Snap Fastener Installation Tool Demo
Вставка
- Опубліковано 8 гру 2016
- Purchase the Snap Fastener Installation Tool here: www.sailrite.com/Snap-Fastener...
Snap Fastener Installation Tool is a small, two piece setting tool for snap fasteners. The metal anvil has two sides, one for setting buttons and the other for eyelets. This tool can also be used without the base for setting rivets. Great for setting nickel-plated brass snaps and Common Sense button-back screw studs. Not recommended for use with stainless steel fasteners.
Use of a 1/8″ hole punch is recommended to create a hole in the fabric for the snap barrel before setting. An awl may also be used in lighter fabrics to force an opening in the fabric weave for the snap barrel. - Навчання та стиль
Ms.Gratz!!! Thank you, thank you, thank you! I have a daycare and all of the bibs that I've purchased in the past have velcro. The cost for the snap button bibs, compared to the velcro is ridiculous! So after 18 years of being in this business, I just thought of putting on snap buttons myself. This video will help me tremendously! Thank you for doing this video. I really appreciate it!
You are welcome!!!
watch out Thor ! When I put snaps on thicker leather I have to make the holes a little bigger so the snap sits flush and seats well. I use a tapered tool that stretches the leather just enough to allow that then the leather gets tight again when the snap is set. Rocket Science !
I was just looking at my snap kit that I bought from Amazon, and no, I’ve never used it. But I checked it out and I was right. But I watched your video twice, just to make sure. Thank you for your time.
Glad it was helpful!
Thank you for showing how to install the snaps! I bought a package of Sontax brand snaps at the home improvement store. The instructions on the package were not clear. Your video helped me to understand how the pieces fit together. Your guidance ensured a successful repair.
I'm glad the video was helpful for you!
I have this exact same little kit. So I should not confuse this with rivets and rivet installation?
Can one apply this same principle to making a hole in wood?
Hey, thanks! Managed to make a nice knife case for a friend with a brass snap contrasting with the dark leather. Looks great!
I have an item that contains metal snaps, and I'd like to find the correct, matching snaps that go with it. How does one go about doing that?
Thank you!! I purchased the snaps, but couldn't find instructions on how to use them. They may have gotten lost. Thank you for the Video!!
Thanks for the demo, its a big help and much appreciated.
I was given this link to for instructions to install the snap set I bought, these are nothing (kinda) like what I bought. Umm er. So after lots of trial and miss I got the snaps to work. BTW, these are not the cheapest.
This was great thanks for this video it helped fix my Columbia pants where the snaps broke. Used this video and like new.
En donde consigo la herramientas para poner esos broches
Watching this after the fact that I put alot of fasteners together on a jacket! Pretty strong fasteners!
Show as the used whith steel please
Great demonstration. Thanks!
Do you sell a snap system for leather work?
thank you! i appreciate it! it is amazing how many things i could have fixed or saved!
What can be done if the post will not sit any tighter against the socket? I am using the same tool kit (from General) for the same nickel plated snaps. I keep hammering but the post will not curl down flat enough for the snap to work.
What is the length of the button's barrel, is it 11/64", 1/4" or 5/16" (just give me the Sailrite item number, if that easier for you)? Then how many layers of fabric are you installing the snap into? Finally which snap installation tool are you using from Sailrite?
Where you buy that tool
Thank you.
I can't get the first one, only the second part
Please tell me you guys sell a kit. I dont want to spend the next hour trying to figure out all the items I need to put in my shopping cart.
Can you combine the male and female snaps together like reversible? I'm trying to fix my mss sleeping bag.
I am sorry, I do not understand the question. Can you email me a photo of what you are trying to do? eric@sailrite.com
Could nonmetallic snap button
What difference between nickel plated and stainless, which the nickel is necessary?
Nickel plated brass or Stainless Steel which should you use? Both work well and are approved by Sailrite for marine use, even in saltwater conditions. However Stainless Steel is slightly more corrosion resistant than nickel plated brass and Stainless Steel is a stronger metal, so it is often considered a slightly better snap.. With that said most of the OEM boats use nickel plated brass over stainless steel snaps. Why? They are cheaper and easier to install than the SS.
@@SailriteDIY Thank you, I had the same question
I NEED that tool,!!
You can purchase it here: www.sailrite.com/Snap-Fastener-Installation-Tool
Gracias
I love you…..lol 😜🤣 you made this so much easier for me thank you!
I can tell from the narrators voice..you can take his word these are good button snaps.
🤣
Very nice 😅 2:21
great video...my snaps are in place but when i hit them (sockets) with a hammer with the tools they seem to split....
If the snap barrel splits it usually means they are a cheaply made snap. Sailrite only offers the best quality snaps from DOT, the barrels of the Sailrite snaps do not split.
duh !
you need a bigger mallet
Cool video but I will say , she needs a bigger mallet if there is one in this universe.
There is only one hammer larger, and THOR is using it... lol
cajunsk
Lighthammer
😂😂😂😂
Cool video...
Um....I how can I get the snaps to attach with just a hammer....
Well you need a snap fastener installation tool and a hammer. Then they can be installed.
Thank You
thank you!
Is there anyone that used this a couple of times and still come back to the video ?
That’s me.
Always have to come back to figure out which is which.
😄
Lot of thank
Thank you!!
Very nice
This will fit on 10mm thickness?
If you use a snap with a barrel length of 5/16 inch it will accommodate thicknesses of up to: From 11/64" to 1/4"
Screw the setters, I want that mallet. Looks like it came right out of the forge of Hephaestus.
You can purchase that mallet here: www.sailrite.com/Mallet-Hammer-Style-3
Just cracked the fuck up at this
Im With 86: What's that?
Great 👍 working
My kit came without the Anvil, so guess it's usless unless I can figure out another way to use it without...Thanks...
You must have the anvil or it will not work. If it was purchased from Sailrite please contact us with your order number and we will resolve that issue.
@@SailriteDIY Thanks but it wasn't Sailrite, got it on Amazon from company called Seloky...appreciate it though, I've ordered a set from a different company with just the tools...Thanks again...
Thanks for this! I’m stairing at my kit and tool and was like don’t bother hit up UA-cam.
It would be better if they showed the parts more. Her hands cover up too much.
Merci !
Know that I have this info, I'm attaching the tops of cowboy boot to my crocs
I want that hammer, gotta get one !!!
You can get that mallet here: www.sailrite.com/Mallet-Hammer-Style-3
SANGAT MEMBANTU. TAPI SAYA TIDAK TAU DIMANA MEMBELI ALAT UNTUK MEMASANG KANCINGNYA 😫
Why not stainless steel?
The choice is yours. Nickle Plated Brass or Stainless Steel Snaps. Stainless Steel is the best choice, but nickle plated brass is still a good choice.
ممتاز ممتاز👌🏻
i live downstairs."knock it off!" lol kidding.... thank you.
holy crap lady your mallet puts Thor`s hammer to shame..
Thank u so much
U R SEW VELCOM.
Fixed my wallet. Thank you. :)
awesome
🥰🥰🥰
PLEASE SLOW DOWN AND IDENTIFY EACH PIECE SEPARETLY. I AM A BEGINNER SO I KEPT GETTING LOST.
Why can't this dude pronounce the "L" in Sail.
Good for leather belts too 🙂
Thumbs down, Hammer not big enough
She thinks she’s Thor lol
Thor and Thor LOL
NOT CLEAR! You need to do a close up! AVOID these fools!
Useless demo as no proper time to identify sequence of part assembly
thank you!
You are welcome!