METZELER CRUISE TEC TIRES AND GALFER BRAKES INSTALLED ON MY 2019 ROAD GLIDE SPECIAL! *MUST HAVE*
Вставка
- Опубліковано 5 вер 2024
- I installed a set of Galfer Waved Rotors, Brake Pads, and Metzeler Cruise Tec Tires on my 2019 Road Glide Special. These are a must have for your performance bagger build! Make sure you browse the channel and subscribe! As always, Thanks for watching!
Follow me on Instagram @dooworkmotorsports
Metzeler Cruisetec Tire
Front - 130/60 - 19
Drag Specialties Part #0305-0662
Rear - 180/55 - 18
Drag Specialties Part #0302-1301
Galfer Brake Rotors and Pads
Front - DF835CW-B
Rear - DF681CWS
Pads - FD369G1370
#Metzeler #CruiseTec #GalferBrakes #DooworkProductions
that bike looks awesome!! well done!
Thank You!
You need a different cruisetec for the rear. The load rating of 74w is not for the Roadglide you need the 80H. I fitted the 74w and the bike was everywhere as the sidewalls were not strong enough for the weight of the glide. Metzeller do the crusietec 80H Reinforced for the Roadglide
I just learned it’s much easier to remove rear shocks to remove the rear wheel. Gives access to the swing arm without removing exhaust!
Or, you can take out the lower shock bolts and let the wheel drop down to remove the axle. Reinstall, reattach shock bolts, adjust belt. Then lock left side axle using a third hand tool (cheap on ebay) and an off set 36mm axle wrench with the torque wrench attached at a 90* angle. Less hassle
Been following the channel for awhile, love all the bagger content. Riding a 2020 road glide special and you’ve given a lot of good info.
Thanks for your support!
I have the Galfer rotors on the front of my RGS, I will replace the back one when I do the next rear tire change as well.
Good to see another upload from you sir !
Looks good man. I was planning on doing the galfer rotors too. when I have to change tires. Can’t wait to see you do the 128 build because that’s something I’m also planning on in the future with my 2020 road glide special. 👍
You have your bike looking good man, those Galfer Rotors look great! Enjoy Daytona..
Bikes lookin good. You definitely need to upgrade your suspension. That will make a huge difference. I did the Legends and its awesome. Night and day difference.
I hope you had a chance to visit Trask Turbo that might be another option on performance power! Keep up the good content!
F’n mean motoscooter‼️🤣
Very clean man!
I like everything your doing, can’t wait to hear about the brakes, that’s my next upgrade so will wait to hear if it’s worth it. I am surprised you don’t have aftermarket suspension though.
I just installed some new shocks in Daytona, stay tuned for the next video :) I haven't had time to edit content from Daytona yet..
@@DOOWORKPRODUCTIONS sweet!! I missed Daytona, had my wedding/honeymoon instead lol
I ride pretty hard on my FXLRS, changed brake pads around 12k I’m at 14k now, just ordered a set of Galfers to help me handle high speed maneuvers, along with a easy pull clutch and brake lever kit. Hopefully those do the trick! 120/120 hp/tq ain’t no joke on these machines.
128 soon to come as well, saving up for it now.
Let me know how the rotors do!
The details are what makes your bike 🔥
And love thoses rotors
Great video man, a lot of good info in here
Rotors look cool and look like they'll dissipate the heat well. I will be needing new tires soon on my 19 limited so I'm curious to see how those tires are. I love my parelli night dragons on my 08 fatboy and was going to go with them but I'll stay tuned for the review on those tires.
just had to change my rear and pads at 4500 miles.. same tire you got..
Subscribed to see your thoughts on the rotors and brakes 👍🏼
I absolutely love everything about this bike. You did an amazing job on this I love how subtle everything is. What size are the numbers on your side cover. Thanks for everything you do really enjoy watching your channel. I'm sure we don't live too far away from each other I live just west of Cleveland.
Thanks for your support! The size of the numbers on the side panels are 3" tall by 2" wide.. Brian at Choice Cycle can make them for you.
@@DOOWORKPRODUCTIONS question about your Galfer front rotors. If I punch in the part number you posted on you video, Front - DF835CW-B, Galfer website says it won’t fit my 2019 Street Glide Special, even though I have the exact same wheels you have on your road glide. Any suggestions? And where did you order your rotors from?
@@dougpeterson4804 I got them from a local shop near me. If you have the same wheels as me, you will want to go with the part number I provided. Most likely their website is thinking you have the standard wheel which would have a different rotor.
Leaving March 4 for Daytona from Michigan I’ll be at the Harley shop Monday at noon getting a radio sound system installed if you’re around I’ll be looking for you
How did the galfers do?? Did h notice a huge difference performance wise i knkw they look sick but i wanna knkw are they actually that much better than stock for braking power??
They definitely helped!
My OCD 🤣🤣 me too! The bike looks awesome my friend, I have a question awhile back you did a video replacing the lights in the gages, Will you be able to send me a link who to contact, Thank you have a great time in Daytona.
Jim at Gauge Modz..
I’m about to get a set of Metzeler CruiseTec tires. Stage 2 bike. How did you like the rear radial tire? Do you recommend me getting a radial rear or reinforced B tire? Have you had any issues with radial rear? How many miles does it last?
74w tires will do tank slapper at high speeds should be careful... it should be 80H
Bike looks good 👍. I’m currently doing the fairing spoiler with the chopped crash bar, along with the upgraded fan assisted oil cooler. Contemplating a 131 kit?
Definitely don’t have to remove all that to change the tire.
Are running into any problems with that rear radial. I don't go to the track. I just do regular street riding. Should I just go with both bias?
I had no issues with mine! Loved these tires!
Also who is going to do your 128 , S&S or other . Your bike looks great .
Where did you get the #1 tank sticker??
Brian at Choice Cycle.
Hello sir
Great video!! I also have a Road Glide cvo and want to order the DF835CW. I saw you put aluminium Galfer on your bike what is better or smarter to do aluminium DF835CW or steel DF835FLW Galfer brakes?
Hope you can help me make a choice..
Gr
Where you been bro wow still have the factory shocks ?
I’ll be down there
Just got the cruisetec tires for my 2019 RGS. How are they working out for you?
They worked great!
Front tires should last twice as much as the rear. Very low mileage on the front to wear out. You check your air pressure much. Should get at least get 25k on the fronts.
Hello , whom did you go through for your Galfer parts , I would like to do a 1 stop shop purchase for rotors and brake pads for a '17 RG . Thanks 👍
Are you local in Michigan?
No , I'm in North Carolina .
@@johnhairfield849 I'm sorry, I don't know of any good shops in NC to order all of these parts through. I would just order everything online and then either install it yourself or take it to a dealer or reputable shop to have the parts installed.
Tried the radial cruistec on my cvo road glide and it felt like i was riding on a flat, switched to bias. Problem fixed. I was told the radial was not built for a bagger.
I feel that.. However, it hooks good on the street, doesn't spin at all!
My only issue with galfer is their contract process for sponsorship even after a contract you still pay 50%
#notsponsored
Nice. Really surprised you have the stock shocks though
Check out some of my recent videos.. I upgraded to Ohlins Suspension!
Cant find the CWB rotors on the front
When you changed the front/rear rotors, did you reuse the stock harley rotor bolts or buy all new bolts?
I re-used the stock Harley bolts..
@@DOOWORKPRODUCTIONS ohhh ok thank you... the bike looks amazing!!!
@@ocdhd2411 Thank You!!
We’re did you get the 1 decal got the gas tank ?
Brian at Choice Cycle. He custom makes decals.
You should have put the rotors on before they were balanced.
Wait so each rotor is $300 ?
Yes
First !!!
Did you need any additional hardware to get the Galfer rotor to mount to the stock wheel?
Nope
Did you put the stock rotor bolts back on or get different ones?
I used the stock ones
Where did you buy the front calliper brackets and the fear bracket ?
Factory
@@DOOWORKPRODUCTIONS how about the front brackets factory too? By the way your bike is one the best I’ve seen so far
@@DOOWORKPRODUCTIONS thanks again
@@Ray-pw3yh Yes! Thank You!
Did you need to run a spacer for the caliper’s?
Nope.
Doowork did you regrease your tire axles and if so what type and how much
Yes I did. I used Maxima assembly grease. Just a light coating.
@@DOOWORKPRODUCTIONS big thanks
@@DOOWORKPRODUCTIONS big thanks
How do you like the crusetec. I just put Them on my road glide 2019. And i drive like shit.
I love them!
The dealer did not put the right pressure In it. Now the are like a Dream. Could not understand why they were so bad. When everbody says they are great👍👍thanks for answer
Meant rims axles