136 - Velocity 1 Pedal Setup X-Plane 12
Вставка
- Опубліковано 12 вер 2024
- Hi Simmers
Part (3) of my Turtle Beach Velocity One videos, and this time setting up and configuring in X-Plane12. We will look at initial calibration, assigning functions and finally response curves.
Let me know your thoughts below............
Happy flying !
My PC specs
* Corsair 5000D Airflow Black PC Case
* Intel Core i9 12900K 5.2GHz CPU
* Corsair iCUE H150i RGB Elite Liquid cooler
* Gigabyte Z690 Aorus Ultra LGA1700 ATX motherboard
* Corsair 32GB 5200MHz DDR5 Vengeance ram
* EVGA FTW3 Black Gaming 24GB RTX 3090Ti GPU
* Samsung 980 1TB NVMe M.2 SSD (O/S)
* Samsung 870 EVO 2TB SSD (Programs)
* Samsung 870 QVO 4TB SSD (Data - Ortho4XP etc)
* Acer Nitro RG321Q 31.5" QHD Monitor (Operator Station)
* Logitech Z607 Speaker system
* Win 10 Pro 64 bit
* EVGA SuperNOVA G1 2000W Fully Modular 80 PLUS Gold
* Corsair ML120 fans (x 9)
My cockpit setup
* Custom designed frame / panel
* 3 x Samsung 55" TV's @ 1080P each
* Simionic G1000 bezels and Switch panel
* 3D designed and printed standby gauges connected to Leo Bodnar Boards
* Dual control yokes with custom mechanical linkage
* 3 x Samsung 55" TV's @ 1080P each
* Simionic G1000 bezels and Switch panel
* 3D designed and printed standby gauges connected to Leo Bodnar Boards
* Dual control yokes with custom mechanical linkage
Appreciate the tip. Defiantly helped me control aircraft on the ground. 👍
cheers buddy. Hope it helped you some. Thanks for tuning in.
Great video…well my wallet doesn’t think so, but definitely adding these to a ‘must have’ list
You won't regret it buddy !! Thanks for watching....
@@CessSim it’ll be after the new PC (on order) and the big family vacation…so August timeframe or so. Also thinking about trying to tweak my setup to run X-Plane 12 (have to say I love your setup)
@@shadetreehomesim thanks mate. Certainly spent a fair bit of time on the sim over the years building it up, but very happy with it now.
How have you created this video, no VR headset i can see but VR panoramic views? Do these pedals work with Quest3 VR
I have 3 cameras working in parallel (Logitech C920). I use Streamlabs OBS for recording and streaming. Dont use VR although I have heard is pretty good.
Interesting video. Would a real aircraft have a dead zone though? The controls in a cessna are directly connected to the flaps / wheels aren't they?
Good point you raise. Not sure if the direct connection on a real C172 has any dampening ability with any tension springs or not. Would need to clarify that. If not, then would certainly agree there should not be any play at all.......
Nose wheel steering on a C172 doesn’t really have a direct connection to the pedals. Yes, the rudder is directly connected via cables, in the same way as elevator and aileron cables are connected to the yoke and differential braking uses a hydraulic system on each main wheel, but actual nose wheel steering is by a spring/bungee setup where it basically just pulls on the nose wheel a little. This means that firstly the nose wheel won’t budge unless there is some forward movement of the aeroplane and secondly the movement is a bit wishy washy and not really what you would call very direct.
@@c310sim6 thanks for the clarification! So, I guess that means it would be impossible to translate that into control response curves in the sim. It would need to be programmed into the sim model to make the wheels feel wishy-washy based on the inputs you make and the state of the aircraft.
@@c310sim6 thanks for the clarification. Appreciate the feedback.
@@flightsimdeskuk I guess so, but I think with a good set of well set up rudder pedals like these, I think it’s close enough to not matter.
I'm living a nightmare trying to figure out how on earth my Seitek and Velocity flight controls suddenly began operating "COUPLED" as in rudder to ailerons. I believe it had something to do with the latest xplane 12 update. All flight controls worked beautifully before with the right response curves. Can someone help me find what I need to do to uncoupled the rudder and ailerons? Thanks so much.
HI mate. That sounds like a first to me. Have you tried completely disconnecting the unit from the USB side, restarting XP without it plugged in and then attaching it again, perhaps in a different USB port?
@@CessSim Thank you Q8 - I have tried that and still have the problem. I think now I wwill delete ALL x-Plane and reload the Disc version X-Plane 11 and see if it comes back. Thanks again for the suggestion.
@@golson33 No problems. Would you not want to re-load XP12 first given that is the sim you are actively using?
Just insta VO today, it can go well for yaw when aircraft up in the sky. But I can steer left or right for taxi or when takeoff on ground. Please help…
What aircraft are you flying?
@@CessSim I uses Toliss A321 with Thrustmaster stick on Xplane12.
@@LeonDdragon try it with C172 and let me know if same issue..
@@CessSim I will