I have the ets extreme www.subispeed.com/part/catback-2015wrxsti-parent-ets-catback-exhaust-system?gclid=Cj0KCQjwr-SSBhC9ARIsANhzu16UEaFpFf8FdFf2eCPs46K50TBPW-if_hIoGU58ZwNqM7p7zw35ImQaAkJuEALw_wcB#.YlnZEKROm_Y
At work so i have to keep the video muted, I have HID Low beam bulbs, do these use their own lights without the bulbs or do they use the function of the bulbs to project through the housing?
Do they connect to the stock plug or is it different, i was wondering if you can post a video showing how they are connected cause i been thinking of getting these but in my setup my fog lights are connected to my headlights so i wanted to see if these connected to stock plug!
These are direct plug and play into the stock wire harness. The new headlights have a separate wire coming from them for the drl, which they supply the plug and play to the fuse box needed for that, as well as, a separate wire and plug and play harness needed for the turn signal, should you decide you want to also run the integrated turn signals. Do you have an IG?
I am sorry. But I am a math teacher and do not work for the company that makes them. My suggestion would be to contact subispeed via email. I had 1 bad tail light and they replaced it after I jumped through the designated hoops. I wish I could be more help.
Did you have to adjust yours ? mine came pretty off and its a pain in the ass to adjust the height since its located on the bottom part behind the headlights
@@rbooker1990 wait do you need a screwdriver to adjust it or no? The reason is because when I installed mine, the passenger headlight was being blocked by the air flow box so I just turned the thing a bit to make room.
@@nathanjasso4113 yeah. They have a bolt like shape, so I just gripped the sides and turned them, I believe counterclockwise to raise them up until I was satisfied. I am lowered about an inch and a half
I heard these headlights won't fit in the car if you still have the stock intake assembly. Can you confirm this, or will they fit with a stock intake? I want them for my wrx and I can't void my warranty right now so I need to know before I buy.
When I installed mine, I had a Cobb intake. So I really can’t confirm this. I have heard that it does not fit, but depending on your level of DIY, the way I see it, modifications can always be made. I would say that this is more of a question for subispeed themselves. I know they kinda take forever to reply sometimes though..... sorry I couldn’t be more help.
Ahh there it is. Thanks for posting this. Helps a ton to get a real idea of how they perform.
just bought a pairs after watching this clip. thanks !
This one I understand much more. Still very informative, looking forward to the next one 😎
Thank you very much, kind sir.
Thanks I’ve been looking for this
No problem
Thanks for the helpful videos! I just bought these? Only question for me is the add a fuse part.
If you have an Instagram, I can show you and explain it there
@@rbooker1990 sure! It’s @m.rxsco
man that cutoff is foggy as heck you should adjust the orientation of those bulbs and see if it will clean it up
What exhaust do you have? Its sounds good. I have the Invidia n1 but I just don’t think it’s loud enough for me personally.
I have the ets extreme
www.subispeed.com/part/catback-2015wrxsti-parent-ets-catback-exhaust-system?gclid=Cj0KCQjwr-SSBhC9ARIsANhzu16UEaFpFf8FdFf2eCPs46K50TBPW-if_hIoGU58ZwNqM7p7zw35ImQaAkJuEALw_wcB#.YlnZEKROm_Y
At work so i have to keep the video muted, I have HID Low beam bulbs, do these use their own lights without the bulbs or do they use the function of the bulbs to project through the housing?
They use their own lights. Direct plug and play.
Holly shit BRUH..... those are going to blind someone!!!!
I’m buying em 😂😂😂
😂 😂
Do they connect to the stock plug or is it different, i was wondering if you can post a video showing how they are connected cause i been thinking of getting these but in my setup my fog lights are connected to my headlights so i wanted to see if these connected to stock plug!
These are direct plug and play into the stock wire harness. The new headlights have a separate wire coming from them for the drl, which they supply the plug and play to the fuse box needed for that, as well as, a separate wire and plug and play harness needed for the turn signal, should you decide you want to also run the integrated turn signals. Do you have an IG?
@@rbooker1990 yeah chava_gar256
Hey man I recently have installed these headlights and my passenger side low beam isnt working. If it is a bad bulb how would I replace it???
I am sorry. But I am a math teacher and do not work for the company that makes them. My suggestion would be to contact subispeed via email. I had 1 bad tail light and they replaced it after I jumped through the designated hoops. I wish I could be more help.
can you change the led bulbs? or is it fixed
They are fixed. But adjustable.
@@rbooker1990 so if one of the leds go bad you'd need an entirely new headlight?
@@Drazx3 indeed. But it be like that sometimes ¯\_(ツ)_/¯
Thanks for the quick post. Just what I’ve been looking for and you might be the first person to have actually posted output of these lights.
No problem!
Did you have to adjust yours ? mine came pretty off and its a pain in the ass to adjust the height since its located on the bottom part behind the headlights
Yes I did. I know, typically with lowered cars, adjustments have to be made.
@@rbooker1990 If you adjusted them after installing how did you reach the bottom part ?
@@skandernouali I actually did it before 😅 I had a lowered ST before, and knew that it had to be done. So I turned it about 540 degrees.
@@rbooker1990 hahahah well done then ! I am the dumb one 😂
How do you adjust the headlights?
At the back of the headlight, there is a dial that can be turned clockwise and counterclockwise to go up and down.
@@rbooker1990 wait do you need a screwdriver to adjust it or no? The reason is because when I installed mine, the passenger headlight was being blocked by the air flow box so I just turned the thing a bit to make room.
No, I used pliers to adjust mine.
@@rbooker1990 pliers? I had the instructions to adjust it but threw it away by accident. Haha
@@nathanjasso4113 yeah. They have a bolt like shape, so I just gripped the sides and turned them, I believe counterclockwise to raise them up until I was satisfied. I am lowered about an inch and a half
I heard these headlights won't fit in the car if you still have the stock intake assembly. Can you confirm this, or will they fit with a stock intake? I want them for my wrx and I can't void my warranty right now so I need to know before I buy.
When I installed mine, I had a Cobb intake. So I really can’t confirm this. I have heard that it does not fit, but depending on your level of DIY, the way I see it, modifications can always be made. I would say that this is more of a question for subispeed themselves. I know they kinda take forever to reply sometimes though..... sorry I couldn’t be more help.
@@rbooker1990 it's ok but thanks for the quick response 👍
@@thatoneguy9842 did they end up fitting with stock intake? I have same car
@@hetts_ bump, I’d like to know as well
@@Jeff-um5gg they don’t fit
I’m looking into getting these,how was the plug and play?
Easy. Too easy. Nice and clean, no splicing. They provide you with everything you need. The hardest part is unplugging the stock lights lol