Ford Everest 2018, How to Duplicate Key and Key Fob
Вставка
- Опубліковано 26 сер 2024
- Ford Everest 2018 Remote Key Duplication DIY
Requirements: 2 Original remote keys
Procedures:
1. Buy a Blank Remote Key fob 433 MHz
These are my shop, Good quality products with the lowest price.
Shopee: : bit.ly/3uupB8Q
Lazada: bit.ly/3BgFVhq
2. Cut the blank key at SM (Keycards)
3. Test the newly cut key to see if it can open the door.
4. Program the key
• Insert key1 to ignition and switch to Accessories (do not start the engine)
Wait until all the lights in the dashboard are lit.
• Remove key1 and immediately insert key2 and switch to Accessories. (do not start the engine) Inserting key2 requires to be done in 5 secs.
Wait until all the lights in the dashboard are lit.
• Remove key2 and immediately insert key3 and switch to Accessories (do not start the engine). Inserting key3 requires to be done in 10 secs.
You will hear the locks when the programming is done.
5. Test the key to see if it can start the engine.
6. Program the key fob
• The system has to be in programming mode to do this procedure.
• Insert key1 and switch to Accessories 8 times (I did not see any signal that the system has been in the programming mode)
• Press the lock button from key1, key2, key3
• All done
7. Test the new remote to see if all buttons are working.
********************************************************************************************
How to duplicate key ford Everest key for Ambiente.
1.
key1 = original key without remote
key2 = original key with remote
key3 = new key (make sure this is already cut and can open the door lock before you proceed)
2.
insert key1 and turn the ignition to accessories ( do not start the engine)
3.
wait a few seconds until all lights are lit
4.
then remove key 1
within 5secs, insert key 2
turn the ignition to the accessories
wait a few seconds until all lights in the dashboard are lit, then remove key
5.
insert key3
turn to ignition
wait a few seconds until you hear "kapak"
All done!
******************************************************************************
What if you have only one key? Where to duplicate outside CASA? (PH only)
Try to contact the following, they both offer home service for a reasonable price.
1.
/ kazumi-car-care-520550...
2.
Sir Randy: 0917 138 1802
3. / 3162670347323385
Thank you very much sir, gumana yong sa akin, basta sundin lang yong procedure, napaka simple, sana marami pa kayong matulungan,, God bless sir.
Salamat din po sir sa panonood at sa tiwala! sana ay sa akin ka bumili ng remote hehehe. anyway kung sa iba ka bumili okay pa din at least naka DIY ka hehehe. God bless po.
Thank you very much po! Sinunod ko bawat hakbang from purchasing hanggang sa settings. Isang remote key na lang kasi naiwan sa Ford everest 2018 ko, di talaga pwede ang 1 key nag attempt ako so, gastos talaga ako ng 2nd key. Don't bother going to ford to purchase, they charge so exorbitant.
Ang pag program lang sa key fob yung turn 8x times medyo na full turn off ko tapos lock yung 3 keys. Akala ko palpak, ulitin ko sana pero pag testing naman, abay isang beses lang gumana kaagad! All system is good. Now I got 3 keys.
I'm extremely grateful sa guide na binigay nyo. Again maraming salamat po.
masaya po ako sa iyong sucessful DIY!
now, you are safe! mawala man ulit ang isa ay 2 pa ulit ang matitira. kaya makakapag DIY ulit po kayo.
Saan ka nagpaprogram ng 2nd key fob mo?
Followed the istruction to duplicate a key for my 2017 Ford Everest Ambiente. It worked. Super dali lang, just follow the instruction in the description. Total Cost is around 1,650. Ph879 for the key including delivery fee plus Php750 for the cutting. Imagine, compare that to Casa 😁 Salamat boss! I recommend na magpaduplicate na kayo kasi pag nasira orig baka mas mahal na. Thank you boss.
salamat po sa tiwala!! pa rate din ako po sa shopee ko or lazada. para pang encourage din po sa mga iba pa. maraming salamat po sa tiwala!
@@melvinbilasanobudgetarian3507 done na po sir. Thanks po ulit. Looking forward sa iba pang video - hacks, upgrade, DIYs
Sir dalawa ba yung key mo na may remote? Yung nabili ko kasi na Ambiente isa lang may remote, yung isa plastic handle lang.
@@rydelatorre21 isa rin lang po talaga pag ambiente
@@goodmusic2ursoul ty, ganun na nga pala. hehe
thank you very much ... I followed the instructions to program another spare key for my Everest 2016 ... it worked well
I cannot be happier when someone elese is happy to get a successful result. Enjoy! and wait for my following informative videos!
I am just too busy nowadays that's why I cannot make new videos.
Enjoy!
Paano if isa lang ang original key fob?
@@melvinbilasanobudgetarian3507 hi sir. Pano po pag isa nalang ang original ng key fob. And hanggang ilan po pwede i copy? Thank you
@@levis27reyes
pag isa na lang po ang key, andyan po ang solution sa description, pili na lang po kayo sa mga contacts na nandyan. inquire po kayo sa kanila.
Hanggang ilan ang pwede i copy? Unlimitted po, hanggang magsawa na po kayo sa kaka duplicate. pero sa nababasa ko po sa page ay hanggang 2x duplicates ang ginagawa nila. total of 4 keys sila with remote or keyfob.
sakin naman 3x lang + 1 key without keyfob, for emergency ko itong key na ito. I suggest magkaroon din po kayo ng emergency key na walang remote.
@@ryanramiterre magpapaduplicate po muna kayo sa mga nagduduplicate na mura. wag po sa casa sobrang mahal dun. nasa description po ng video na ito ang mga choices nyo. feel free to inquire po sa kanila. Di ko po sila kilala, nakita ko lang din sa mga post ng iba na dun sila nagpagawa.
Thanks sir... i tried it and it works....
Sir ace paano po mag program sa everest kung isa lang ang remote pls help po
Thank you sir sa tutorial mo laking tulong
Salamat po sa panood. Pa subs po thanks
Ano yung "hello ding ding pie" nya sir? At pano yung mustang welcome screen?
Ding ding pai ay Dash cam po yun. DDPAI Dash cam. Gawa ako review yan one day.
Tapos yung mustang startup ay Sync 3.4 yan. update
Hi sir, I have only one key remote. How can i do for duplicate ?
Sir, pwede din po ba ito gamitin sa 2019 Ford Ranger XLS? Salamat po sa reply. Godbless.
not sure pero siguro pwede din po, di ko pa nasubukan sa ranger. meron po ako tinda remote key, di ko pa lang nailalagay sa shopee ko. ilalagay ko siguro today.
Goodday po! ka bibili ko po sa inyo ng spare remote key...my pblem po is na putol na si remote key na original! How to program po without the original remote key.
chat nyo po ako sa messenger ko. para help ko po kayo.
Salamat sa pag-share. God bless.
Salamat sa idea sir!
baka po meron kayo tutorial paano po mag enable ng auto lock para sa Ambiente 2018. Di ko masabayan yung sa manual at wala din sa instrument panel.
enable ng autolock? pag umaandar na yung car for 20kph?
alam ko po default yun ah.. anyway, sa trend po pwede ko kayo help kasi trend po yung sa akin, sa ambiente po ay hindi ok po maituturo sa inyo kais wala po akong ambiente eh. sorry po.
Hi sir question po nag try Ako at sinunod ung instructions nyo however iisa n lng ung key nmin Ng ford everest titanium 2018 din lost key n ung isa na noticed ko po dlwa ung pinapasok nyo n key ung original sk duplicate sk ung irereplicate d ko po ma pa start engine ung bagong bili ko pero nbubuksan nman ung pinto
hindi nyo po yan ma DIY kapag isa lang ang key nyo.
need nyo po magpa program sa mga may programming tool.
saan po ba location nyo. may programming tool ako.
kaya lang hindi po ito libre ah. mahal kasi ang tool.
Let me know po your location.
@@melvinbilasanobudgetarian3507 magkano magpareprogram ng 1 key fob sa inyo?
Hi Sir, meron po ba tutorial sa mas older model ng everest, yung 2013? Tnx
hello sir, wala po ako everest na ibang model eh, kaya hindi ko po alam kung paano or pwede mag duplicate ng ibang models. Pero don't worry po, mag service na ako ng key duplication para sa mga ibang sasakyan na nawalan ng extra keys, or sa kahit anong sasakyan, wait mo lang sir.
@@melvinbilasanobudgetarian3507 thank you po.
Pano po natin malalaman kung anong frequency ng susi na gagamitin sa particular na suv?
Very easy lang po.
www.wikihow.com/Calculate-Frequency
Thank You sir. nag work Ford everest ambiente. 1key and 1 remote
Hi sir 1 remote lang at 1 duplicate nag work sa ambiente ung procedure ok fine if ever
@@chitocarlos2028 hello sir, panu yung procedure pag clone ng fob
@@ronaldtan5453 ok sir i try ko ung 1 key 1 remote sabi nag worked daw oorder na ako sa lazada ng duplicate key salamat ronald tan
Sir nick paano po procedure sa everest ambiente 1key and 1 remote pls help
@@chitocarlos2028 pano nyo po napagana yung autolock ng replacent key? Anong ginawa nyong procedure? Wala kasi sa description yon. Thanks sir
Slamat boss...
Sir same process po ba kahit 1 original key lang ang meron sa akin? Thank you
hindi po sir eh. kung papanoorin nyo po ulit ang video without skipping sinabi ko po dyan na 2 keys po ang required para makapasok sa system programming mode. sorry po. Pero ang palagi ko po suggest sa mga isa na lang ang key ay pagawa muna sa locksmith, pero yung key lang na walang remote pero may transponder para mura lang. yugn pang ambiente, key lang sya, wla remote pero nakaka start ng engine ah. hindi pwede yung sa door lang hindi gagana yun. then pag 2 na ulit key mo, pwede ka na Mag DIY, para kahit mawala yung isa mong key ulit ay may 2 ka pa rin natitira. mahal kasi talaga sir sa labas. pinakamura nyan 3500-5k yan. sayang po pera. sa akin lang din bumibili ng remote yung mga locksmith, biruin mo, nabili nila 800 tapos benta nila 3500.. kaya wag na po manghinayang mag DIY duplicate na po.
kung gusto nyo po help ko po kayo kung saan magpapagwa ng key. chat nyo po ako sa facebook ko. melvin bilasano
Sir, may paraan po ba makapag-DIY duplicate kung wala po yung 2nd original key? Nawawala po kasi yung 2nd original key ko. Salamat po.
negative po. check nyo po description ng video nandun po binigay ko link kung saan kayo magpapagwa ng mura.
@@melvinbilasanobudgetarian3507 salamat po sir. God bless you more po!
Sir pwede sa ford focus 2010 hatchback po?
hindi po sir eh. magkaiba po ang frequency and ID Chip po ang ibang ford cars po. pati yung blade po iba din po. sorry po.
Nice video brother. Question. All ford vehicle will work tong steps na ito? Kailangan ba dalawa original remote?
salamat po sa panood brother at sana mag subscribe ka din.
Q: All ford vehicles will work tong steps na ito?
A: not sure. but for Everest is working, that's what I just tested po. Other modesl I cannot guarantee otherwise you will blame me once it failed.
Q: Kailangan ba dalawa original remote?
A: No, 1 key with remote plus 1 key without remote is okay.
1 remote key only is not possible. Because both keys are required to enter the system programming mode.
Salamat bro. Subscribed nadin.
@@raymondfrancisco813 salamat po
433mhz pa din po ba ang next gen na everest?
434.2 po yung DIY Remote Programmable.
Meron po ako tinda nyan. sa shopee ko at lazada..
Actually sir, ito pong sa Gen4 ay 434.2mhz din, mali lang yung description nung nasa lazada during the time na nag video ako. kasi wla pa ako scanner nun eh. pero now meron na ako scanner kaya alam ko na 434.2mhz pala yan, not 433. but anyway. yung iba din naman label nila 433 mhz pero pag sinukat ko 434.2
Para makasiguro ka sir, sakin ka bumili, legit. may DIY video tutorial pa.
shp.ee/bg8iv3r
Dito po ang legit na 434.2mhzz
Sir what if iisa nalang yung original na na key/keyfob ko? Nabili ko lang kasi 2nd hand si everest wala na yung isang key
Dyan po sa description ko may mga pwede po kayo magpagawa ng isa. then pag dalawa na po ang keyfob nyo, pwede na kayo mag DIY ng pangatlo at pang-apat.
may naka try na ba nito sa ford ranger T6? (2.2 2020 MT sakin)
pag po same ang keyfob nyo ay same alng po yan.
Sir pano po pag isa lang talaga ang original keyfob ko? Ford ranger 2021 po unit ko
palagi ko po ina-advise ito sa isa na lang ang key.
magpaduplicate po muna sa labas. meron ako dyan mga link sa description ng mga mura lang maningil around metro.
then pag 2 na ulit key mo, mag DIY ka na sir ng another 2 keys.
tago mo lang ang 2 orig keys mo.
kasi di natin alam baka mawala na naman isa dyan. at least di kana gagastos ng malaki sa pa duplicate sa labas. Mura lang magagastos sa DIY. 799 lang key sakin, tapos pa cut mo lang sa keynamics 500 lang yun. 1300 lang gastos mo.
sa labas pinakamura mo nyan 3k, swerte pag may 2500.
Nasa description ang link ng shop ko bossing. stock available. ship agad.
Pano pag isa lang yung original key. Pano mag add ng isa pang key?
yan po ang masakit, marami ng nalungkot dahil hindi sila maka DIY, nagtanong baka may solution pa pag 1 na lang ang key. kaya lang wala na po talaga.. Ford System Requiered 2 keys to enter the programming mode.
Solution:
Go to locksmith, as to duplicate key, kahit walang remote basta key alng na may transponder yung makaka start ng makina. baka mas mura yun.
then, after successful duplicate from locksmith, mag DIY na po kayo ng pangatlo, wag na manghinayang pa kasi baka umiyak na naman kayo sa pangalawang pagkakataon pag nawala ulit ang isa.
Paano humanap ng locksmith?
madali lang po. Search in google, your area + locksmith, halimbawa. Bataan Locksmith, or Batangas Locksmith, or Nueva Ecija Locksmith, Or Naga Locksmith, or Cebu Locksmith. Tyak na lalabas mga locksmith dyan. pili na lang kyo pinakamura. yung may remote key duplicate range price nyan 3k to 5k. sa iba umaabot pa 6k. yung key lang na walang remote pero may transponder baka nasa 1k lang or 1.5k. im not sure.
Bossing pano poh kapg sa Gen 3 ang pagduplicate? Tnx poh in advance
bossing sorry po. Hindi ko alam kung ilan hz ng remote nyo. tapos yung procedure im not sure din kung same lang. you can try,
Sir, applicable din ba sa Ford Ecosport 2019? Same rin kasi yung remote key fob nya sa everest.
hindi ko po nasubukan sa 2019 ecosport.
pwede nyo po try mura lna gnaman.
sa ecosport club meron po nag share ng procedure
nagtry ako nyan sa ecosport 2015 ng kapitbahay namin.
remote lang napagana ko, ang susi first start engine lang gumana, sa mga susunod ayaw na.
iba ang procedure nya sa ecosport. nakalimutan ko na kung saan ko nahanap yung procedure, sa eco club yata or sa youtube. matagal na kasi, di ko na maalala. pero meron yan. tanong tanong ka lang sa eco club.
Hi. What if nawawala yung isang original key? 1 nalang natira. May remedyo pa ba? Thanks!
hello sir, yes sir, absolutely may remedyo pa po.
if babalikan nyo po itong video na ito check nyo po sa description sa gawing ibaba nandun na po ang kasagutan mismo sa tanong nyo.
Kailangan po ba sir dpat 2 key ggamitin or ok lng 1?
kailangan po 2keys. requirements po yan
Ganyan din problem ng frnds ko kaya lang isang key na lang orig nya nawala kasi yung isa kaya balak sana ipaduplicate.
Sir. Pede po kaya ito s ford ranger wikdtrak? 2 buttons lng po.
di ko pa po nasubukan sir.
try mo po
Kailangan 2 remote keys or pwede 1 remote key, and 1 manual?
kailangan 2 active keys. pwedeng isa with remote at isa walang remote. pang ambiente ganun, isang remote isang key na walang reomte.
pwede ka naman sa iba bumili, nasa iyo yan.. sakin orig
Ayun, everest din kse un amin around 2018 ot 2019 ata yun, tapos ang susi lang na meron is 1 remote 1 manual, so pwede na pala yun gamitin para makapag duplicate ng bago.
Yung ibang nakita ko na instructions, pag mag ads sila ng key, turn key 3x tpos open close door ata, iba pa pp ba yun?
@@JPineda24baka ibang sasakyan po yun. di kasi pare-pareho
Pwede po ba sa everest 2016 titanium yan?
Papano kung isa lang key na may remote. Yung isang key ko kasi walang remote. Plastic handle lang talaga.
sa ngayon po ay locksmith is the answer po. order po kayo sakin ng 2 new keyfob. pa cut sa SM keycards, then ipa progra sa locksmith ang isa, then DIY program ang isa.
soon magkakaroon ako ng programming tool. para makamura
Please help po paano gawin kung isa remote lang
try mo pa rin follow yung procedure, use key1 and key1. kasi isa na lang ang susi mo. wala ka na key2.
pag di gumana ay di ka naman talo kaso gagana yang bago mo kahit sa door lang
@@melvinbilasanobudgetarian3507 Thank u sir oorder muna ako sa lazada
@@chitocarlos2028 sir..good day gumana po bah kung key1 key1 lang ginamit? Plano ko kasi mgtry niyo...kasi iisa lang ang remote key ko...slamat po
@@dgwaltermark Sir hindi po gumana
Kung ambiente and isa lang kasi remote, pano po mapopogram yumg key.fob? Thanks. Sa instruction nyo po kasi sa description is walang programming. Thanks po
Update: nag order na ako pero cinancel ko muna kasi waiting pa sir sa instruction to progtam autolock for ambiente. Thanks po
Hello po. salamat po sa inyong panood. at sana po ay sa akin kayo nag order. Mr.Budgetarian sa lazada at shopee. nandyan po sa link ng description.
yes sa ambiente po ay pwedeng pwede at marami na din po akong na duplicate na ambiente. at mga nagtanong sakin about ambiente. nasa description po ang special procedure for ambiente. pero lagay ko na din po dito para di na kayo mahirapan pa. kayo pala yung nag cancel order sa lazada na twice. sige po proceed nyo na po ang order nyo. rest assured makakapag duplicate po kayo. sa baba po nag procedure. Yes,, walang instruction sa programming ng keyfob, kasi sir sa ambiente ay special, after nyo ma program ang key ay automatic kumukuha na sya agad ng program dun sa first keyfob nyo. ganun po ka special ang ambiente. rest assured po maduduplicate yan, wala pa pong issue na nag fail dyan sa ambiente duplicate. basta may 1 key + 1 key with remote ah. bali dawala pa din. isa lang ang may remote. okay.
********************************************************************************************
How to duplicate key ford Everest key for Ambiente.
1.
key1 = original key without remote
key2 = original key with remote
key3 = new key (make sure this is already cut and can open the door lock before you proceed)
2.
insert key1 and turn the ignition to accessories ( do not start the engine)
3.
wait a few seconds until all lights are lit
4.
then remove key 1
within 5secs, insert key 2
turn the ignition to the accessories
wait a few seconds until all lights in the dashboard are lit, then remove key
5.
insert key3
turn to ignition
wait a few seconds until you hear "kapak"
All done!
@@melvinbilasanobudgetarian3507 ok po sir salamat sa confirmation
@@goodmusic2ursoul okay po, i suggest pag order mo samahan mo na din ng carbon fiber silicone case, tapos meron din G-Hook, para di magasgas ang remote mo. suggest lang naman.
Sir, we followed your instructions sa pag format ng key fob. Umaandar na kasi siya when used to turn on the engine. Kaso ayaw nya mag format. We followed exactly the way you did it. But ilang ulit na namin ginawa ayaw nya talaga mag format. May mali kaya sa key fob or baka may mali kami sa pag format. Any help from you will be greatly appreciated. Tyia.
anong car variant and year model po?
make sure na accsorries mode lang po ang pag switch on ng key not start engine.
chat nyo po ako sa messenger
facebook.com/melvin.bilasano/
Trend 2018 model po
@@charlemaignemeracap4133 same model po pala tayo, baka po walang chip ang nabili nyo pong remote. dapat po gagana yan kung okay ang nabili nyong remote key.
Boss Pano kung 1 lang orig key nawala ung isa kaya padin ba?
parang malabo na. pwede mo try, key1 and key1 lang gawin mo. 2x mo isalpak ang key1, malay mo gumana. pag di gumana ay di naman nasayang ang pera mo dahil gagana naman sa door yung key na pina cut mo
Gumana ba isang key lang?
Kamusta sir? Gumana ang 1 key lang? Tnx!
Sir pano omorder po?bkit wlang lumabas sa lazada ko ang ganitong link po?
Gud am Sir Melvin! Yung sa 2016 ambiente, key 1 no remote, key 2 with remote, key 3 new duplicate. Dun sa procedure nyo sa key 1 at key 2 eh hangang accessories lang sya within 5 seconds. Yun pong key 3 eh hangang ignition na po sya, hindi accessories lang din? Parang I-start na Ambiente tapos marinig po yung "kapok" sound na sinabi nyo?
Additional po, after gumana na po ang key 3 sa pag start ng Ford, paano po ang programming sa keyfob naman po considering na isa lang ang remote nya, key 2.
Hello po sir Julius, yes po, may exact procedure po ako type written dyan sa description for ambiente. hanggang ACC lang po lahat ng pihit. no start ignition po baguhin ko po instruction hehehe para po malinaw. .
How to duplicate key ford Everest key for Ambiente.
1.
key1 = original key without remote
key2 = original key with remote
key3 = new key (make sure this is already cut and can open the door lock before you proceed)
2.
insert key1 and turn the ignition to accessories ( do not start the engine)
3.
wait a few seconds until all lights are lit
4.
then remove key 1
within 5secs, insert key 2
turn the ignition to the accessories
wait a few seconds until all lights in the dashboard are lit, then remove key
5.
insert key3
turn to ignition ACC.
wait a few seconds until you hear "kapak"
All done!
Gud pm Sir Melvin! Gumana na po yung sa key 3 sa ignition at nag start na Ambiente ko. Ang question Lang po eh paano naman sa remote ng key 3 gagana considering na key 1 eh walang remote?
Wait po...
kapag po kasi gumagana ang ang key3 sa ignition, nakakapagpa start na po ng engine, ibig sabihin po automatic na program na din po ang remote nyo.
madami na po sir nakapag duplicate ng ambiente, kahit po ako ilan na din na duplicate ko nyan na ambiente, same procedure lang ginagawa ko. pag gumana na po ang key3 sa ignition , nakapag start na ng engine, gagana na din po ang remote. No extra procedure.
check nyo po remote nyo, for sure gagana na yan.
Negative Sir Melvin. Hindi pa rin gumana remote. Sinubukan ko ulit ngayon. Baka dead battery na po siguro. Matagal ko na pala order ito sa Lazada before, July 2022, ngayon ko Lang ulit nasubukan at naalala. Napatago po kasi. Sa videos nyo din ko napanuod. Try ko muna change battery po.
pwede ba to sir 2014 model??
Kasi ung isang key nang everest 2018 is nabasa po. Nang tubing dagat po Kaya ayaw nang gumana ang isang key ko po
Sir. Pano kaya sa ambiente? 2 keys pero 1 remote lng. Pano po kaya ipprogram sa lock?
kung 2keys meron ka sa ambiente pwede sir sa susi lang. pero kung buy ka ng remote na 433mhz sir ay try mo na din itong procedure. kapag naduplicate mo pati yung remote ay good news po yan. update mo po ako ha. sa halagang 1k po di na masama.
Pwde sya. Same sa instruction. Gumana sakin
Sir anong yer model po ng everest mo?
2018
sir pano kung isang original key lang meron ako, nawala yung isa?
yan po hindi na pwede ang ganyang procedure. required po nyan ay 2 susi
The 2019 start button works the same way, right?
actually I am not so sure about that.
I've never seen a 2019 Model yet. but my best guess says YES it is.
Imo, if the 2019 key fob looks the same then yes its the same.
Good luck and enjoy!
@@melvinbilasanobudgetarian3507 New remote, I programmed it successfully, but I pressed the lock button. Unlock does not work, what should I do? Thankyou.
@@tumaniter oops! if the keyfob you've bought has no issues then that should work normal.
imo, your new keyfob has some hardware problem.
Try to reprogram it again, repeat all the steps, then check if it will solve the problem. If not, then buy new keyfob.
You are the first one encounter that problem. can be a damaged keyfob.
Magandang araw sir. May adventure kasi ako 4 buttons sya tapos may nabili akong susi na two buttons. Same method kaya ng gaya ng ginawa nyo?
Magkakaiba po ang procedures. Kasi sa ford ecosports nga po ay iba din. Di ko po alam sa Mitsubishi.
@@melvinbilasanobudgetarian3507 okay po maraming salamat
Does this blank remote key FOB 433 mhz can use with Ford Everest 2012
I did not tried 2012 model
Hii sir lost my spare key. Ngayon po isa nlng yung susi ni eve pwde kaya gawin ko yung ginawa mo sir? Mag wowork kaya?
Sorry sir. Hindi yan pwede. Required 2 keys to enter into system's prgramming mode. Need nyo po pa duplicate. Nilagay ko po sa description ng video mismo yung nagduduplicate nyan sa makatarungang halaga. Contact nyo po sila. Wag sa casa from the moon mga pricing nila
bossnpano kung nawala na ung spare key?
isa na lang key na meron ako
try mo pa rin follow yung procedure, use key1 and key1. kasi isa na lang ang susi mo. wala ka na key2.
pag di gumana ay di ka naman talo kaso gagana yang bago mo kahit sa door lang
Na try nyo ba 1 key lang ? Gumana ba?
@@tanti4760 hindi po gagana any 1 key. Masi need 2 keys to enter the programming mode. Sana po pinanood nyo mabuti Yung video. Nine plain ko na naman po lahat
Idol wa la ka fb idol di kita makita sa fb idol
idol kahit baby ngayon may FB na heheeh ako pa kaya ang wala. search mo lang name ko makikita mo sa fb yan idol hehehe.
sir tanong lang po pwidi poba ang key sa lazada gumagana poba hindi naba kilangan pa program
Yes po gumagana.
Kung pinanood nyo po ng complete ang video na yan ay im sure di na dapat kayo nagtanong. Sinabi ko na dyan kung saan bibili, meron pa link sa lazada mismo.
Tapos pati procedure complete details. Sana po pinanood nyo mabuti. Anyway, salamat po sa interest kahit sa title lang. Kung may tanong pa po kayo pls watch the video complete.
Sir aking unit is pick up. 433mhz parin ba bibilhin ko? Tnx
And paano kung isa lang ang susi ko sir paano sya i program?
Sir pwede po ito sa Everest 2010 model?
all ford cars from 2007 and up.
try mo po sir. hindi ko pa kasi na try mahirap naman sabihin ko sayo siguradong pwede tapos pagbili mo di gumana
@@melvinbilasanobudgetarian3507 thank you sir. Try ko pa din. Kasi di na po gumagana yung dating remote.
@@timothysignio6425 sir..iba procedure ng everest 2010 nio sir .I think yung remote ng everest nio is 2 buttons only and naka separate is in it?Pwede ko kayo turuan how to program your car.
@@lester4752 sige po sir paturo po hehehe
@@timothysignio6425original pa po ba ung alarm nio?I mean original pa ung remote nio Factory alarm?Gagana lang tong procedure nato sa mga original pa at hindi napalitan ang alarm
For Ford Everest 2006 -2014
Note:Yung Everest na may gulong sa likod
1.Close all Door and open driver side door
2.Turn ignition Off to On (3 times)
3.Close and Open Driver Side door (3 times)
4.You will hear the lock and unlock cycle indicating that the vehicle is in Programming mode
5.Press lock on the 1st remote
6.Press lock on the 2nd Remote
7.If 2 or more Remote ang iproprogram nio click lock sa lahat ng remote
8.Close door
9.Test the Remote
Works with 2014 everest? Same frequency?
I did not tried 2014 model.
@@melvinbilasanobudgetarian3507 Thank you.
Sir yong referral mo si Randy gumagawa ng duplicate key ng Ford Everest. Sabi ko 2017 model gusto ko remote din . Lost na yong duplicate. 30 mins lang tapos na at minimal amount yon ang sabi nya. From San Juan. I am from Bataan. Tanong ko lang totoo yon sir? thank you.
sa kanya mo po itanong sir, di ko po sya personal na kakilala. tinulungan ko lang po ang mga kagaya nyo mag contact ng mga kailangan magpaduplicate. kasi kadalasan tanong ay "may alam po ba kayo sino nagduduplicate?" kaya po nilagay ko na dyan.
at kung tanong nyo po kung totoo na 30mins lang tapos na yung duplicate ay opo kaya po ng 30mins. madali lang po yan cut then mabilis lang din po program, baka sobra pa 30mins.
yan po ay base sa aking experience. again di ko po kialla yung Randy./
Sir nawala yung isang orig key ko, di na ba ako makapagprogram ng bago?
kung 1 na lang key mo, sorry. di mo magagawa yang diy video.
pero pwede ka paduplicate sa labas. hanap ka.
Sir pwde ba ang 433 sa ford everest 2016?
Oops, im not sure ha, pero parang same lang tayo ng key 433mhz
@@melvinbilasanobudgetarian3507 cge sir try ko nlng salamat po
Pwede rin po kaya yan s ranger xls,isa lng remote key ko?
Basta 2 keys. Isang may remote at isang wala pwede.
@@melvinbilasanobudgetarian3507 nagtest ako sir ayaw gumana sa ranger ko
Sa ranger ko rin ayaw gumana
Sir. comes with logo po ba
yes po. ford logo. naka double sided tape. ididikit mo na lang
sir pwede po ba ito sa ford everest 2014 model gen3?
433mhz din po ba?
Following
Sir, pano kung yun ranger ko 1 susi lang ang may remote na binigay? Salamat
yang ang masama kung isang susi lang.
pwede ka magpaduplicate pero pang door lang.
pero kung gusto mo subukan pwede naman, buy ka ng remote then gawin mo yung procedure sa video pero instead na key1 and key2 ay gamitin mo key1 and key1.
2x mo saksak ang key1
@@melvinbilasanobudgetarian3507 sa everst ambiente 1keyfob and susi lng. Gumana pa rn yung process nyo sa spare keyfob to start d engine at remote sa door locks
Sir Melvin, baka po may answer kayo dito.. waiting din po ako sa sagot ninyo po. salamat
Sir di na gumgana ang remote after mag replace ng battery..
battery ng ano po sir ang ni replace nyo?
@@melvinbilasanobudgetarian3507 remote sir. After ko pinalitan di na nag detect ang dalawang remote
@@jppaglinawan5511 sir, baka lobat na din battery na ginamit mo. check mo din mabuti yung previous battery, same dapat number ng bibilhin mo. kapag di pa rin gumana ay ipa check mo na remote mo. baka sira na. wala pa issue na ganyan sa everest na after magpalit ng battery hindi na gumana.
Sir melvin nawala po ung spare key at 1 lang remote key ko paano po kaya yon kung order ako ng duplicate sa lazada dko ma program please need advise
Ang pgkaalam ko nyan nid mo ang 2 orig keys para ma prog mo ang 3rd key same sa video. In ur case nid na ng key programmer to be connected sa obd.
Na try mo kung gumana isang key lang?
@@tanti4760 sinubokan ko dati di gumana. Nid tlaga ang 2 orig keys para maprogram ang 3rd key
@@royaprilsobre saan po ba pwede pa program ng keys sir if ever bihili ako ng spare tas pa reprogram ko na lang
@@JrapMotoVlog kung complete pa yung 2 keys mo, sa susian lng ng sasakyan mo gagawin using d 2 orig keys. Gayahin mo lng yung proseso nasa video.
Sir pwede po b sa ambiente yan?
Yes pwede, dami na ambiente dito. Wala pa mintis yan. 100% accuracy
@@melvinbilasanobudgetarian3507 sir, panu po yung gagawin?
@@ronaldtan5453 same procedure lang sir.
@@ronaldtan5453
How duplicate key ford everest key for ambiente.
1.
key1 = orig key without remote
key2 = orig key with remote
key3 = new key (make sure this is already cut and can open the door lock before you proceed)
2.
insert key1 and turn ignition to accessories ( do not start engine)
2.
wait few seconds untill all lights are lit
3.
then remove key 1
within 5secs, insert key 2
turn ignition to accessories
wait few seconds untill all lights in dashboard are lit, then remove key
4.
insert key3
turn to ignition
wait few seconds until you hear "kapak"
All done!
@@melvinbilasanobudgetarian3507 sir, pano naman po yung programming para sa remote lock pag ambiente?
400 siningil sakin
Gumana ito sa 2016 ford ambiente
Key1: orig w/o remote
Key2: orig w/ remote
Key3: new w/ remote
Automatic na po bang gagana yung autolock? Or may additional procedure pa? Thanks
Gud am! Sa pag start ng susi gumana ang key 3? If yes, paano po naman procedure sa keyfob or remote ng key 3? Wala kasi lock ang key 1. Key 2 lang meron. Paano po ginawa nyo?
@@juliusaustria8568 napagana ko na sa akin. For ambiente, sundin mo lang yung process na namention sa description, automatic na gagana na yung remote ng duplicate (3rd copy). In short, mas madali mag duplicate sa kanya
Sir pwede po ba yan sa ranger t6?
pwede basta ford 2007 pataas
Paps paano pag isa lang yung key fob meron bang pagpapa programan ng 2nd key thanks sa sagot
paps kahit isa keyfob, basta dalawa ang key. kagaya ng ambiente model, isang keyfob saka isang key lang na walang remote gumana.
pero kung isa na lang talaga keyfob mo wala na extra key ay may solution pa din.
sa ford pwede kaso mahal.
kung naka join ka sa fecp page sa fb, meron dun nagpoprogram, home service pa. medyo pricey pero hindi kasingmahal ng sa casa. kung maaalala ko ng tama ay nasa 5k+
Sir pano pag iisa nalang ang original key? Help sir..
Hindi pwwde po..dapat dalawa
@@lester4752 na try mo na sir?
@@JrapMotoVlog yes sir.
@@lester4752 anong ginawa mo sir para mapagana ang isang key? Sa casa talaga dalhin?