’s hammer that comes back when you throw it
Edit: everyone is replying saying you can't, I have a reply on this that tells you exactly how to do it.
YESSSS SUCH A GOOD IDEA
Boomerang with Thor style?
😂
@Justin Delos Santos may be nothing is impossible
impossible you would need a massive 100 pound magnet i would not carry that around
For anyone wanting to make this for their kid, I've been trying to get the right size for my 5 year old. Tried printing at 80% and it was too small. Couldn't even put it on my 1 year old daughter's head! 😄 I then tried printing at 90% and it seemed to be ok size for my son's head but he couldn't get the helmet on because the opening is too small. I tried removing quite a bit in the back but it didn't help. So I ended up just printing it at 100%. I can get the helmet on my head if I push my ears in when I put it on. So it'll fit my son's head. If anyone is making this helmet for a younger child, I'd try with something between 95% and 100%. 🙂
Yes, I printed it at 100% and the helmet it is ok for my children (5 and 8 years old)! I tried to put it on me but it's too tight (the chin can't get into the helmet)...
This is a better tutorial than all the others I’ve seen before. This is such a great build. Nice job Sean!!😀
Yeah but the iron man helmet
itself looks asian. 😅
Im saying that this helmet looks inaccurate!
My little brother loves this❤
the best tutorial for iron man helmet ,, salute to you sean!
I have been searching for a long time on how to make a Helmet without electronics, and this is perfect. Thank you Sean! Been a fan for a long time :D
Tony stark : you need an upgrade 😂😂😂😂😂😂😂
it is the best iron man helmet
@@josephda670 No iam saying about Tony stark Dialoge in civil war with spider man 😀😀😀😀😀😀😂😂😂😂
Every like I will do a push-up
Wow, I have been trying to do this for ages but this is the simplest one I have found. Love all your work dude, keep it up!
Sean's craft the next hacksmith..
@MrCool_KID AND GANG yo shut up stop askin for subs
I'm currently making ur iron man helmet and I am just gonna finish the mechanical part and hv made some of my own modifications which can even make this helmet better than what u showed But still ur iron man helmet is the best iron man helmet on UA-cam
This man could probably make a fully working iron man suit with ease if he wanted to
He is an absolute genius......he deserves all the subs in the world!
"You're an Avengers, Sean."
*"I'm a What?"*
"your an Avengers"
And a thumpin good one
Today I understand that everything might look simple but in reality it can be difficult too Thanks Sean I hv made it and subbed too
I love how it’s so simple to make but so awesome and badass at the same time and looks just like the real movie, flawless job dude, Keep it Up💯🔥🔥🔥🔥
The faceplate actually looks similar to his face especially the eyes 😂
Definitely not movie accurate!
This is amazing, I was about to dive into the fancy electronics to make my iron man mask open but then I found this, I'm gonna incorporate your mechanism into my 3D printed helmet :D
this also makes me want to get back into templates and EVA foam work ahh
The reenactment scene was absolute gold. Not only do you make really great things you make it really enjoyable.
Hi! I recommend you to watch tis video about DIY iron man head!
m.ua-cam.com/video/2kjAU17Q0K0/v-deo.html
Simple yet so awesome, if I could I'd totally make this! :3 For a future video maybe you should make a Captain America shield that would expand using a similar mechanism like the helmet's, or maybe an Iron Man glove that shoots. Anyways keep up the great work Sean, you've already inspired so many people :)
He has all that
I actually made this at home and it worked like magic thank you Sean for making my life so easier😉😉
Noice
@@YourLocalTwistedPlayer what does that actually mean😅
@@arpitarakshit3199 it is meme saying for mmmmnp nice
Wow
Is it good now
GUYS!!! if u want the helmet to fit PERFECTLY, DON'T set the tile scale to 100. to measure the tile scale, take the diameter of ur head in milimeters, divide that by 160 and multiply that by 100. THAT is what your tile scale setting should be. Sean told this in one of his spiderman mask videos and hope that this comment helped a few people at least
Is there anyway to do this if you don't have Adobe acrobat?
@@Sager_Gamer not really. Adobe Acrobat is there so that you can split the print across multiple pages and have it fit to your head. If you print it on one page, its gonna be smaller since it has to be cramped up into one spot and it wont really fit.
@@Sager_Gamer there is, i was able to do it with foxit reader but because my head is just insanely big i had to modify some of the templates and make them wider
This is the best iron man helmet video I have seen. This helped me with the templates to be in the perfect size.
Go watch hacksmith industries channel,you will be susprised
Me and my dad love marvel and DIY it’s incredible doing them both combined with eachother!
That's amazing! I still can't believe the whole thing is made out of cardboard! Super awesome, love your vids man, keep it up!
18:56 If Marvel A Movie With 10 Dollars 😂👍 ( But Seriously Nice Work On Iron Man And Spider-Man Helmets )
This video is ultimate. This DIY won't have been easier.
Sean crafts in 2033 be like: I made a working mark 85 suit from cardboard!
0:56 this dialogue was awesome
we need avangers bgm too
i think the eyes could be better instead of the same thing used for a spiderman mask, something tinted light blue would have been better
Hi! I recommend you to watch tis video about DIY iron man head!
m.ua-cam.com/video/2kjAU17Q0K0/v-deo.html
Request to make an Omniverse omnitrix that works exactly like it is shown in series (that alien interface ring function one where it pops up and gets back inside)
The og watch the black and white one only please
I like the omnitrix from Ben 10 omniverse
peaople have alredy made that including myself
@@andrexdfun262 u want to become alien??
For a cardboard build that looks INCREDIBLE!!
Fantastic work 👍
Can you make a lightsaber that extends and retracts out of the hilt?
Amazing as always Sean really awesome keep up the amazing work and dedication you put into it 💯
H
I
This is fantastic dude !! Can you plz also make the whole suite 🙏
This is exactly what I need right now, thank you. My 7-year-old son gave me the impossible project request, an ironman helmet made of cardboard, but opens up... like how??? so THANK YOU!
"You've got mad skills!"
Yea
ua-cam.com/video/U9GGe3RvO3Q/v-deo.html
Bro checkout my channel
@@maximizedindustry4626 Nice work with Captain America's shield! I'm also working on one, I just have to finish some painting and it will be done! ;)
make iron man's arc reactor that glows and can control your helmet with a command....
That may require electronics!
It looks 3D printed so cool
you should take the bar with the magnet on the jaw and put it on the faceplate, so its less noticeable when it opens.
Sean, I love your UA-cam channel a lot. I found all your craft projects very neat! ❤👏🏻😀
Just started watching you yesterday & I’m already in love with your creations. Well done, Sean ❤️
Yes not that easy but it's cheap
You’d know he’s a craft channel by just lookin at his fingers.
he got dem craft channel fingers
15:39 Ahhh yes, the fresh smell of magents and metal. I love it!
Haha yea, I used magnets on my black panthet 2 mask too, u like it as well?
16:52 Omg 🤯😲 It Looks like a 3d printed and also it looks likes metal
That’s not English
you should make the thor's hammer that retracts with the same thing in your last video
You should make iron man wrist watch glove
Please makes Thor's hammer that comes back
ez just put thor helmet + spiderman retractable we shooter and ez
I looked at the finished helmet and said. How expensive was all of that metal?
That end scene EPIC! You’re a craftsman more worthy than you give yourself credit for ,you are very talented .
This channel like the best way to do it at home budget wise n still look amazing sadly I still wouldn’t do any of it since I ain’t got patience but sure am loving watching this channel now it’s satisfying to watch!
i've seen this video like ten times and i'm still thinking "OMG how the heck did he do that"
Hey whats up sean here and this is my fully working spaceship I built mostly using just some cardboard,popsicle sticks, and rubber bands.
MY DADS GONNA FLIP WHEN I COME DOWNSTAIRS WITH THIS LMAO
LoL yeah
You have dads?
@@lome383 ? What do you mean? They didn’t say dads as plural they said dads like dad is
@@charliee963 I was joking
@@lome383 you thought your dad was joking when he said he was leaving
Make a watch web shooter which is my custom one so it looks like an ordinary watch but it’s a web shooter
Kinda like tasm web shooter but only different it’s a watch
Also I like your content
M
“Throw a little bit of Hot-Rod Red in there will ya Jarvis?”
“Yes, that should keep you low-profile”
*"Alright everybody stay down"*
Just made one for my son. Works awesome. He loves it!!!…the other kids in his kindergarten class want one too. So I sent this video to his teacher so all of them can make one. Lol
:(
You are extremely talented!! 🤩 Im putting this on my list of cosplay items to make!!
Hi! I recommend you to watch tis video about DIY iron man head!
m.ua-cam.com/video/2kjAU17Q0K0/v-deo.html
17:05 "Iron Manny"
I'm dying 😅😅😅
Can I order this?
No
Never
DIY for a reson
Just make it
U gotta make it
You are the best thank you for you doing❤
I know it's hard, bat please do not leave from youtube don't delete the channel😢
Make a iron man missil launcher.
Aka repulsor or blaster -_-
@@young19788 Stfu. He said missle launcher, aka the one in AOU ( Age of Ultron ). Just look at the scene where he blows up Ultron's metal body, he uses his missle launcher from his HAND!!
@@PizzaInSpace good point
I love how he basically apologies for getting sponsored by raid shadow legends lol
Because everyone gets sponsored by raid every yt channel ive been to have had a raid sponsor
Love how you used airpod boxes for the ear piece
You are a damn talented person.
He’s a true UA-cam with that raid sponsee.
You make this look so easy!
Estou fazendo o meu ,vc explica muito bem parabéns.
I'm going to make one too, how did it come out to you?
“While that was drying I just went ahead and invented a time machine and a jet pack in the 2 minutes my paint took to dry”