The Crawford Billet Power Blocks raise your intake manifold, lengthening the intake runners. 💪🏼

Поділитися
Вставка
  • Опубліковано 1 жов 2024
  • - Full Force Metal Works High Clearance Hybrid Bumper
    - Anvil 4,500 W/ Synthetic Rope
    - 2x 8” Rough Country Bumper Lights
    - Nilight 20” Light Bar Mounting Bracket
    - Lensun Solar 65w Solar Panel W/ 20amp MPPT
    - ASPL 29.5" 54 LED Strobe Light Bar Double Side
    - Rhino Rack W/ 2x accessory bars
    - AAIWA 14” 60w Light Bar
    - 3x 48” INNO Cross Bars
    - Muge Racing Oil Catch Can
    - AEMA cool Air intake
    - Crawford Performance Billet Blocks
    - Torque Solutions Pitch Stop
    - Torque Solutions Front & Rear Strut mounts
    - Ironman 4x4 C-Spec 2” Suspension
    - Anderson Design Fabrication 1 3/8” Strut Spacers
    - Duralast Universal Racing Hood Vents
    - Crawford Performance Rock Sliders
    - LP Aventure MODIFIED Bumper
    - LP Aventure FULL Skid Plates, Front & Rear
    - Ironman 4x4 6ft Awning
    - Yakima 7g Road Shower
    - Baja Design Sport Squadron Ditch Lights
    - 42” Rough Country Light Bar
    - Dirtcom Trail Swing W/ drop down table & trail bracket
    - Borla Cat-back Exhaust
    -Nomad Kitchen LT Pantry
    - Set Power Fridge Slide Out - Set Power PT45 Dual Fridge/Freezer
    - Orbis Overlanding 2x Rack Wings
    -ADF Fire Extinguisher Bracket
    - Kidde ABC Fire Extinguisher
    - Rotopax 2x Two Gallon Water, 1x Three Gallon Gas, 1x Two Gallon Storage Pack
    - Rock Slide, for Umbrella
    - WeBoost Overland Cell Phone Booster
    - Kumho Road Venture AT 52s 265/65/17
    - Yeti Overland Blanket
    - TJM USA Yulara Roof Top Tent
    - OEM Rain & Bug Gaurds
    - ECCPP 1.5” Wheel Spacers
    - Alpine iLX-f309
    - Vtoman Jump 1000 Battery & X7 Jump Starter
    - Wanderlost Portable 3 Gallon Water Tank W/ Rechargeable Faucet
    - HikeIt XS Premium Throttle Response
    - Thorton Power Performance Chip Tuner, Stage 3
    -NashFabCo Rear Ladder, Version 2 W/ roto pack swing mount and pivot side step
    - Torxe 39” Tinted Sunroof Visor
    - Tacticool 2x Car Seat Back Molle Organizer
    - TACNEX Molle Panel Car Seat Headrest
    - MOCHENT Dashboard Mats
    - TintWorx 5% Tint all the way around
    - Mixsuper Custom Fit Window Shade Subaru Forester
    - CruxMoto Yellow Fog Light tint and rear wing Topography Pattern.
    - OPT7 Rear Break LED Spoiler Light
    - BUNKER INDUST. 4x 23” Traction Boards
    - ALL-TOP 2x 42” Recovery Traction Boards
    - Flame King 5lb Propane Tank
    - Power Tank Propane Bracket
    - MENSI Propane Quick Connect Adapter
    - RhinoUSA 14pc Tire Repair Kit
    - RhinoUSA Ultimate Survival Shovel and 3/4” D-Ring Shackles

КОМЕНТАРІ • 24

  • @Albuermeduardo
    @Albuermeduardo 11 місяців тому +2

    i want to gain at least 15-20 horsepower. How can I achieve that on my 2014 Forester?

    • @Subie_OffXroad
      @Subie_OffXroad  11 місяців тому +1

      I cat back exhaust or full exhaust if you have the money. Definitely a cool air intake which will give you a couple horsepower at a higher rpm, the billet blocks says it gives me a couple at 3 1/2 RPMs and up. Higher octane, gas and if you really want to go for it find a turbo for that sucker. They’ll give you a lot more than 15 to 20. 💪🙌

  • @ericdavisii3912
    @ericdavisii3912 Рік тому +1

    Is this for the fa24?

  • @shreyaselamanchili9988
    @shreyaselamanchili9988 Рік тому +2

    What does it do

    • @Subie_OffXroad
      @Subie_OffXroad  Рік тому +1

      Improves Acceleration
      Decreases Delay between Shifts with AT
      Increases the Volumetric Efficiency of your Intake Manifold
      Maximizes the Potential of Aftermarket Intakes

    • @Subie_OffXroad
      @Subie_OffXroad  Рік тому

      The Crawford Billet Power Blocks raise your intake manifold, lengthening the intake runners. This increases the volumetric efficiency of your manifold, which provides optimum airflow so that your engine receives as much air as your intake (OEM or aftermarket) can throw at it. (I have AEM cold air intake)
      Tested on and off a Dynapack Chassis Dyno

    • @PoleVaultProject
      @PoleVaultProject Рік тому +1

      How do you like them?

    • @PoleVaultProject
      @PoleVaultProject Рік тому +1

      @@Subie_OffXroadhow are they now?

    • @Subie_OffXroad
      @Subie_OffXroad  Рік тому

      @@PoleVaultProject I have zero problems with them. Glad I put them in

  • @Brandonlopzz
    @Brandonlopzz Рік тому +1

    Any horsepower and torque gains from it?

    • @Subie_OffXroad
      @Subie_OffXroad  Рік тому +1

      It comes with a test print out and says gains 5-6hp at 2-5rpms.
      I can’t personally tell a difference but it’s sucking in a little more air so it’s got to be doing something right? It says no need to tune it. Gives a little more Gives it a little more growl, that’s for sure.

    • @Brandonlopzz
      @Brandonlopzz Рік тому +1

      @@Subie_OffXroad I have a OFT tune and UEL header with a muffler delete do you think I can add this on or is it meant for stock cars?

    • @Subie_OffXroad
      @Subie_OffXroad  Рік тому +1

      @@Brandonlopzz I also have a muffler delete (Borla), AEM intake and a HIKEIT performance throttle controller.
      It would be perfect for you, it wants more air.
      I bet it sounds great with those headers!

    • @Subie_OffXroad
      @Subie_OffXroad  Рік тому +1

      @@Brandonlopzz do you have pitch stop mount for transmission? If not, highly recommend.

    • @Brandonlopzz
      @Brandonlopzz Рік тому +1

      @@Subie_OffXroad yeah it definitely sounds like a Subaru now with the UEL header sounds amazing! I do need those mounts you mentioned because I feel like the transmission is super wobbly