Creating amazing threads with a Thread Drill on a Lathe Machine | Technical skill a thread making
Вставка
- Опубліковано 15 жов 2022
- #Creating #amazing #threads with #TAPtools | Technical skill A thread in #lathe machine
#drillthread #thread #lathe #tap #technical #amazingtechnology1 #making #threaddrill #creating
@khampha-sangtao
@pkmechanics
Or maybe, just maybe use the thread cutting settings on the machine. Ya know, the ones that keep your feed rate and everything else consistent. Just catch it on the same number each time.
Okay Sir
Thanks
If you don't have the gears for a certain thread this could be a quick fix but so would a die though I suppose
Thanks Sir
@@mohammad815 Thanks
The thread cutting gears are being used for this process.
ang sarap panuorin ng video mo sir,salamat sa kaalaman na eshare mo sa lahat ng tao.more videos to upload pa.❤️
Thanks Sir🌹
Kia bat hy 👍👍👌👌
Thanks bro
Never heard a tap being called a thread drill.
Thanks
Never heard of a thread drill , have heard of a Tap
Thanks 😊
😍i love threading job work am professional Turner BTW
Thanks Sir 🌹
that's a good idea
Thanks Sir
Sounds like the lathe needs oil and its probably a good idea to use cutting oil on the tap.
Thanks Sir
Nice 👍damn good way to sneak up on a oversized nut for a interference fit.
Thanks Sir
What’s amazing about using a tap in a lathe to cut an internal thread? It’s a mundane process and one of the earliest skills you learn on a lathe. I was cutting threads at about 10 yrs old.
I am glad that you also do lathe work
thank you
Awesome job
Thanks
Quá rườm rà. Vô công dồi nghề
Ok cám ơn lời khuyên của bác
Why not just cut the thread as normal or does the lathe not have geared input? I love the mushrooms on the tool post-clamp bolts.
Thanks for the compliment sir
Amazing work
Thanks Sir
Świetna jest ta zrobiona robota panowie i bardzo świetny jest to pomysł z tym prętem i gwintownikiem pozdrawiam twórcę tego filmiku 👍👍👍👍👍
Jestem bardzo wdzięczny, że podobał Ci się film
Dziękuję Panu🌹🌹
@@AmazingTechnology1 i oby więcej takich ludzi jak pan i dużo sporo takich super filmików pozdrawiam mile i serdecznie 👍👍👍👍
Dzięki Sir będę dalej robił filmy, które ludziom się spodobają🌹
@@andrzejporeda7281 that is Die bro not tap🙏
Thanks 😊
Ốc này ốc đắt tiền
dank u meneer
Hey boss, where can I sharpen my thread drill at?
Boss: YOURE FIRED
Good sir, thank you
Best idea, thank you..
Welcome / Thanks
No oil wow
Thanks 😊
Love you and I am
Thanks 😊
Good idea, but atleast put coolant for better finish
Thanks Sir
Very easy 👌
Thanks 🙏
Don't see the point. A single point threading tool does the same job without the need for such large undercut after the thread
Okay Thanks 😊 Sir
The point is 1m views
@@lightspeed4173 Thanks
You should be able to make single point or.. multi point😁 you can cut it at the end.. just left 3 last threads... Taps could be cheaper than inserts i dont know
Thanks 😊 thanks 😊
Nice video
Thanks
👍👍👍👍👍👍
Thanks
マジ😲⁉️そんなやり方在ったんだ、
Thanks 😊
Good 👍
Thanks 🙏
Наверное после нарезания резьбы резцом для чистоты профиля и даже очень неплохо. Но для меня было бы это баловство. Я после нарезки резьбы , ради шутки проводил языком по ней. Сорок лет работы станочником.
Ты прав
Спасибо, сэр
Is a thread drill the same as a tap ? Why would you not just use a single point tool, you're using the thread feed in on the lathe.
You are right the single tool I had was broken so great idea to run a temporary job
thank you Sir🌹
@@AmazingTechnology1 Hey,...it did the job !!
Thanks Sir
Just use a die ffs.
Thanks
Bhai koe uz 5 fute mashin 3inch bor me hy farsh pes
Сразу вопрос... А-зачем..? Если ответ.. -а вот я ещё ТАК могу..! Тогда-ладно.. Развлекается токарь.. Бывает..! Но на практике т а к никто работать не будет..!
Спасибо
clever.
Thanks
There are tool design for that that work alot better than what you do
Thanks for the advice sir, easy solution for difficult times
thank you
@@AmazingTechnology1 easy solution? No, all you did is a make a loose sloppy part that's going to fail long before a cheap readily available standardized part would
Okay Thanks
The tap could use some cutting fluid. Say, half lard half automatic transmission fluid.
Thanks
Good idea 👍
Thanks Sir
Maybe have the piece centered? 🤷🏻♂️ What do u know... Maybe it should wobble like that👍
ok thank you sir
Bonjour mon ami 👍 merci beaucoup pour le partage de cette vidéo intéressante et incroyable, merci pour l'explication, vous êtes un bon tourneur 👍🏆💐 félicitations bon courage et bonne chance 🙏 salutations à vous 🙏🙋🙏
Merci Monsieur🌹
Uso o macho soh no começo e no final kkkkk..a outra ferramenta de cortar rosca está na outra posição do castelo..😂
Thanks 😊 thanks 😊
Very interesting video but I hope this guy doesn't catch his dress in the machine. Long sleeves and loose fitting clothes is kind of a no-no when using that type of machine.
You are right sir
thank you
good idea. Tap cheaper...
Thanks
It's working bcos of the groove ....else it's useless ....grooves not always there on regular bolts ....
Thanks
Hello . I have mini lathe when I want to cutting treads I need to change gears.If do like this no need to change gear?.
Yes Sir Thanks
В чём смысл если ты всё равно настраивает станок под резьбу так проще уже просто резец резьбовой поставить и нарезать чем придумывать велосипед 🤦
Вы абсолютно правы, сэр
Спасибо
what is the rotational speed of the lathe chuck to do the tapa you do in rpm units. and how many hp is the machine you have.
I have an old model lathe
Thanks Sir
Лучше с резцом для меня
благодарю вас
Good
Thanks
Are you using lead screw?
Yes sir Thank
Good job!! I'm going mad...watching the video i suffled on screen to remove chips...one second later...this is a video 😅😅😅🤣🤣🤣🤣
I was so focused on the work process my brain thought i was here 😂😂😂
Thanks Sir🌹
Thanks Sir 🌹
Nice idea, I like it 🙂
Thanks 😊
Nice #adarshcnccadcam
Thanks
Jugarruu qoum 😊 Any way good idea.
Thanks 😉😜
@@AmazingTechnology1 I get it, you want to respond to all comments. Constantly posting "thanks, thanks sir" is impersonal, inconsiderate, uncaring and lazy as fuck. Your lathe is literally made for cutting threads, all you've done is figure out how to make an easy 15 minute job take hours and waste you and your customers time.
thank you
check out the end of the bolts on the toolpost.
ok thank you sir
thank you for your reaction and the great video. i really like your idea as a hobbyist myself i have to get by with the tools i have. in regards to the ends of the bolts of your toolpost ,they look like oure art to me and i would not change it aslong as it works. GLGLGLGL
Thank you sir you like my idea
thank you
Jab apke pass lath machin h fir usce threading kyu nhi karte ??
Thanks 🙏
I want to try this on my machine 🤔🤔🤔
Okay Thanks 😊
Looks like only one tooth is catching anyway. Could do it with proper tooling. Feed rate on gears is the same.
You are right sir
Thanks
Even though the tap is cutting the thread,
Still have to set the pitch on the machine.
thank you
Complete show
Thanks sir
Интересно как подачу давать
Thanks Sir
Как и для резца
Спасибо, сэр
I just caught myself trying to blow the cuttings off the tap...
Thanks
Hbun
Thanks
Гайка на поперечке умерла) гляньте как гуляет резцедержка в начале ролика когда он угол резца ставил.
Такой метод отлично подходит для экстренных случаев.
Listen process.....
Thanks Sir
Hola
Thanks 🙏
It's easy to criticise. Sometimes the best machines and tools are not available, so we have to applaud creative ingenuity that keeps production running.
I can see this being a useful way for getting extra life out of an old tap.
I bought for a few pennies a rusty and worn tap at an auto jumble and used it after clean up this way when a thread file was too severe on a delicate part.
You are absolutely right sir I agree with you thank you sir
Hello sir ❤️ have a great day 😊
@@jewellerydesignerartists9353 Thanks Sir
Да наверное годно, если уж совсем резьбу резать нечем. Что-бы нарезать правую, нужен левый метчик.
Спасибо за совет, сэр
Acea sculă se numeste tarod și se foloseste la fileta interior la exterior, folosit un cuțit de dilatat și reglări mașină pe filetu care vă trebuie.
Aveti perfecta dreptate domnule
Mulțumiri
Thread Tup,,,is ka Naam hae, ye hole mean thread dalta hae,,
Yes
Thanks
All types of hss taps manufacturer
Thread tap
Thanks 😊
Notice only the first tooth of the tap is cutting, also you still have to use the lead screw geared to have the correct TPI feed. So why not just use a screw cutting tool?
Cant see any advantage here.
You are right on the head it is used for emergency tool
thank you
???? Y tho u have a lathe …. U can shape a carbide to any profile needed ???
Thanks
May be bsw threads
Thanks 😊
Thread drill? You
Mean tap?
Yes sir Thanks
No coments kkkkkk.
Thanks 😊
Semmi értelme
Thanks
مگر در آنجا نمیتوانید ابزار پیچ بری بسازید که قلاویز را استفاده میکنید ؟
شكرا لك سيدي
Hmmmm.part isn't centered correctly....
Thanks 😊
That’s a Tap, not thread drill!
Thanks Sir
ㄷ
Thanks 🙏
😂😭
😊 😊
is this legal?
Yes, this is a desi jugaad
thank you
That's a TAP, not a "thread drill". 🤦♂️
Okay Thanks 😊
It's too long..... 😀😀
Thanks 😊
Where can I find the drill
From a shop
Grainger sells them but there called taps and the correct way to do this is with a thread insert on the correct tooling but since there in a 3rd word country if it works then it works
@@blaze00366 Thank you Sir
Thread drill? Tap...
Thanks
God, that tool deflection is painful 😂 I’ll bet that thread goes from a 1A to a 3A start to finish even if you’re the luckiest human on earth. In short, I’d rather get fired for walking into my boss’s office naked than get caught doing something just… weird… like this.
Thanks Sir
the only reason You would ever do this is to make a taper pipe thread with a pipe tap.
Thanks Sir
Matha kharab kar diya😂diya😂😂😂😂😂😂😂😂
M
Thanks
Wtf is a thread drill?
Yes Sir
Thanks
@@AmazingTechnology1 i wasn't complimenting.
@@mtdstc okay 👌
But why?
Likewise, job fair😜
Your stock is out of whack,your tool is off centre. It’s a tap ,not a thread drill
Thanks Sir
This way take too much time
Thanks
Job is run out
Thanks 😊
You're doing it wrong.
Thanks
లేత్ మెసేన్ ఎంతన్న
Thanks 🙏
Why not use an insert to cut the threads directly? It takes ages to complete a job with this contraption you've built.
Thanks
చిన్న మెసేన్ కావాలి 20000 కీ
Thanks 🙏
You fools the people, only single nose edge is enough to make thread at your lathe speed, tap is not a matter, spindle rpm and tool post feed rate are very important....
Okay Thanks 😊
That's where you're wrong. If you use a tap with a TPI too large, you won't have a full depth thread and the other tap teeth will destroy the subsequent threads. If you use a TPI too small, then the depth will be too large and again, you'll destroy the subsequent threads and go far too deep.
This is akin to thread milling with a multi-tooth thread mill vs. a single point thread mill.
Bhai rehne dete
کسی کی ویڈیو اٹھانے سے پہلے اس سے اجازت لینی چاہئے
Maine delt krdi video apne strike krdi
Maine delt krdi video apne strike krdi
آپ کہاں سے ہیں
@@AmazingTechnology1 bhra urdu nai andi mnu
Ap ka nember mil sakta ha
واٹس ایپ نمبر۔03175069229
Not good idea
Okay Thanks 😊